ITC 69641 User manual

Type
User manual
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
Safety Instructions
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Do not install any luminaire assembly closer than 6” from any combustible materials.
• Positive (+) outputs require a fuse if the attached wire leads are not rated to handle the max current.
• All electrical connections should be made inside a watertight junction box.
PARTS / TOOLS NEEDED:
Vertical Nav Light Power Drill Butt Splices (not provided)
INSTALLATION INSTRUCTIONS
Vertical Nav Light
Part#: 69641
For warranty information please visit www.itc-us.com/warranty-return-policy
Rev A • 11/02/22
Page 1 of 1
1. Remove bezel if not already disassembled.
2. Determine the installation location for your light. Once determined drill a 0.5” hole.
3. Connect wires to power source.
4. Feed wires back through the hole and screw the light in place using the screws provided.
5. Reattach bezel.
  • Page 1 1

ITC 69641 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI