SICK TDC-M100 Operating instructions

OPERATING INSTRUCTIONS

TELEMATIC DATA COLLECTOR

Gateway systems

2

8021804/2017-11-27|SICK

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Subject to change without notice

Product described

Product name: Telematic Data Collector

Document identification

Title: Telematic Data Collector operating instructions

Part number: 8021804

Status: 2017-11-27

Manufacturer

SICK AG

Erwin-Sick-Str. 1 · 79183 Waldkirch · Germany

Trademarks

IBM is a trademark of the International Business Machine Corporation.

MS-DOS is a trademark of the Microsoft Corporation.

Windows is a trademark of the Microsoft Corporation.

Other product names in this document may also be trademarks and are

only used here for identification purposes.

Original documents

The German version 8021803 of this document is an original document of

SICK AG.

SICK AG does not assume liability for the correctness of a non-authorized

translation.

In case of doubt, contact SICK AG or your local dealer.

Legal notes

Subject to change without notice

ABOUT THESE OPERATING INSTRUCTIONS 1

3

8021804/2017-11-27|SICK

Subject to change without notice

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Contents

1 About these operating instructions ................................................................................ 6

1.1 Described software versions ............................................................................... 6

1.2 Purpose of this document .................................................................................... 6

1.3 Target group ......................................................................................................... 6

1.4 Information depth ................................................................................................ 7

1.5 Abbreviations used............................................................................................... 7

1.6 Symbols used ....................................................................................................... 8

2 Safety ................................................................................................................................. 9

2.1 Qualified personnel .............................................................................................. 9

2.2 Applications of the system ................................................................................... 9

2.3 Intended use ......................................................................................................... 9

2.4 General safety notes and protective measures .............................................. 10

2.4.1 Safety notes and symbols ................................................................. 10

2.4.2 General safety notes .......................................................................... 11

2.4.3 Potential sources of danger .............................................................. 12

2.5 Protecting the environment .............................................................................. 13

3 System description ........................................................................................................ 14

3.1 Scope of delivery ............................................................................................... 14

3.2 System components.......................................................................................... 18

3.2.1 TDC devices – collecting and transmitting sensor data .................. 18

3.2.1.1 The TDC device as a receiver ........................................... 18

3.2.1.2 The TDC device as a sender ............................................. 19

3.2.2 Processing and visualizing sensor data on the SICK online

portal ................................................................................................... 21

3.2.2.1 Components of the SICK online portal ............................. 21

3.2.2.2 Multi-client capability and access rights .......................... 21

3.2.2.3 Visualization and monitoring ............................................ 22

3.3 Interfaces for integration into customer applications ..................................... 23

3.4 Status indicators for the TDC devices .............................................................. 25

3.4.1 TDC-B100/TDC-B200 ........................................................................ 25

3.4.2 TDC-M100 .......................................................................................... 26

4 Mounting ........................................................................................................................ 27

4.1 Inserting the SIM card (not EU countries or for MQTT operation) .................. 27

4.2 Mounting the TDC-B100/200 .......................................................................... 30

4.3 Mounting the TDC-M100 .................................................................................. 30

5 Electrical installation .................................................................................................... 31

5.1 Connecting TDC devices ................................................................................... 31

5.1.1 Connectors on the TDC devices ........................................................ 31

5.1.2 Connecting the TDC device to the voltage supply ............................ 32

5.1.3 Connecting the TDC device to the ignition system ........................... 34

5.1.4 Connecting the TDC device to SICK sensors .................................... 35

5.1.5 Connecting fuel level sensors ........................................................... 38

5.2 Screwing on the GSM antenna ......................................................................... 39

5.3 Connecting the GPS antenna ........................................................................... 39

6 Commissioning .............................................................................................................. 40

6.1 Launching the TDC devices .............................................................................. 40

6.2 Preparing the configuration PC ........................................................................ 40

1 ABOUT THESE OPERATING INSTRUCTIONS

4

8021804/2017-11-27|SICK

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Subject to change without notice

6.3 General notes .....................................................................................................40

6.3.1 Establishing a connection with the configuration PC .......................41

6.3.2 Installing TDC Configurator ................................................................42

6.4 Connecting to the TDC device ...........................................................................43

6.4.1 Launching the configuration software ...............................................43

6.4.2 Establishing a connection to the TDC device ....................................44

6.5 Adjusting the standard parameters and configuring the interfaces ...............46

6.5.1 General settings ..................................................................................46

6.5.1.1 General ...............................................................................46

6.5.1.2 GPRS connection data .......................................................48

6.5.1.3 Tracking ..............................................................................51

6.5.2 Configuring the interfaces ..................................................................53

6.5.2.1 What are telemetry elements? ..........................................53

6.5.2.2 Configuring a telemetry element for a digital signal ........55

6.5.2.3 Copying a telemetry element.............................................60

6.5.2.4 Configuring a telemetry element for a motor signal ........61

6.5.2.5 Configuring a telemetry element for a fuel level sensor ..62

6.5.3 Configuring the internal sensors ........................................................63

6.5.4 Transferring the configuration to the TDC device .............................64

6.5.5 Saving the configuration on the PC ...................................................64

6.5.6 Recording ............................................................................................64

6.5.7 Displaying system information ...........................................................65

7 Monitoring .......................................................................................................................66

7.1 Setting up a customer account for the SICK online portal ..............................66

7.1.1 Applying for a customer account .......................................................66

7.1.2 Notification about your customer account ........................................70

7.2 Configuring the TDC Management System.......................................................71

7.2.1 Logging in to the TDC Management System .....................................71

7.2.2 Registering additional TDC devices ...................................................72

7.2.3 Configuring a dashboard ....................................................................73

7.2.3.1 Creating a dashboard ........................................................73

7.2.3.2 Defining the structure for displaying telemetry

elements on the dashboard ..............................................74

7.2.4 Visualizing key figures using widgets on the dashboard ..................76

7.2.4.1 Adding key figures for sensor data ...................................76

7.2.4.2 Adding key figures for alarms ............................................78

7.2.4.3 Adding diagrams ................................................................79

7.2.5 Analyzing sensor data in detail ..........................................................81

7.2.6 Administering the management platform .........................................82

7.3 Working with fleet management .......................................................................83

7.3.1 Position display ...................................................................................83

7.3.2 Displaying the vehicle list with detailed information ........................84

7.3.3 Displaying current vehicle fuel levels ................................................84

7.3.4 Accessing information about a specific vehicle ................................85

7.3.5 Accessing fuel consumption information ..........................................88

7.3.6 Analyzing the kilometers covered ......................................................90

7.4 Transferring data to a customer application using an API interface ..............92

7.4.1 Input parameter ..................................................................................92

7.4.2 Example for API call ............................................................................93

7.5 Accessing data from the TDC device via the MQTT interface ..........................94

7.5.1 Description of the MQTT interface structure .....................................94

7.5.2 Description of the MQTT protocol ......................................................95

ABOUT THESE OPERATING INSTRUCTIONS 1

5

8021804/2017-11-27|SICK

Subject to change without notice

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

8 Maintenance .................................................................................................................. 97

8.1 Maintenance during operation ......................................................................... 97

8.1.1 Visual inspection ................................................................................ 97

8.1.2 Cleaning .............................................................................................. 98

8.2 Replacing components ................................................................................... 100

8.2.1 Basic procedure ............................................................................... 100

8.2.2 Replacing the GPS antenna ............................................................ 100

8.2.3 Replacing the TDC device overcurrent protection device .............. 101

8.2.4 Replacing the TDC device ................................................................ 102

9 Annex ............................................................................................................................ 103

9.1 Technical data ................................................................................................. 103

9.1.1 TDC-B100 data sheet ...................................................................... 103

9.1.2 TDC-B200 data sheet ...................................................................... 105

9.1.3 TDC-M100 data sheet ..................................................................... 108

9.2 Dimensional drawings ..................................................................................... 110

9.2.1 TDC-B100 dimensional drawing...................................................... 110

9.2.2 TDC-B200 dimensional drawing...................................................... 110

9.2.3 TDC-M100 dimensional drawing ..................................................... 110

10 Figures and tables ....................................................................................................... 111

10.1 List of tables .................................................................................................... 111

10.2 List of figures ................................................................................................... 112

1 ABOUT THESE OPERATING INSTRUCTIONS

6

8021804/2017-11-27|SICK

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Subject to change without notice

1 About these operating instructions

Please read this chapter carefully before you begin working with this documentation and

the Telematic Data Collector (TDC for short) gateway system.

1.1 Described software versions

Software

Function

Status

TDC Configurator

Configuring the TDC devices

≥ V 1.0-0-0

Tab. 1: Software versions

1.2 Purpose of this document

These operating instructions are designed to give technical personnel instructions on

the safe mounting, configuration, electrical installation, commissioning, operation, and

maintenance of the gateway system as well as on the connection and configuration of

the sensors.

These operating instructions do not provide information on operating vehicles or

machines into which the individual devices of the gateway system have been or are going

to be integrated. Additional information on this can be found in the customer

documentation.

1.3 Target group

These operating instructions are intended for people integrating the devices of the

gateway system into a vehicle or machine and performing initial commissioning,

operation, and maintenance.

They are also intended for the planners and integrators of the customer system, as well

as the operating entity with responsibility for it.

Target group

Tasks

Entity operating the customer system

System user

Operating the system:

 The system user reports faults to the system manager.

System manager

Mounting, electrical installation, maintenance, and replacement

of system components:

 The system manager submits support requests to SICK.

SICK

SICK service technician

Commissioning, configuration, and support.

Tab. 2: Target group

ABOUT THESE OPERATING INSTRUCTIONS 1

7

8021804/2017-11-27|SICK

Subject to change without notice

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

1.4 Information depth

These operating instructions contain information about the following topics related to the

profiling system:

• System description

• Mounting

• Electrical installation

• Commissioning

• Operation

• Maintenance and care

• Fault diagnosis and troubleshooting

• Technical data and dimensional drawings

When planning and using the gateway system, technical skills are also required that are

not covered by this document.

The official and legal regulations for operating the system must always be complied with.

Further information about the device components used in the gateway system can be

found in the respective operating instructions.

1.5 Abbreviations used

Application programming interface

Access point name = access point of the network operator in the GPRS data network

Controller area network = serial bus system

Global system for mobile communications = technical wireless standard for digital

wireless telephony

General packet radio service = the name given to the packet-based service for

transmitting data within GSM networks

Global positioning system = global satellite navigation system for position determination

Message queue telemetry transport = open messaging protocol for transmitting telemetry

data between devices in the form of messages

Subscriber identity module = chip card for cell phones

Telematic Data Collector = system used to collect and transmit telemetry data

Note

API

APN

CAN bus

GSM

GPRS

GPS

MQTT

SIM

TDC

1 ABOUT THESE OPERATING INSTRUCTIONS

8

8021804/2017-11-27|SICK

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Subject to change without notice

1.6 Symbols used

Recommendations are designed to assist you in the decision-making process with respect

to the use of a certain function or technical measure.

Notes provide information about the features of a device, application tips, or other useful

information.

Instructions that must be carried out in the described order are referred to as step-by-step

instructions and are indicated by numbered lists. Carefully read and follow the

instructions for taking action.

Instructions for taking action are indicated by an arrow. Carefully read and follow the

instructions for taking action.

Recommendation

Note

1. / 2. ...

Step by step



Action

SAFETY 2

9

8021804/2017-11-27|SICK

Subject to change without notice

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

2 Safety

This chapter concerns your own safety and the safety of the system operator.

▸

Please read this chapter carefully before you begin working with the gateway system.

2.1 Qualified personnel

The gateway system must only be commissioned and maintained by properly qualified

personnel.

A qualified person

• has sufficient skills in the field of the respective equipment based on their technical

training and experience and

• has been instructed by the manufacturer in system operation and all applicable safety

guidelines and

• is familiar with all relevant country-specific occupational safety regulations, work safety

regulations, guidelines, and generally accepted technical rules and standards

(e.g., DIN standards, VDE regulations, country-specific rules) to such an extent that

they are able to evaluate the safe condition of the power-driven machinery, and

• has access to and has read the operating instructions.

2.2 Applications of the system

The Telematic Data Collector (TDC) gateway system is a system used to receive and

transmit telemetry data on a cloud server. It is, for example, ideal for sensor-controlled

monitoring tasks, vehicle tracking, working hours management, and access control as

well as for remote measurement.

The gateway system uses one or more TDC devices to collect data. The TDC devices

feature all of the standard interfaces that are required to integrate sensors and other

devices.

The sensor data received is transmitted to the cloud via the mobile network through either

the SICK online portal or a customer server.

The SICK online portal is a platform that can be used to visualize sensor data on a web-

based user interface, allowing for convenient monitoring.

The TDC gateway system also supports the integration of recorded sensor data into all

leading business applications. Integration is an option when using either the SICK online

portal or a cloud-based customer server via an API included as part of the scope of

delivery or via the MQTT protocol in a defined topic structure.

2.3 Intended use

The gateway system may only be used by qualified personnel in the environment in which

it was mounted and initially commissioned by qualified personnel in accordance with

these operating instructions.

If used in any other way or if alterations are made to the gateway system – including

in the context of mounting and installation – this will render void any warranty claims

directed to SICK AG.

Note

2 SAFETY

10

8021804/2017-11-27|SICK

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Subject to change without notice

2.4 General safety notes and protective measures

2.4.1 Safety notes and symbols

The following safety and hazard notes concern your own safety, the safety of third parties,

and the safety of the devices. You must therefore observe these symbols at all times.

HAZARD

Denotes an immediate hazard that may result in severe to fatal injuries.

The symbol shown on the left-hand side of the note refers to the type of hazard in

question (the example here shows a risk of injury resulting from electrical current).

WARNING

Denotes a potentially dangerous situation that may result in severe to fatal injuries.

The symbol shown on the left-hand side of the note refers to the type of hazard in

question (the example here shows a risk of damage to the eye by laser beams).

WARNING

Denotes a potentially dangerous situation that may result in minor personal injury or

possible material damage.

NOTE

Denotes a potential risk of damage or functional impairment of the device or the devices

connected to it.

This symbol refers to supplementary technical documentation.

SAFETY 2

11

8021804/2017-11-27|SICK

Subject to change without notice

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

2.4.2 General safety notes

The gateway system has been designed such that it can be operated safely. Protective

devices reduce potential risks to the maximum possible extent. However, a certain level

of risk will always remain.

Awareness of potential sources of danger in the system will help you to work in a safer

manner and thus prevent accidents.

To avoid risks, please also observe the special warnings in each of the individual

chapters.

WARNING

Safety notes

Observe the following to ensure the safe use of the gateway system as intended.

• The notes in these operating instructions (e.g., regarding use, mounting, or installation)

must be observed.

• All official and statutory regulations governing the operation of the gateway system

must be complied with.

• National and international legal specifications apply to the installation and use of the

system, to its commissioning, and to recurring technical inspections, in particular:

- Work safety regulations and safety rules

- Any other relevant safety provisions

• All checks must be carried out by qualified personnel or specially authorized and

commissioned personnel, and must be recorded and documented to ensure that they

can be reconstructed and retraced at any time.

• These operating instructions must be made available to the operator of the system

in which the components of the gateway system are used.

• The operator of the gateway system must be instructed by qualified personnel and

must read the operating instructions.

2 SAFETY

12

8021804/2017-11-27|SICK

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Subject to change without notice

2.4.3 Potential sources of danger

Electrical current

HAZARD

Risk of injury and damage caused by electrical current

Improper handling of live devices may lead to severe personal injury or death by electric

shock.

▸

Electrical installation and maintenance work must only be carried out by personnel

authorized to do so.

▸

The power supply must be disconnected when attaching and detaching electrical

connections.

▸

Select and implement wire cross-sections and their correct fuse protection in accordance

with the applicable standards.

▸

Do not touch any live parts.

▸

In the event of danger, immediately disconnect the device from the grid.

▸

Always use original fuses with the specified current rating.

▸

Report any damaged cables to the maintenance team without delay.

▸

Observe the up-to-date safety regulations when working on electrical systems.

Commissioning/operation/maintenance

WARNING

Risk resulting from incorrect commissioning and configuration

Do not commission until a thorough check has been performed by qualified personnel.

Before carrying out initial commissioning of the devices of the gateway system, you must

have the system checked and approved by qualified personnel.

NOTE

Claims under the warranty rendered void

The housings of the devices must not be opened. The devices are sealed.

If the device is opened, any warranty claims against SICK AG will be void.

WARNING

Risk resulting from faults

Cease operation if the cause of the malfunction has not been clearly identified.

▸

Immediately deactivate the TDC device if you cannot clearly identify the fault and if you

cannot safely remedy the problem.

SAFETY 2

13

8021804/2017-11-27|SICK

Subject to change without notice

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

2.5 Protecting the environment

The components of the gateway system have been designed to minimize their impact on

the environment. They consume only little energy.

Always act in an environmentally responsible manner at work. For this reason, please note

the following information regarding disposal.

Disposal after final decommissioning

▸

Always dispose of unusable or irreparable devices in accordance with the applicable

waste disposal regulations specific to your country.

▸

Remove the plastic parts and recycle the aluminum housing of the TDC device.

▸

Dispose of all electronic assemblies as hazardous waste. The electronic assemblies are

easy to dismantle.

SICK AG does not take back devices that are unusable or irreparable.

Note

3 SYSTEM DESCRIPTION

14

8021804/2017-11-27|SICK

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Subject to change without notice

3 System description

This chapter describes the layout and operating principle of the gateway system, in

particular the interaction of the different components.

Always read this chapter before you mount, install, and commission the components of

the gateway system.

3.1 Scope of delivery

Depending on the installation conditions and number of interfaces required, the gateway

system uses the TDC-B100, TDC-B200 or TDC-M100 device variants. The different TDC

devices are suitable for different installation conditions and numbers of interfaces.

Fig. 1: TDC gateway system device variants

All TDC devices come with a GSM antenna, installed overcurrent protection device, and

SIM card inserted for operation in EU countries.

The scope of delivery for TDC devices in the B series also includes a GPS antenna, a

voltage supply cable, and cables for connecting sensors. Additional cables can be ordered

as accessories.

Fig. 2: TDC gateway system scope of delivery

Note

SYSTEM DESCRIPTION 3

15

8021804/2017-11-27|SICK

Subject to change without notice

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

A quick start guide is also included as part of the scope of delivery to provide assistance

at the initial commissioning stage. The quick start guide also includes a download link

for the operating instructions, system documentation, interface specifications, and TDC

Configurator configuration software.

Fig. 3: Quick start guide including download link for the documentation and configuration

software

NOTE

Basic inspection for completeness and damage

It is recommended that you carefully check for and report transport damage of any kind

as soon as possible after receiving the system.

Also verify that the delivery includes all components listed on the delivery note.

▸

Report any incomplete or damaged deliveries to Customer Service.

▸

Always document the damage by taking photographs.

Number

Part No.

Description

1 TDC gateway system consisting of:

n

6064656

 TDC-B100 with GSM antenna and installed overcurrent protection

device

 SIM card inserted for operation in EU countries

 Quick start guide including a download link for the operating

instructions, system documentation, interface specifications, and

TDC Configurator configuration software

n

6067023

 GPS antenna

n

6067024

 3-A back-up overcurrent protection device

n

6067018

1 cable set consisting of:

 Cable for the voltage supply and connection of a peripheral device

to two digital inputs (6-pin)

 RS485 connecting cable (4-pin)

and/or

n

6064657

 TDC-B200 with GSM antenna and installed overcurrent protection

device

 SIM card inserted for operation in EU countries

 Download link for the operating instructions, system

documentation, interface specifications, and TDC Configurator

configuration software

n

6067023

 GPS antenna

n

6067024

 3-A back-up overcurrent protection device

n

6067019

1 cable set consisting of:

 Cable for the voltage supply and connection of a peripheral device

to two digital inputs (6-pin)

 RS485 connecting cable (4-pin)

 INPUT cable (6-pin)

3 SYSTEM DESCRIPTION

16

8021804/2017-11-27|SICK

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Subject to change without notice

Number

Part No.

Description

and/or

n

6065413

 TDC-M100 with GSM antenna and installed overcurrent protection

device

 SIM card inserted for operation in EU countries

 Quick start guide including a download link for the operating

instructions, system documentation, interface specifications, and

TDC Configurator configuration software

n

6067024

 3-A back-up overcurrent protection device

Tab. 3: TDC gateway system scope of delivery

Configuration cables (optional)

There is an optional configuration cable available for all device types that can be used to

connect the TDC device to a configuration PC. The label on the packaging also includes

the link with the access data for the documentation and configuration software.

Fig. 4: Configuration cables (optional)

Part No.

Description

TDC-B100 / TDC-B200

6066259

Cable for connecting the TDC-B100 to a configuration PC, Micro-Fit USB

(6-pin)

Drivers are included in the configuration software

TDC-M100

6066258

Cable for connecting the TDC-M100 to a configuration PC, Micro-Fit USB

Drivers are included in the configuration software

Tab. 4: Configuration cables (optional) – part numbers

SYSTEM DESCRIPTION 3

17

8021804/2017-11-27|SICK

Subject to change without notice

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Additional cables (optional)

Preconfigured cables can be obtained for connecting sensors and devices to TDC devices

in the B series.

Part No.

Description

TDC-B100

6067018

1 cable set consisting of:

 TDC PWR+2IN – 90 cm, Micro-Fit 4-pin, open ends

 TDC RS485 – 30 cm, Micro-Fit 4-pin, open ends

(included in delivery)

6067022

1 cable set with 3 cables (UART/USB, CAN1, DIAG)

TDC-B200

1 cable set consisting of:

 TDC PWR+2IN – 90 cm, Micro-Fit 4-pin, open ends

 TDC RS485 – 30 cm, Micro-Fit 4-pin, open ends

 TDC INPUTS – 30 cm, Micro-Fit 6-pin, open ends

(included in delivery)

6066260

1 cable set with 9 cables (UART, CAN1, DIAG, RS-232, OUTPUTS,

1Wire, USB, CAN2, FULL RS-232)

Tab. 5: Additional connecting cables (optional) – part numbers

Fuel level sensor for TDC-B200 (optional)

A fuel level sensor manufactured by Omnicomm is available as an optional accessory for

the TDC-B200 device.

Fig. 5: Fuel level sensor (optional)

Part No.

Description

6066264

LLS30160-700mm-RS232/485 fuel level sensor with mounting kits,

connecting cable, and quick start guide.

Tab. 6: Fuel level sensor (optional) – part number

Spare parts

Part No.

Description

5337537

SIM card (for operation in EU countries)

6067024

MINI ATO overcurrent protection device, 32 V, 3 A, 0297003. L

5337536

EAD PST2100SMA RA GSM antenna, penta band

6067023

GPS antenna (only TDC-B100/TDC-B200)

Tab. 7: Spare parts – part numbers

3 SYSTEM DESCRIPTION

18

8021804/2017-11-27|SICK

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Subject to change without notice

3.2 System components

3.2.1 TDC devices – collecting and transmitting sensor data

The gateway system uses TDC devices to receive and transmit sensor data.

• As a receiver, the TDC device collects data from connected sensors and devices.

• As a sender, the TDC device transmits the sensor data received to the cloud via the

mobile network.

3.2.1.1 The TDC device as a receiver

A TDC device will generally receive sensor data from a vehicle or a machine. For this to

happen, the sensors are connected to the TDC device via appropriate interfaces.

The TDC device also has built-in sensors that are used to detect the movement of the

vehicle. This movement data can be output along with GPS data (this only applies to TDC

devices of the B series). A GPS antenna is included in the scope of delivery for these

devices.

Fig. 6: The TDC device as a sensor data receiver

Which sensors and devices can be integrated?

The TDC device features all of the standard interfaces that are required to integrate

sensors and other devices. Digital, analog, and CAN bus-based signals can be processed.

The interfaces are configured via the TDC Configurator configuration software included in

the scope of delivery.

Fig. 7: TDC device interfaces for the integration of sensors

SYSTEM DESCRIPTION 3

19

8021804/2017-11-27|SICK

Subject to change without notice

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

• SICK sensors of the TiM series detect the presence of an object within a specified area

(detection). They are ideally suited for monitoring the area around a vehicle, for

instance. If an object is detected in the monitored area, the result is output via the

digital output.

• Capacitive level sensors (such as those from the company Omnicomm) are used for

the level measurement of fuels and oils. When using a capacitive measuring method,

an insulated measurement electrode forms an electric capacitor with the medium

surrounding it. As the level and in turn the capacitance decreases, the latter is analyzed

by electronics and communicated by an electrical signal.

• Capacitive proximity sensors, such as SICK sensors of the CM series, can detect all

kinds of materials beyond a surface. This allows a minimum level to be detected, for

example.

• A TDC device can also process signals from other devices or motors. Vehicle activities

can be traced upon connection to the ignition system.

3.2.1.2 The TDC device as a sender

When using the SICK online platform, the TDC device transmits the sensor data received

to the SICK cloud server in real time. This happens automatically via the mobile network

using the SIM card inserted into the TDC device.

If a cloud-based customer server is used instead of the SICK online portal, it is not

possible to transmit the sensor data directly. However, there is the option to access the

data on the customer server using the MQTT interface of the device in question.

The TDC device alarm management system can be configured and used to trigger a real-

time alarm in the form of SMS messages via input signals.

Fig. 8: The TDC device as a sensor data sender

3 SYSTEM DESCRIPTION

20

8021804/2017-11-27|SICK

TRANSLATION OF THE ORIGINAL INSTRUCTIONS | Telematic Data Collector

Subject to change without notice

Permanent data transmission in online mode

The TDC device is connected to a voltage supply and permanently supplied with voltage.

It is also always connected to the mobile network via the SIM card. The GPRS access data

for the SICK online portal is shared with the device through the TDC Configurator

configuration software.

This means that the TDC device is always online, regardless of whether the vehicle or

machine into which the TDC is installed has been started up or not. Sensor data is

therefore always transmitted in real time – even when the motor is not running. Given an

appropriate connection to the TDC device, starting up a motor or machine would therefore

constitute a signal in itself, which could then be transmitted and analyzed.

Data storage in offline mode

If there is no mobile signal, the data received from the connected sensors is stored on the

internal device memory. No matter how many sensors are connected, sensor data can be

stored for up to one month.

If the device is not connected to a voltage supply, it will not be possible to save sensor data.

The TDC device will be back online as soon as a connection to the mobile network is

reestablished, and at this point the sensor data that has been saved will be transmitted

automatically to the SICK online portal. When using an internal customer server, it will be

possible to access data again once the connection has been restored.

Fig. 9: Data storage on the TDC device in offline mode

If the connection to the mobile network is interrupted for longer than one month, the data

stored on the internal device memory will be overwritten in line with the FIFO (first in, first

out) principle. What this means is that the data that was stored first will be the first to be

overwritten.

This principle ensures that the data from the last four weeks is always available – even

when the connection to the mobile network is interrupted for a prolonged period of time.

Device logging

TDC device activity, such as when a voltage supply is connected or the mobile network is

accessed, is reported to the SICK online portal.

Using the notification management system, the SICK online portal can issue a message

in the event of a mains voltage failure or a failure of the mobile network (for further

information on this, please also refer to Chapter 3.2.2.3 Visualization and monitoring).

Note

Page is loading ...

SICK TDC-M100 Operating instructions

This manual is also suitable for

SICK TDC-M100 Operating instructions

Related papers

Other documents