2. Merra
  3. HCF-4041-CH-BNHD-1
HCF-4041-CH-BNHD-1

Merra HCF-4041-CH-BNHD-1 Operating instructions

  • Hello! I've reviewed the instructions for the HCF-4041-CH lamp. It includes steps for preparing the wiring, mounting the bracket, making electrical connections, fitting decorative tubes, and mounting shades. I am ready to answer your questions about the installation process.
  • What should I do before installing the lighting fixture?
    What is the first step in the assembly?
    What do I use to make electrical connections?
V20220415
ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction
box (not included).
2. Removethecanopybolts(E)andtakethemountingbracket(A)othecanopy(D).
3. Connect the mounting bracket to your junction box using the mounting bolts (B).
4. Make electrical connections using the wire nuts (C).
5. Being careful that no wiring is left exposed, place the canopy against the mounting bracket
and replace the canopy bolts.
6. Fitthedecorativetubes(G)ontotheSMDLEDlightplatesinsidethelampholders(H).
7. Mount the shades (F) onto the lamp holders.
8. Turn on your lamp and enjoy!
Contact Us
Thank you for choosing our products! If you have any questions or
comments, contact us at [email protected] and we'll resolve
your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.
WARNING!
Read these instructions carefully prior to installation.
• Check for electric, gas, and plumbing lines before drilling or consult a professional.
• ALWAYS cut ALL relevant power before installing a lighting fixture and do not
restore power to the line until the lamp has been FULLY installed.
INSTRUCTIONS
HCF-4041-CH Rev. 13 Apr. 2022
Junction Box
Mounting Bracket (A)
Canopy Bolt (E)
DecorativeTube(G)
Wire Nut (C)
Mounting Bolt (B)
Shade (F)
LampHolder(H)
Canopy(D)
/