2
ID# M4115231 04/05
(1/4”)
Loosen
Tighten
–
+
TO ADJUST TENSION
Remove the rim cover from the rim
and make adjustments as shown.
REQUIRED TOOLS AND
MATERIALS:
• (2) Stepladders 8 ft. (2.4 m)
and/or Socket Wrenches
and Sockets
• (1) Carpenter’s Level
• (2 each) 9/16” Wrenches
9/16"
(Deep-Well Sockets
are Recommended).
• (1) Phillips-Head
Screwdriver
TO LEVEL RIM
• (1) Allen Wrench (7/16”)
• (1) Allen Wrench (1/4”)
(9/16”)
+
–
Loosen
Tighten
(7/16”)
INSTALL NET
A. B.
A. Remove nylon net-holder from the rim.
B. Reinstall while inserting all net loops into slots along
ring as shown.