Mounting Guide 3
DB 1100/1400/1450 – EC 1400/1450 wall fan
1 Wall mounting
Center the wall fan in the hole, use wedges.
The wall fan must be in level.
The cable must be lead into the house.
At the bottom, the fan should go approx. 15 mm into
the house, so that the wall fan slopes enough for
water to run out of the fan.
Mounting in sandwich walls
Mount the wall fan by means of angle brackets on
the outside. (Angle brackets are not supplied).
Apply a silicone sealing at the angle bracket, as
shown in the drawing.
Seal the fan inside the house.