Merra HCF-4029-NI-BNHD-1 Operating instructions

Merra
Brand
Merra
Model
HCF-4029-NI-BNHD-1
Type
Operating instructions

This manual is also suitable for

INSTRUCTIONS
ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction
box (not included).
2. Unscrew the canopy nuts (F) and take the mounting bracket (A) off the canopy (E). Connect
your mounting bracket to your junction box using the mounting bolts (C).
3. Make electrical connections using the wire nuts (D).
4. Being careful that no wiring is left exposed, place the canopy against the mounting bracket and
secure it by replacing the canopy nuts onto the canopy bolts (B) and retightening them.
5. Install the shades (H) onto the lamp holders (G). Secure them with the socket rings (I).
6. Install your bulbs into the sockets. This fixture has been rated for two E26 bulbs (not included)
up to 60W each.
WARNING!
Read these instructions carefully prior to installation.
• Check for electric, gas, and plumbing lines before drilling or consult a professional.
• ALWAYS cut ALL relevant power before installing a lighting fixture, and do not restore
power to the line until the lamp has been FULLY installed.
• DO NOT use with bulbs exceeding the recommended wattage.
CONTACT US
Thank you for choosing our products! If you have any questions or comments,
contact us at help@cs-supportpro.com and we'll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the appropriate
app on your smartphone to scan the QR code to the right.
HCF-4029-NI HCF-4029-BK Rev. 26 Oct. 2021
Mounting Bracket (A)
Canopy Bolt (B)
Mounting Bolt (C)
Wire Nut (D)
Canopy (E)
Canopy Nut (F)
Socket Ring (I)
Lamp Holder (G)
Shade (H)
Bulb
Junction Box
V20210386
  • Page 1 1

Merra HCF-4029-NI-BNHD-1 Operating instructions

Merra
Brand
Merra
Model
HCF-4029-NI-BNHD-1
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents