Page is loading ...
1
2x ZX1TC 2x Isuzu Adapter 2x Tweeter Filter 2x Tweeter Brackets
ZDSKI1
2x ZX65C 2x Midbass Filter
Installation Tools Required
2
PH2 Screwdriver Tin Snip Plastic Pry Tool
Vehicle used for installation:*
Isuzu D-Max 2019 -> (RG01)
*Some differences may occur between different car and
year models.
ZDSKI1 Installation 1
Tools required:
3
1. Pull up the tweeter panel 2. Unscrew the two screws (PH2)
3. Disconnect the tweeter connector 4. Cut the tweeter mounting plate
1x PH2 Screwdriver 1x Tin Snip
ZDSKI1 Installation 2
Tools required:
4
5. Place the plate on the tweeter 6. Lock the plate by turning it
7. Connect the speaker connector 8. Screw the tweeter into place (PH2)
1x PH2 Screwdriver
ZDSKI1 Installation 3
Tools required:
5
9. Put back the tweeter panel 10. Repeat on the other side
11. Door panel removal 12. Remove the door handle panel
1x Plastic Pry Tool
ZDSKI1 Installation 4
Tools required:
6
13. Remove the armrest 14. Unscrew the screw
15. Remove the window switch panel 16. Remove the connectors
1x PH2 Screwdriver 1x Plastic Pry Tool
ZDSKI1 Installation 5
Tools required:
7
17. Unscrew the screw 18. Unscrew and remove window panel
19. Unscrew the screw 20. Remove the door panel
1x PH2 Screwdriver 1x Plastic Pry Tool
ZDSKI1 Installation 6
Tools required:
8
21. Remove door opener cables 22. Set the door panel aside
23. Unscrew the OEM speaker 24. Screw the speaker adapter
1x PH2 Screwdriver
ZDSKI1 Installation 7
Tools required:
9
25. Connect the speaker connector 26. Cable tie the cables together
27. Screw the speaker into the adapter 28. Reassemble the door in reverse order
1x PH2 Screwdriver
10
On Behalf of the Phoenix Gold team,
Thank you for choosing us!
Your installation is complete and we hope that your new
upgraded system will bring you joy and happiness for many
years to come when listening to your favorite music. As
always, our goal is bringing you The Gold Standard in Sound.
www.phoenixgold-eu.com
/
