Savoy House 3-1773-6-320 User manual

CENTER ROD(C)

CENTER ROD(D)

CANOPY(E)

FIXTURE BODY(A)

GLASS SHADE(B)

ASSEMBLY INSTRUCTIONS

1. Carefully unpack and identify all parts referring to illustration for parts identification.

2. Turn the power to the installation point OFF.

3. Unravel the supply power and ground wires and pass them through the center holes of center rods

(B),(C), and canopy (D).

4. Carefully place the glass shade (B) over the fixture body (A) as shown in the diagram.

5. Align the hole of the glass shade (F) with the hole on iron plate of the fixture body (A), and secure

with screws (G) (not pictured).

6. Thread the bottom of center rod (C) to the fixture body (A). Repeat process for remaining center

rods (C) and (D). Hand tighten until snug.

7. Use quick link (F) to connect the top loop on center rod (D) to the loop on the canopy (E) and twist

the locking mechanism to secure.

8. Refer to the additional installation instructions included with the product for wiring and installation.

9. Install proper bulbs (not included) into each socket referring to the markings and/or labels on the

fixture for maximum wattage.

10. Restore power to the installation point and retain this sheet for future reference.

ITEM NO: 3-1773-6-320

QUICK LINK(F)