2. SDC
  3. LRFA1R
LRFA1R

SDC LRFA1R User manual

  • Hello! I've reviewed the provided installation instructions for the SDC FALCON (DOR-O-MATIC) REX Switch Kit models 1690 & 1790. This document covers how to attach the switch assembly to the ELR unit and provides wiring specifications, including color codes for COM, N/C and N/O connections. I am ready to assist with your questions regarding its installation.
  • What does 'COM' stand for in the wiring specification?
    What does 'N/C' stand for in the wiring specification?
    What does 'N/O' stand for in the wiring specification?
    What is the voltage and current rating for the switch?
LRFA1R
FALCON (DOR-O-MATIC) REX SWITCH KIT
MODELS: 1690 & 1790
P:\INST INSTRUCTIONS\ELR KITS\INST-LRFA1R REV A 07-22 Page 1
Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email engineer@sdcsecurity.com
Attach the switch assembly to the ELR unit with the supplied screws as shown.
Route wires through the cable tie, along the side of the ELR and out.
SECURITY DOOR CONTROLS ■ WWW.SDCSECURITY.COM
[t] 800.413.8783 ■ 805.494.0622 ■ E-mail: [email protected] ■ 801 Avenida Acaso, Camarillo, CA 93012 ■ PO Box 3670, Camarillo, CA 93011
INSTALLATION INSTRUCTIONS
WHT
YEL
ORG
=
=
=
COM
N/C
N/O
5AMP @ 125VAC
RESISTIVE
WIRING SPECIFICATION
/