Assembly Instructions: 3604-M1L (Duncan)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Carefully remove all of the contents from the carton. See the
important notes above. Shut off the power at the circuit breaker
andcompletelyremovetheoldxturefromtheceiling,including
theoldmountingstrap.
Fromthepartsbagremovethemountingstrapassembly.
MountingStrap(B)containsseveralpairsofthreadedholes.
Findthepairofholesthatmatchesthespacingoftheholesin
canopy(G).Threadtwoofmountingscrews(C)intomounting
strap(B).Whenplacedoverthemountingstrap,thethreaded
endsofmountingscrews(C)willprotrudethroughtheholesof
canopy(G).Placemountingstrap(B)overthejunctionboxsothat
mountingscrews(C)arevertical.Attachmountingstrap(B)tothe
junctionboxusingtwoofmountingscrews(A).Tightenthescrews
securely.
ASSEMBLING THE FIXTURE
Bymeasuringdeterminecorrectnumberofrodsneededfor
properhangingheight.*Thisxtureincludes4rods(6”,12”,12”,
12”).Toshortenthexture,slidetheexcessrodsoffthewires.To
lengthen,addadditionalrodstothewires.Pullthexture’swires
throughrods(H,I,J,K)untiltautandthreadtherodstogether.
Thenthreadthebottomrodontothethreadsofxturebody(L).
Threadthetoprodtothethreadsoftheswiveljointoncanopy(G).
CONNECTING THE WIRES
Haveanassistantsupportthextureweightwhilecompletingthe
wiring.Cutawayexcesswires.Threadthexture’swiresthrough
canopy(G).Attachthexture’swirestothepowersupplywires
fromthejunctionbox.Connectblacktoblack(orsmooth);white
towhite(orribbed);groundtoground(greenorcopper).Twistthe
endsofthewirepairstogether.Thentwistonawireconnector.
Makesurealltwistsareinthesamedirection.Ifthereisnoground
wire(greenorcopper)fromthejunctionbox,locatetheground
screwonmountingstrap(B)andwrapthexture’sgroundwire
aroundthegreengroundscrew.Useascrewdrivertosecurethe
groundscrewontomountingstrap(B).Tuckallwiresneatlyinto
thejunctionbox.
FINISHING THE INSTALLATION
Pushcanopy(G)uptotheceilingandovermountingstrap(B)so
thatmountingscrews(C)protrudethroughcanopy(G).Twistdeco
nuts(F)ontothethreadsofmountingscrews(C)tosecurethe
canopyinplace.Holdshade(M)uptoxturebody(Y)andslide
spacer(Q)ontothesocket.Secureinplacebythreadingsocket
ring(R)ontothesocketuntiltight.
Your installation is now complete. Turn on the power and test the
xture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, contact
the place of purchase to arrange
for replacement parts.
B
A
C
D
E
G
F
H
I
J
L
K
O
N
M