3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
1. Determine your installation location and mark the location
using the provided template. Once marked cut out the hole.
Safety Instructions
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Do not install any luminaire assembly closer than 6” from any combustible materials.
PARTS/TOOLS NEEDED:
Navigation Light Stainless Steel Screws
(not provided) Power Drill Electric Jigsaw
2. Insert the light into the hole and screw in using stainless steel
screws.
3. Attach the male connector on the light (Delphi - 12010973)
with the female connector (Delphi - 12015792)on the boat or
follow the wiring diagram below.
4. Cut out the template below to use as a guide for your hole.
To 12V DC
Power
Red (+)
Black (-)
Load (+) Neutral (-)
INSTALLATION INSTRUCTIONS
Flip Nav Light
Part#: 69636SS
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #: 710-00022 • Rev B • 12/14/17
Page 1 of 1
-
1
ITC 69636HSS User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ITC elio 21055 User manual
-
Vivo BEE-V002E Assembly Instructions
-
-
American Standard 12SB.301800.290 Installation guide
-
-
-
-
-
-
