Phoenix Gold ZDST6CS User manual

Type
User manual
1
ZDST6CS
Installation Tools Required
2
PH2 Screwdriver 5mm Drill Plastic Pry Tool
Vehicle used for installation:*
Toyota Auris 2014 (E180)
Basic Sound System
*Some differences may occur between different car and
year models.
Rivet Tool 6x Rivets (4.8mm)
ZDST6CS Installation 1
Tools required:
3
1. Front door removal 2. Pull out the tweeter pod towards you
3. Remove the plastic screw cover 4. Unscrew the hidden screw
1x PH2 Screwdriver 1x Plastic Pry Tool
ZDST6CS Installation 2
Tools required:
4
5. Remove the handle cover 6. Unscrew the two screws
7. Close-up of the screw 8. Remove the window switch panel
1x PH2 Screwdriver 1x Plastic Pry Tool
ZDST6CS Installation 3
Tools required:
5
9. Disconnect the connector 10. Remove the door panel (pull)
11. Lift the door panel up 12. Remove the door opener cables
1x Plastic Pry Tool
ZDST6CS Installation 4
Tools required:
6
13. Drill out the OEM speaker 14. Install the Phoenix Gold woofer
15. Take out the OEM tweeter 16. Pull it up
1x Drill 5mm 1x Rivet Tool 6x Rivets (4.8mm)
ZDST6CS Installation 5
Tools required:
7
17. Tweeter removed 18. Install the Phoenix Gold tweeter
19. Reassemble the door in reverse 20. Installation is now complete
8
On Behalf of the Phoenix Gold team,
Thank you for choosing us!
Your installation is complete and we hope that your new
upgraded system will bring you joy and happiness for many
years to come when listening to your favorite music. As
always, our goal is bringing you The Gold Standard in Sound.
www.phoenixgold-eu.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Phoenix Gold ZDST6CS User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI