Peerless DS-VWC555-3X2 Product information

Category
Flat panel floor stands
Type
Product information
1
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
Installation and Assembly: 3 x 2 Cart
Model: DS-VWC555-3x2
Maximum Load Capacity 650lbs (295kg)
1. All dimensions:
Font = Arial Regular 8 pt
mm color = black
inch color = Pantone 201C (SMYK)
2. Captions:
Font = Century Gothic/Bold 10 pt
Color = black
1. All dimensions:
Font = Arial Regular 4.8 pt
Color = black
2. Captions:
Font = Century Gothic/Bold 6 pt
Color = black
3. Sub-captions:
Font = Century Gothic/Bold 4.8 pt
Color = black
4. Line drawings:
Color = black
Line weight = from .5 to 1 pt (visual call depending on
drawing)
All arrows must be the same style
3. Sub-captions:
Font = Century Gothic/Bold 8 pt
Color = black
4. Line drawings:
Color = black
Line weight = from .5 to 1 pt (visual call depending on drawing)
All arrows must be the same style
A R C H I T E C T S S P E C I F I C A T I O N S
CATALOG LINE DRAWING TEMPLATE
PRODUCT DATA SHEET TEMPLATE
W: 7.8883" x H: 4.3737"
W: 4.7431" x H: 2.6944"
Model: DS-VWC555-3X2
The Video Wall Cart shall be a Peerless model DS-VWC555-3X2 and shall be located where indicated on the plans. Assembly
and installation shall be done according to instructions provided by the manufacturer.
119.21"
(3028mm)
114.66"
(2912mm)
99.52"
(2528mm)
31.94"
(811mm)
39.28"
(998mm)
12.14"
(308mm)
FRONT VIEW SIDE VIEW
COMPATIBILITY FORMULA
ADAPTER BRACKET
SIDE VIEW
± 0.63” (16mm)
Height and Depth
Adjustment
5.91"
(150mm)
7.87"
(200mm)
11.81"
ADAPTER
PLP
PLATE
(300mm)
13.78"
(350mm)
15.75"
(400mm)
0.63"
(16mm)
0.63"
(16mm)
Display width must be 39.75”
Display height must be no < 31.94”
Two display widths + hole pattern width must be <114.65”
119.21"
(3028mm)
114.66"
(2912mm)
99.52"
(2528mm)
31.94"
(811mm)
39.28"
(998mm)
12.14"
(308mm)
FRONT VIEW SIDE VIEW
COMPATIBILITY FORMULA
ADAPTER BRACKET
SIDE VIEW
± 0.63” (16mm)
Height and Depth
Adjustment
5.91"
(150mm)
7.87"
(200mm)
11.81"
ADAPTER
PLP
PLATE
(300mm)
13.78"
(350mm)
15.75"
(400mm)
0.63"
(16mm)
0.63"
(16mm)
Display width must be 39.75”
Display height must be no < 31.94”
Two display widths + hole pattern width must be <114.65”
2
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
Parts List: 202-1526 (FINAL ASSEMBLY)
Part Description Quantity Part Number
A vertical support 2 145-1543
B adapter brackets 12 145-1711
C horizontal support 3 145-1382
D shelf 1 145-1361
E 5” caster 4 600-0026
F 1/4” at washer 48 540-9440
G M8 x 25mm phillips screw 16 520-1031
H 5/16 at washer 16 540-9406
I 5/16 split washer 16 540-9405
J 1/4-20 x 3.5” hex head screw 48 520-1656
K 1/4-20 nylock nut 48 530-9413
L .38 OD x .06 LG nylon washer 24 590-2233
M 18” mesh sleeve 6 600-1014
N M8 x 16mm phillips screw 24 520-9257
O M6 x 12mm phillips screw 24 520-1128
P 4mm allen wrench 6 560-9646
Q cable tie 12 560-9711
R tube cap 2 590-1289
S M5 x 10mm socket pin screw (not used) 12 520-1164
T #14 fender washer (not used) 24 540-1008
U lower front cover 1 145-1505
V lower back cover 1 145-1384
W upper cover 2 145-1754
X rail connection bracket 4 145-1503
Y horizontal rail 4 145-1447
Z side cover 2 145-1362
AA M5 x 10mm phillips screw 24 520-1233
BB at washer 24 540-9400
CC lock washer 24 540-1035
DD decorative screw 12 520-2326
EE spacer 4 590-1136
FF self-drilling screw 3 520-1320
GG connection bracket 2 145-1504
HH M6 x 16mm phillips screw 36 520-9274
Before beginning, make sure you have all parts shown
3
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
BA
F
E
DC
G
J
IH
K
L M
N O P
Q
R
T
S
4
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
U
V
W
Y
Z
AA BB CC
DD EE FF
X
GG
5
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
Assembling Cart
1
Attach two horizontal supports (C) to vertical support (A) using eight 1/4-20 x 3.5" hex head screws (J),
1/4" SAE washers (F) and 1/4-20 nylock nuts (K).
2
Attach horizontal supports (C) to second
vertical support (A) using eight 1/4-20 x 3.5" hex
head screws (J), 1/4" SAE washers (F) and 1/4-20
nylock nuts (K).
3
Attach horizontal support (C) to vertical supports (A)
using eight 1/4-20 x 3.5" hex head screws (J),
1/4" SAE washers (F) and 1/4-20 nylock nuts (K).
A
C
J
F
K
A
C
J
F
K
A
C
J
F
K
A
6
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
4
Attach four swivel casters (E) to vertical supports (A) using sixteen M8 x 25 mm pan phillips screws (G),
split washers (I) and 5/16" SAE at washers (H).
G
I
H
A
E
5
Attach two rail brackets (Y) together using two rail connection brackets (X) with eight M5 x 10 mm pan phillips
screws (AA), lock washers (CC), and at washers (BB).
X
Y
AA
BB
CC
7
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
X
X = HEIGHT OF DISPLAY
A
DISPLAY HEIGHT
DISTANCE
EQUALS
DISPLAY
HEIGHT
1. Locate the position of the lower horizontal rail assemblies and attach to vertical supports (A).
2. Use display height to determine location of upper horizontal rail assemblies,
NOTE: Horizontal rail assemblies must be secured using sixteen 1/4-20 x 3.5" hex head screws (J).
Determine position of horizontal rails assemblies using the formula below.
6
UPPER HORIZONTAL RAIL
LOWER HORIZONTAL RAIL
HORIZONTAL RAIL ASSEMBLY
8
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
7
Attach two horizontal rails assemblies onto vertical supports (A) using 16 1/4-20 x 3.5" hex head screws (J), 1/4"
SAE washers (F) and 1/4-20 nylock nuts (K) as shown in detail 2. Make sure that horizontal rail
assemblies are level then tighten all 1/4-20 x 3.5" hex head screws (J). Place two tube caps (R) into tops of vertical
supports (A) as shown in detail 2.
A
F
K
J
Y
A
J
J
DETAIL 2
R
CABLE MANAGEMENT
8
NOTE: Display cables can be covered using
18" mesh sleeve (M) before securing.
Display cables can be secured to horizontal
rails assemblies using cable ties (Q) as needed
through slots in horizontal rails (Y).
Q
M
Y
A
Y
SLOT
9
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
9
NOTE: Connection brackets (GG) orientation.
Place connection brackets (GG) onto rail connection brackets (X) as shown below.
GG
FRONT OF DISPLAY CART
FRONT OF DISPLAY CART
RIGHT SIDE
LEFT SIDE
X
X
GG
10
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
FRONT
BACK
AA
CC
BB
GG
X
Attach connection brackets (GG) onto rail connection brackets (X) as shown below.
Secure one connection brackets (GG) with four M5 x 10 mm phillips screws (AA), lock washers (CC), and
at washers (BB) as shown below. Repeat step for remaining connection bracket (GG).
9-1
11
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
Hook display and adapter brackets (B) onto horizontal rail assemblies as shown below.
NOTE: Start with bottom display.
NOTE: Once display is located in desired position, tighten security screws as shown in detail 4.
10
Attach adapter brackets (B) to back of display using four M6 x 12 mm phillips screws (O) or M6 x 16 mm Phillips
screw (HH) with nylon shoulder washer (L), or four M8 x 15 mm phillips screws (N) as shown below.
DISPLAY
B
N or O,HH
L
Adapter Bracket Mounting Patterns
B
11
DETAIL 4
DISPLAY NOT SHOWN FOR CLARITY
TIGHTEN
SECURITY
SCREW
400 mm
200 mm MIN
600 mm MAX
300 mm
200 mm
D
B
PLP PLATE
12
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
Fasten shelf (D) onto horizontal support (C) using three self-drilling screws (FF) as shown below.
12
D
FF
C
13
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
13
Use legend below to determine position of display.
NOTE: Each knob can be adjusted independently for ne tuning angle adjustments.
Turn knobs CLOCKWISE to raise display height. Turn knobs CLOCKWISE to push out display.
Turn knobs COUNTER-CLOCKWISE to lower display height. Turn knob COUNTER-CLOCKWISE to pull in display.
UP DOWN IN OUT
KNOB
Adapter Bracket Adjustment
14
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
BACK VIEW
U
W
V
W
DD
NOTE: Position bottom front and back covers rst
Position front bottom cover (U). Secure covers in place using four decorative screws (DD) as shown below.
Position back bottom cover (V). Secure covers in place using four decorative screws (DD) as shown below.
Position upper covers (W) on front and back of vertical supports (A). Secure upper covers at top (W) with
two 1/4-20 x 3.5” hex head screws (J), two 1/4” at washer (F), and two 1/4-20 nylock nuts (K).
Secure base of covers in place using two decorative screws (DD) as shown below.
14
Attaching Covers
J
F K
15
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
Attach two retaining spacers (EE), and decorative screws (DD) to side
cover (Z) as shown to right. Attach side cover to vertical support (A) so
that it goes inside the lower front and back covers (U and V).
15
Z
A
EE
DD
16
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
Peerless-AV
2300 White Oak Circle
Aurora, IL 60502
Ph: (800) 865-2112
Fax: (800) 359-6500
www.peerless-av.com
© 2013, Peerless Industries, Inc.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Peerless DS-VWC555-3X2 Product information

Category
Flat panel floor stands
Type
Product information

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI