2. Merra
  3. HCF-0602-BZ-BNHD-1

Merra HCF-0602-BZ-BNHD-1 Operating instructions

  • Hello! I've reviewed the instructions for the HCF-0602-BZ and HCF-0602-NI lamps, which details the assembly process. I'm ready to answer your questions about the installation steps, bulb recommendations, and safety precautions mentioned in the document.
  • What should I check before drilling?
    What should be done with power before starting installation?
    What type of bulbs are compatible with this fixture?
ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction
box (not included).
2. Unscrewthecanopynuts(A)fromthecanopybolts(E)andtakethemountingbracket(C)othe
canopy (G). Connect the mounting bracket to your junction box using the mounting bolts (D).
3. Make electrical connections using the wire nuts (F).
4. Being careful that no wiring is left exposed, place the canopy against the mounting bracket and
secure it by replacing the canopy nuts onto the canopy bolts.
5. Fit the shades (B) onto the lamp holders (H), screwing them into place.
6. Installyourbulbsintothesocketsonthelampholders.ThisxturehasbeenratedforfourE26
bulbs (not included) up to 40W each.
7. Restore the power, turn on your lamp, and enjoy!
CONTACT US
Thank you for choosing our products! If you have any questions or comments,
contact us at help@cs-supportpro.com and we'll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the appropriate
app on your smartphone to scan the QR code to the right.
Read these instructions carefully prior to installation.
• Check for electric, gas, and plumbing lines before drilling or consult a professional.
• ALWAYS cut ALLrelevantpowerbeforeinstallingalightingxtureanddonotrestore
power to the line until the lamp has been FULLY installed.
• DO NOT use with bulbs exceeding the recommended wattage.
INSTRUCTIONS
HCF-0602-BZ HCF-0602-NI Rev. 29 Aug. 2022
V20220829
DANGER!
Mounting Bracket (C)
Canopy (G)
Lamp Holder (H)
Wire Nut (F)
Canopy Bolt (E)
Mounting Bolt (D)
Junction Box
Canopy Nut (A)
Shade (B)
Bulb
/