ZDST6CX

Phoenix Gold ZDST6CX Installation guide

  • Hello! I have reviewed the user manual for the Phoenix Gold ZD series ZDST6CX speaker installation. The document provides a detailed guide on how to install these speakers in a Toyota Auris 2014, including required tools and step-by-step instructions. I'm ready to answer any questions you might have about the installation process or the device itself.
  • What tools are needed for the installation?
    What car model is this installation manual for?
    What is the sequence of installation?
1
ZDST6CX
Installation Tools Required
2
PH2 Screwdriver Drill Plastic Pry Tool
Vehicle used for installation:*
Toyota Auris 2014 (E180)
Basic Sound System
*Some differences may occur between different car and
year models.
Rivet Tool 6x Rivets (4.8mm)
ZDST6CX Installation 1
Tools required:
3
1. Rear door removal 2. Remove the armrest
3. Unscrew the screw 4. Remove the windows switch panel
1x PH2 Screwdriver 1x Plastic Pry Tool
ZDST6CX Installation 2
Tools required:
4
5. Disconnect the connector 6. Unscrew the hidden screw
7. Remove the door panel (pull) 8. Lift the door panel up
1x PH2 Screwdriver 1x Plastic Pry Tool
ZDST6CX Installation 3
Tools required:
5
9. Remove the door opener cables 10. Drill out the OEM speaker
11. Install the Phoenix Gold speaker 12. Reassemble the door in reverse
1x Drill 5mm 1x Rivet Tool 6x Rivets (4.8mm)
6
On Behalf of the Phoenix Gold team,
Thank you for choosing us!
Your installation is complete and we hope that your new
upgraded system will bring you joy and happiness for many
years to come when listening to your favorite music. As
always, our goal is bringing you The Gold Standard in Sound.
www.phoenixgold-eu.com
/