Merra HCF-4038-00-BNHD-1 Operating instructions

HCF-4038-00-BNHD-1

Brand: Merra

Model: HCF-4038-00-BNHD-1

Type: Operating instructions

V20220412

Contact Us

Thank you for choosing our products! If you have any questions or

comments, contact us at [email protected] and we'll resolve your

issue ASAP!

For a .pdf copy of the latest version of these instructions, use the

appropriate app on your smartphone to scan the QR code to the right.

HCF-4038-00 Rev. 13 Apr. 2022

ASSEMBLY

1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your

junction box (not included).

2. Removethecanopynuts(F)fromthecanopybolts(B)andtakethemountingbracket(A)o

the canopy (E).

3. Connect the mounting bracket to your junction box using the mounting bolts (C).

4. Make electrical connections using the wire nuts (D).

5. Being careful that no wiring is left exposed, place the canopy against the mounting bracket

and replace the canopy nuts.

6. Remove the cap (I). Fill the LED light tube (G) with the crystals (H) and replace the cap.

7. Turn on your lamp and enjoy!

WARNING!

Read these instructions carefully prior to installation.

• Check for electric, gas, and plumbing lines before drilling or consult a professional.

• ALWAYS cut ALL relevant power before installing a lighting fixture and do not

restore power to the line until the lamp has been FULLY installed.

INSTRUCTIONS

Junction Box

Mounting Bracket (A)

Mounting Bolt (C)

Wire Nut (D)

Canopy (E)

Canopy Nut (F)

LED Light Tube (G)

Crystal (H)

Cap (I)

Junction Box

Mounting Bracket (A)

LED Light Tube (G)

Mounting Bolt (C)

Canopy (E) Canopy Nut (F)

Canopy Bolt (B)

Wire Nut (D)

Crystal (H)

Cap (I)

1

Merra HCF-4038-00-BNHD-1 Operating instructions

HCF-4038-00-BNHD-1

Brand: Merra

Model: HCF-4038-00-BNHD-1

Type: Operating instructions

Related papers

Other documents