2. Haworth
  3. 7029-9938

Haworth 7029-9938 Operating instructions

  • Hello! I've reviewed the installation instructions for the HWSLS99 open-sided shelf from HAWORTH. This document covers installation for both 1.5 High and 2 High models, detailing the necessary tools, wall mounting techniques, and alignment guidelines. I'm ready to answer your questions about the installation process.
  • What tools are required for installation?
    What are the components of the kit?
    How many screws should be used per cleat??
#2
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
1
Open Sided Shelf - 1.5 High & 2 High Shelfs
Installation Instructions
1 of 4
SUITE®
Tools Required
KIT OF PARTS
FOR MULTIPLE SHELVES - THE LABELS ARE SEQUENCED FOR INSTALLATION
560-045 7029-9938
1
ShelfB
Wall Cleat
A
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWL
Y
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWL
Y
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWL
Y
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWL
Y
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWLY
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWLY
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWLY
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWLY
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWL
Y
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
FOR SINGLE SHELVES
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
12 of 4560-045 7029-9938
2
NOTE: Install a minimum
of 3 screws per cleat (A).
X - Z = A
A
B
A
X
Z
B
Specic Instructions for Wall Frame Construction
A. Wall with Wood Stud Framing or 3/4” Plywood Surfaces:
Wall mount kits must be attached to either wood studs in wall or 3/4” thick
plywood securely attached to studs. Attach the wall mount kit using #12 x 2-1/2”
long pan head screws. Use longer screws if required to securely anchor the wall
mount kit to the wood studs.
B. Wall with Gypsum Board, Sheet Rock or Wall Board with Metal Stud Framing:
Wall mount kit must be attached to metal studs. Use either 2” #10 sheet metal
screws or 2” #10-24 TEKS self-drilling screws.
FOR MULTIPLE SHELVES
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
13 of 4560-045 7029-9938
3
NOTE: Install a minimum
of 3 screws per cleat (A).
X - Y = A
X - Y1 = A
A
B
A
X
Y
Y1
Specic Instructions for Wall Frame Construction
A. Wall with Wood Stud Framing or 3/4” Plywood Surfaces:
Wall mount kits must be attached to either wood studs in wall or 3/4” thick
plywood securely attached to studs. Attach the wall mount kit using #12 x 2-1/2”
long pan head screws. Use longer screws if required to securely anchor the wall
mount kit to the wood studs.
B. Wall with Gypsum Board, Sheet Rock or Wall Board with Metal Stud Framing:
Wall mount kit must be attached to metal studs. Use either 2” #10 sheet metal
screws or 2” #10-24 TEKS self-drilling screws.
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWL
Y
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
2 FOR HEATHER-SW.13 WORKWALL
CAUTION: REMOVE LABEL SLOWLY
Made in the USA
M/File#:
M320670, 674550
HWSLS99
**
Item#:
Desc:
SN:
Tag:
*3206701*
B
INSTALLATION CONDITIONS
DIMENSIONS/ALIGNMENT
BAD: CLEAT INSTALLED TO LOW BAD: CLEAT INSTALLED TO HIGH GOOD: SHELF RESTING FULLY ON CLEAT
NOTE: Shelf is not
resting fully on cleat.
NOTE: Too much gap
between shelfs. NOTE: This is a good
install. Shelf is resting
on cleat and no visible
gap.
A A A
65-1/16”
48-5/16”
29-1/2”
23-3/16”
81-1/16”
2 High Storage
15-1/4”
16”
16”
1.5 High Storage
15-1/4”
15”15”
16”
16”
Rev:
Part No:
Page:
E.C.O. No:
CUSTOMER SERVICE PHONE: 1-800-426-8562
14 of 4560-045 7029-9938
Shelf Alignment for 2 High Storage Shelf Alignment for 1.5 High Storage
/