2. Golden Lighting
  3. 2380-1W BLK-SD

Golden Lighting 2380-1W BLK-SD Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Golden Lighting 2380-1W BLK-SD Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IMPORTANT:
• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.
• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!
• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!
FINISHING THE INSTALLATION
4.Placethexture’sbackplate(F)overmountingstrap(B)sothatthetabsinthetopandbottomofmountingstrap(A)lineupwiththe
holesinthetopofbackplate(B).Usetheprovidedscrewdrivertoopenswivel(I).Maneouverthexture’sbodyoutofyourway.Thread
screws(C)intotheholesinthetopandbottomofthexture.Securewiththeprovidedscrewdriver.Positionthexturebackand
securethepositionbyusingthescrewdrivertoclosetheswiveljoint.
5.Installlightbulb(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommendedwattage.
6.Carefullyslideglassshade(H)oversocket(G).
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
For Customer Service, contact
the place of purchase.
AssemblyInstructions:2380-1W (Holden)
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important notes above. Remove the old xture from the wall, including
the old mounting strap.
See Figures A, B, and C above.This xture may be installed with the arm on the left (Figure B) or the right (Figure C).
1.Decidewhichdirectionyouwantarm(J)tohang.Ifneeded,usetheprovidedscrewdrivertoopenswiveljoint(I)andchangethe
directionofthearm.Onceadjusted,usethescrewdrivertoretighten.
2.Takethemountingstrapassemblyfromthepartsbag.Mountingstrap(B)containsthreadedholes.Lineuptheholesinthetop
andbottomofbackplate(F)withtheholesinthetabsofmountingstrap(B)andsecuremountingstrap(B)tothejunctionboxwith
mountingscrews(D)andascrewdriver.Tightenthescrewssecurely.
CONNECTING THE WIRES
3.Haveanassistantsupportthexture’sweightwhile
completingthewiring.Refertothewiringdiagrambelowand
attachthexture’swirestothepowersupplywiresfromthe
junctionbox.ConnectHottoHot,NeutraltoNeutral,and
GroundtoGround.Twisttheendsofthewirepairstogether,
andthentwistonawireconnector.Makesurealltwistsarein
thesamedirection.Ifthereisnohousegroundwirecoming
fromthejunctionbox,locategroundscrew(E)onthemounting
bracket/mountingstrapandwrapthexture’sgroundwire
aroundthegroundscrew.Useascrewdrivertotightenthe
topofgroundscrew(E)ontothewiresandintothemounting
bracket/mountingstrap.Tuckthewiresintothejunctionbox.
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
House Wires
Fixture Wires
Hot
H
J
J
G
F
I
Figure CFigure A Figure B
F
F
I
I
G
G
E
H
I
G
B
D
F
C
A
J
/