Assembly Instructions: 3417-BA2/BA3 (Asha)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Removeallofthecontentsfromthecarton.Seetheimportantnotesabove.Removetheoldxturefromthewall,includingtheold
mountingstrap.
1.Takemountingstrap(A)fromthepartsbag.Mountingstrap(A)containsseveralpairsofthreadedholes.Findthepairofholesthat
matchesthespacingoftheholesonthejunctionboxandyourxture’sbackplate.
2.Pullthehousewiresthroughthecenterofmountingstrap(A),andplacemountingstrap(A)overthejunctionboxsothatthetabson
mountingstrap(A)arecenteredatthetopandthebottom.Placethebackplateuptomountingstrap(A)toensurethatthescrewholes
on the tabs match the hole locations on backplate (F).
3.Securemountingstrap(A)tothejunctionboxwithmountingscrews(D)andascrewdriver.Tightenthescrewssecurely.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down
the xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, please
contact the place of purchase.
CONNECTING THE WIRES
4.Haveanassistantsupportthexture’sweightwhilecompleting
thewiring.Refertothewiringdiagramandattachthexture’s
wirestothepowersupplywiresfromthejunctionbox.Connect
HottoHot,NeutraltoNeutral,andGroundtoGround.Twist
theendsofthewirepairstogether,andthentwistonawire
connector.Makesurealltwistsareinthesamedirection.Ifthere
isnohousegroundwirecomingfromthejunctionbox,locate
groundscrew(E)onthemountingbracket/mountingstrapand
wrapthexture’sgroundwirearoundthegroundscrew.Usea
screwdrivertotightenthetopofgroundscrew(E)ontothewires
andintothemountingbracket/mountingstrap.Tuckthewiresinto
thejunctionbox.
FINISHING THE INSTALLATION
5.Placebackplate(F)overmountingscrews(A)andmountingstrap(B).
6.Securebackplate(F)tomountngstrap(B)bythreadingdecoscrews(H)intothesidesofbackplate(F).
7.Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumwattage.
8.Carefullypushglassshades(I)upoverthebulbandsocket.Securetheshadeinplacebytighteningscrews(J)intotopcap(J).
9.Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
F
JUN
CTION
BOX
EA
B
D
G
J
K
I
H
C