Regency Seating 9875MHBK Operating instructions

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

IMPORTANT NOTICE:

● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

● Check to be sure that you have all parts and hardware.

● Remove all wrapping materials, including staples & packing straps before you start to assemble.

● Do not tighten all screws/bolts until completely assembled.

● Keep all hardware parts out of reach of children.

9975-9875-9875L • INSTRUCTIONS

Organize your parts and hardware. You will need a Phillips head screw driver.

Hardware :

A: 75mm bolts(4) • B: 60mm bolts(4) • C: 45mm bolts(1) • D: 40mm bolts(2) • E: Wood screws(3)

F: Locking washers(9) • G: Washers(9) • H: Wood caps(2) • I: Allen Key • J: Glue

Parts :

K: Leg/Arm(2) • L: Back Frame • M: Seat Frame • N: Seat Cushion

NOTE: EACH BOLT EXCEPT FOR 2 40MM BOLTS GETS 1 LOCK WASHER(F) FOLLOWED BY 1 FLAT WASHER(G).

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

STEP 4 : Using 2 40mm Bolts(D) attach the arms to

the back of the chair. Plug the holes with Caps(H) and

Glue(J).

9975-9875-9875L • INSTRUCTIONS

STEP 3 : Attach the Leg/Arm(K) to the Seat

Frame(M) using 4 75mm Bolts(A).

STEP 2 : Attach the Seat Frame(M) to the Back

Frame(L) using a 45mm Bolt(C) in the center and 2

60mm Bolts(B) on the left side then again on the right

side.

STEP 1 : Center the Seat Cushion(N) on the Seat

Frame(M) and attach using 3 Wood Screws(E).

M B C B

This manual is also suitable for