2. Golden Lighting
  3. 3417-BA1 PW-CC

Golden Lighting 3417-BA1 PW-CC Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Golden Lighting 3417-BA1 PW-CC Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly Instructions: 3417-BA1 (Asha)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Removeallofthecontentsfromthecarton.Seetheimportantnotesabove.Removetheoldxturefromthewall,includingtheold
mountingstrap.
1.Takemountingstrap(A)fromthepartsbag.Mountingstrap(A)containsseveralpairsofthreadedholes.Findthepairofholesthat
matchesthespacingoftheholesonthejunctionboxandyourxture’sbackplate.
2.Pullthehousewiresthroughthecenterofmountingstrap(A),andplacemountingstrap(A)overthejunctionboxsothatthetabson
mountingstrap(A)arecenteredatthetopandthebottom.Placethebackplateuptomountingstrap(A)toensurethatthescrewholes
on the tabs match the hole locations on backplate (F).
3.Securemountingstrap(A)tothejunctionboxwithmountingscrews(D)andascrewdriver.Tightenthescrewssecurely.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down
the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, please
contact the place of purchase.
CONNECTING THE WIRES
4.Haveanassistantsupportthexture’sweightwhilecompleting
thewiring.Refertothewiringdiagramandattachthexture’s
wirestothepowersupplywiresfromthejunctionbox.Connect
HottoHot,NeutraltoNeutral,andGroundtoGround.Twist
theendsofthewirepairstogether,andthentwistonawire
connector.Makesurealltwistsareinthesamedirection.Ifthere
isnohousegroundwirecomingfromthejunctionbox,locate
groundscrew(E)onthemountingbracket/mountingstrapand
wrapthexture’sgroundwirearoundthegroundscrew.Usea
screwdrivertotightenthetopofgroundscrew(E)ontothewires
andintothemountingbracket/mountingstrap.Tuckthewiresinto
thejunctionbox.
FINISHING THE INSTALLATION
5.Placebackplate(F)overmountingscrews(A)andmountingstrap(B).
6.Ensurethatarm(C)isstraight.
7.Securebackplate(F)tomountngstrap(B)bythreadingdecoscrews(H)intothesidesofbackplate(F).
8.Installlightbulb(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumwattage.
9.Carefullypushglassshade(I)upoverthebulbandsocket.Securetheshadeinplacebytighteningscrews(J)intotopcap(J).
10.Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
F
JUNCTION
BOX
EA
H
B
D
G
J
K
I
C
/