Mircom LT-866 QTS-5305 Installation guide

Type
Installation guide
Interior View or BB-5008 Backbox
Cutout to mount
Telephone Storage
Unit
Cutout to mount
any
display/audio
module
Cutout to mount
any
display/audio
module
Cutout to mount
any
display/audio
module
QTS-5305 TELEPHONE STORAGE UNIT
The QTS-5305 Telephone Storage Unit provides storage for up to ve remote handsets, with two telephones on
the top shelf, two on the second shelf and one below. The QTS-5305 Telephone Storage unit is ONLY mounted in
the top position of the BB-5008 and BB-5014. It comes with two brackets which are mounted to the backbox and
then the storage unit is mounted onto the brackets, which contain four threads, using four # 6 hex nuts. The QTS-
5305 also comes with a dead front which is mounted onto the backbox BB-5008 or BB-5014 with 2 # 6 screws and
closes with pem fastener. Please note that the storage unit must always be mounted on the top right -hand side
of the backbox.
The QTS-5305 Telephone
Storage Unit mounts in the top
position of the BB-5008 (shown
here) and the BB-5014.
BRACKETS (BK-415)
QTS-5305 TELEPHONE
STORAGE UNIT
DEADFRONT (CH-576)
LT-866 Rev. 1 March 2013
  • Page 1 1

Mircom LT-866 QTS-5305 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI