2. Golden Lighting
  3. 2074-M1L CH

Golden Lighting 2074-M1L CH, 2074-SF CH-CLR Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Golden Lighting 2074-M1L CH Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly Instructions: 2073, 2074-SF (Smyth)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture. For deep cleaning, turn off the light
and remove the glass prior to cleaning. Hand wash glass with warm water and mild detergent. Dry with a lint-free or microber cloth.
For Customer Service, contact
the place of purchase.
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important notes
above.Removetheoldxturefromtheceiling,includingtheold
mountingstrap.
1.Takethemountingstrapassemblyfromthepartsbag.Mounting
strap(B)containsthreadedholes.Twoofmountingscrews(A)should
beattachedtomountingstrap(B).Youmayneedtotightennuts(C)
that hold these screws in place.
2.Placemountingstrap(B)overthejunctionboxsothatmounting
screws(A)arevertical,andinalignmentwiththeholelocationson
thexture’scanopy(F).Securemountingstrap(B)tothejunction
boxwithmountingscrews(D)andascrewdriver.Tightenthescrews
securely.
3.Placethexture’ssocketcluster(R)onaatsurface.Rod(N)ison
thexture’swires,butnotattachedtothebodyofthexture.Pass
thexture’swiresthroughrod(N)andpullthewiresuntiltaut.
4. Twist rod (N) into post (V) until secure. Attach rods (M) to the hooks
(O)onthexture’sbody.
5.Haveanassistantholdthecanopyabovethexture’sbody,then
attach rod (N) to canopy (F). Attach rods (M) to the hooks on canopy
(F).Pushthewiresthroughthecenterofcanopy(F).
FLUSH
INSTALLATION
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
CONNECTING THE WIRES
6.Haveanassistantsupportthexture’sweightwhilecompleting
thewiring.Refertothewiringdiagrambelowandattachthexture’s
wirestothepowersupplywiresfromthejunctionbox.ConnectHot
toHot,NeutraltoNeutral,andGroundtoGround.Twisttheends
ofthewirepairstogether,andthentwistonawireconnector.Make
surealltwistsareinthesamedirection.Ifthereisnohouseground
wirecomingfromthejunctionbox,locategroundscrew(E)onthe
mountingbracket/mountingstrapandwrapthexture’sground
wirearoundthegroundscrew.Useascrewdrivertotightenthetop
ofgroundscrew(E)ontothewiresandintothemountingbracket/
mountingstrap.Tuckthewiresintothejunctionbox.
FINISHING THE INSTALLATION
7.Raisecanopy(F)totheceiling.Positionmountingscrews(A)sothattheyprotrudethroughtheopeningsofcanopy(F).Securecanopy
(F) in place with decorative nuts (G).
8Slidecandlesleeves(Q)overthesockets.Installlightbulbs(notincluded)inaccordancewiththexture’sspecications.
9.Placeglassshade(S)ontobottomcap(T).Raiseglassshade(S)andbottomcap(T)upbeneathbottomassembly(R).Twistbottom
nial(U)ontothethreadsofbottomassembly(R).Tightensecurely.
Yourinstallationiscomplete.Turnonthepowerandtestthexture.
D
C
B
A
S
T
U
M
N
P
O
Q
E
F
G
R
V
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture. For deep cleaning, turn off the light
and remove the glass prior to cleaning. Hand wash glass with warm water and mild detergent. Dry with a lint-free or microber cloth.
Assembly Instructions: 2073, 2074-SF (Smyth)
For Customer Service, contact
the place of purchase.
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important notes above. Remove
theoldxturefromtheceiling,includingtheoldmountingstrap.
1.Takethemountingstrapassemblyfromthepartsbag.Mountingstrap(B)contains
threadedholes.Twoofmountingscrews(A)shouldbeattachedtomountingstrap
(B).Youmayneedtotightennuts(C)thatholdthesescrewsinplace.
2.Placemountingstrap(B)overthejunctionboxsothatmountingscrews(A)are
vertical,andinalignmentwiththeholelocationsonthexture’scanopy(D).Secure
mountingstrap(B)tothejunctionboxwithmountingscrews(D)andascrewdriver.
Tightenthescrewssecurely.
3.Placethexture’ssocketcluster(R)onaatsurface.Rod(N)isonthexture’s
wires,butnotattachedtothebodyofthexture.Passthexture’swiresthroughrod
(N) and pull the wires until taut. Twist rod (N) into post (V) until secure. Attach rods
(M)tothehooks(O)onthexture’sbody.
4.Bymeasuring,determinethecorrectnumberofchainlinksneededforproper
hangingheight.Ifnecessary,useapairofplierstoopenandremoveanyexcess
chain. Attach one chain connector (K) to each end of chain (J). Use one of chain
connectors (K) to attach chain (J) to top loop (L) and close the chain connector.
5.Haveanassistantattachrods(M)tothehooksonthexturebodythenattachthe
hooks of rods (M) to top loop (L). Hook the end of rod (N) onto top loop (L). Pull the
wiresthroughtoploop(L).Feedthexture’swiresupthroughthechain(everythree
linksorso),pullingthewiresuntiltaut.Slidecanopyloopcollar(H)andcanopy(G)
ontothechain/wires.Usethefreechainconnector(K)toattachchain(J)tocanopy
loop (H).
CONNECTING THE WIRES
6.Haveanassistantsupportthexture’sweightwhilecompletingthewiring.Refer
tothewiringdiagrambelowandattachthexture’swirestothepowersupply
wiresfromthejunctionbox.ConnectHottoHot,NeutraltoNeutral,andGroundto
Ground.Twisttheendsofthewirepairstogether,andthentwistonawireconnector.
Makesurealltwistsareinthesamedirection.Ifthereisnohousegroundwire
comingfromthejunctionbox,locategroundscrew(E)onthemountingbracket/
mountingstrapandwrapthexture’sgroundwirearoundthegroundscrew.Use
ascrewdrivertotightenthetopofgroundscrew(E)ontothewiresandintothe
mountingbracket/mountingstrap.Tuckthewiresintothejunctionbox.
FINISHING THE INSTALLATION
7.Raisecanopy(D)totheceiling.Slide canopy loop (H) and canopy loop collar (I)
upbeneaththecanopy.Tightlythreadcanopyloopcollar (I) onto canopy loop (H) to
secure canopy (D) in place.
8Slidecandlesleeves(Q)overthesockets.Installlightbulbs(notincluded)in
accordancewiththexture’sspecications.
9.Placeglassshade(S)ontobottomcap(T).Raiseglassshade(S)andbottomcap
(T)upbeneaththelightsource.Twistbottomnial(U)ontothethreadsatthebottom
ofthelightsource.Tightensecurely.
Yourinstallationiscomplete.Turnonthepowerandtestthexture.
PENDANT
INSTALLATION
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
House Wires
Fixture Wires
Hot
U
R
S
T
A
B
C
H
I
D
J
K
F
E
G
L
M
V
N
P
O
Q
/