Metz 32MTB2000Z Operating instructions

I have analyzed the provided document, which gives detailed disassembly instructions for the METZ TV 32MTB2000Z. The document outlines steps for safely removing the rear panel and circuit boards. It also emphasizes safety precautions, including pulling out the mains plug and being aware of residual charges. Feel free to ask me any questions about this device.
What tool is required for disassembly?

What should I do before removing the rear panel?

What should I be aware of when disassembling the printed circuit boards?

Metz Consumer Electronics GmbH

Ohmstrasse 55 - 90513 Zirndorf

Tel. (0911) 9706-0 - [email protected]

Demontageanleitung

Disassembly instructions

Metz 32MTB2000Z

Technische Änderungen und Irrtümer vorbehalten!

Technical changes and errors excepted!

U2199_40229_00

Notwendige Werkzeuge:

Nessesary tools:

Schraubendreher PH2

Screw driver PH2

1 Demontage der Rückwand

a) Schrauben mit einem

Schraubendreher PH2 entfernen.

b) Laschen leicht aufbiegen und

Rückwand gleichzeitig anheben.

1 Disassembly the rear panel

a) Remove screws with a screw driver

PH2.

b) Slightly bend open the tabs and lift

the rear wall at the same time.

2 Demontage der Leiterplatten

Elkos können Restladung

enthalten.

Elkos may contain residual

charges.

Schrauben mit einem Schraubendreher

PH2 entfernen.

2 Disassembly of the printed

circuit boards

Remove screws with a screw driver

PH2.

Vor Entfernen der Rückwand

Netzstecker ziehen.

Pull out the mains plug before

removing the rear panel.

PH2

PH2PH2

PH2