2. Robertshaw
  3. Dryer Timer CDT-521 to 535

Robertshaw Dryer Timer CDT-521 to 535 User manual

  • Hello! I am an AI chatbot trained to assist you with the Robertshaw Dryer Timer CDT-521 to 535 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION DATA
Dryer Timer CDT-521 To 535
Customer Service Telephone 1.800.304.6563
Customer Service Facsimile 1.800.426.0804
[email protected]
Robertshaw®, Ranco®, Paragon® and Uni-Line® are
trademarks of Robertshaw, its subsidiaries and/or
affiliated companies. All other brands mentioned
may be the trademarks of their respective owners.
For Technical Service
Telephone 1.800.445.8299
Facsimile 1.630.260.7294
[email protected]
www.uni-line.com
www.robertshaw.com
©2014 Robertshaw
12/14 –1-957 Rev B
Before servicing, always disconnect the dryer from its electrical power
source by removing the electrical plug from the wall receptacle, or
by removing the fuse (or switching the circuit breaker to OFF) in the
branch circuit supplying the dryer.
1. Disconnect electrical power source from dryer.
2. Remove 4 screws securing control panel to control housing.
3. Lay control panel face down onto top of dryer.
4. Remove1screwsecuringmermounngpaneltocontrolpanel.
5. Removemerknob.
6. Transferwiringconneconsoneatamefromoldtonewmer
 matchingupterminaldesignaons(AtoA;BtoB;CtoC;etc.)
NOTE:Thereplacementmer,insomecases,willhavemore
terminals than the original. Use only the like marked terminals,
leaving any extra terminals empty.
7. Reassemble parts in the reverse order of their disassembly.
CAUTION
THIS DEVICE SHOULD BE INSTALLED BY A QUALIFIED SERVICE
TECHNICIAN WITH DUE REGARD FOR SAFETY AS IMPROPER
INSTALLATION COULD RESULT IN A HAZARDOUS CONDITION.
/