Lorex L15LD400 Series User manual

www.lorexcctv.com

15" LCD COLOR OBSERVATION

SYSTEM

With Built-In 4 Channel Triplex Digital Video

Recorder and 4 Night Vision CCD Cameras

Instruction Manual

English Version 1.0

MODEL:

L15LD400 Series

ii

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO A QUALIFIED SERVICE PERSONNEL

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE

OF PLUG TO WIDE SLOT, FULLY INSERT.

Thank you for purchasing the L15LD400 Series Observation System. Lorex is

committed to providing our customers with a high quality, reliable security product.

The L15LD400 Series observation system is one of the most sophisticated video

security systems on the market today with many of the same advanced features you

will find in “high security” systems used in banks and casinos. Perfect for any upscale

home or office, the L15LD400 is a complete packaged system that includes everything

you need; LCD Monitor with built-in 160GB Digital video recorder, cameras, brackets,

cables and power supplies.

To learn more about this L15LD400 Series Observation System and to learn about our

complete range of accessory products, please visit our website at:

http://www.lorexcctv.com

iii

Important Safeguards

In addition to the careful attention devoted to quality standards in the manufacture process of your video

product, safety is a major factor in the design of every instrument. However, safety is your responsibility too.

This sheet lists important information that will help to assure your enjoyment and proper use of the video

product and accessory equipment. Please read them carefully before operating and using your video product.

Installation

1. Read and Follow Instructions - All the safety and

operating instructions should be read before the

video product is operated. Follow all operating

instructions.

2. Retain Instructions - The safety and operating

instructions should be retained for future reference.

3. Heed Warnings - Comply with all warnings on the

video product and in the operating instructions.

4. Polarization - Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other.

A grounding type plug has two blades

and a third grounding prong.

The wide blade or the third prong are

provided for your safety.

If the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet

5. .Power Sources - This video product should be

operated only from the type of power source

indicated on the marking label. If you are not sure of

the type of power supply to your location, consult

your video dealer or local power company. For video

products intended to operate from battery power, or

other sources, refer to the operating instructions.

6. Overloading - Do not overload wall outlets of

extension cords as this can result in the risk of fire

or electric shock. Overloaded AC outlets, extension

cords, frayed power cords, damaged or cracked wire

insulation, and broken plugs are dangerous. They

may result in a shock or fire hazard. Periodically

examine the cord, and if its appearance indicates

damage or deteriorated insulation, have it replaced

by your service technician.

7. Power-Cord Protection - Power supply cords should

be routed so that they are not likely to be walked on

or pinched by items placed upon or against them,

paying particular attention to cords at plugs,

convenience receptacles, and the point where they

exit from the video product.

8. Ventilation - Slots and openings in the case are

provided for ventilation to ensure reliable operation

of the video product and to protect it from

overheating. These openings must not be blocked

or covered. The openings should never be blocked

by placing the video equipment on a bed, sofa, rug,

or other similar surface. This video product should

never be placed near or over a radiator or heat

register. This video product should not be placed in

a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the video

product manufacturer’s instructions have been

followed.

9. Attachments - Do not use attachments unless

recommended by the video product manufacturer as

they may cause a hazard.

10. Water and Moisture - Do not use this video product

near water. For example, near a bath tub, wash bowl,

kitchen sink or laundry tub, in a wet basement, near

a swimming pool and the like.

Caution: Maintain electrical safety. Powerline

operated equipment or accessories connected to

this unit should bear the UL listing mark of CSA

certification mark on the accessory itself and should

not be modified so as to defeat the safety features.

This will help avoid any potential hazard from

electrical shock or fire. If in doubt, contact qualified

service personnel.

11. Accessories - Do not place this video equipment

on an unstable cart, stand, tripod, or table. The video

equipment may fall, causing serious

damage to the video product. Use

this video product only with a cart,

stand, tripod, bracket, or table

recommended by the

manufacturer or sold with the video

product. Any mounting of the product

should follow the manufacturer’s

instructions and use a mounting accessory

recommended by the manufacturer.

iv

Important Safeguards

Service

13. Servicing - Do not attempt to service this video

equipment yourself as opening or removing covers

may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service

personnel.

14. Conditions Requiring Service - Unplug this video

product from the wall outlet and refer servicing to

qualified service personnel under the following

conditions.

A. When the power supply cord or plug is

damaged.

B. If liquid has been spilled or objects have fallen

into the video product.

C. If the video product has been exposed to rain

or water.

D. If the video product does not operate normally

by following the operating instructions. Adjust

only those controls that are covered by the

operating instructions. Improper adjustment of

other controls may result in damage and will often

require extensive work by a qualified technician

to restore the video product to its normal

operation.

E. If the video product has been dropped or the

cabinet has been damaged.

F. When the video product exhibits a distinct

change in performance. This indicates a need for

service.

15. Replacement Parts - When replacement parts are

required, have the service technician verify that the

replacements used have the same safety

characteristics as the original parts. Use of

replacements specified by the video product

manufacturer can prevent fire, electric shock or other

hazards.

16. Safety Check - Upon completion of any service or

repairs to this video product, ask the service

technician to perform safety checks recommended

by the manufacturer to determine that the video

product is in safe operating condition.

17. Wall or Ceiling Mounting - The cameras provided

with this system should be mounted to a wall or

ceiling only as instructed in this guide, using the

provided mounting brackets.

18. Heat - The product should be situated away from

heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers) that

produce heat.

Use

19. Cleaning - Unplug the video product from the wall

outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

20. Product and Cart Combination - Video and cart

combination should be moved with care. Quick

stops, excessive force, and uneven surfaces may

cause the video product and car combination to

overturn.

21. Object and Liquid Entry - Never push objects for

any kind into this video product through openings as

they may touch dangerous voltage points or

“short-out” parts that could result in a fire or electric

shock. Never spill liquid of any kind on the video

product.

22. Lightning - For added protection for this video

product during a lightning storm, or when it is left

unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the

antenna or cable system. This will prevent damage

to the video product due to lightning and power line

surges.

v

General Precautions

FCC CLASS B NOTICE

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in-

stalled and used in accordance with the instruction, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception (which can be determined by turning the equipment on

and off), the user is encouraged to try to correct the interference by one or more of the following measures:

zReorient or relocate the receiving antenna

zIncrease the separation between the equipment and receiver

zConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected

zConsult the dealer or an experienced radio or television technician for assistance

LOREX TECHNOLOGY INC.

http://www.lorexcctv.com

NOTE

This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and LVD. Therefore, it

is designated to provide reasonable protection against interference and will not cause interference with other appliance

usage.

However, it is imperative that the user follows this manuals guidelines to avoid improper usage which may result in

damage to the unit, electrical shock and fire hazard injury

In order to improve the feature functions and quality of this product, the specifications are subject to change without

notice from time to time.

General Precautions

1. All warnings and instructions of this manual should be followed

2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water dampened cloth

for cleaning

3. Do not use this unit in humid or wet places

4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not be blocked

5. During lightning storms, or when the unit is not used for a long time, disconnect the power supply, antenna, and cables

to protect the unit from electrical surge

vi

L15LD400 Series Feature List

Monitor

• 15" High Resolution LCD Monitor with built in DVR

• Mouse control interface (mouse included)

• Trilingual interface (English, Spanish and French)

• Supports DDNS (Dynamic Domain Name Server)

• Commercial grade monitor stand

• Wall or Rack mountable (mounts sold separately)

• A full range of LOREX Pro Series CCTV cameras available for use with this system

Built-In Digital Video Recorder (DVR)

• Triplex Technology allows for recording, playback or viewing simultaneously.

• Network Interface for remote viewing over the internet***

• MJPEG video compression

• USB (Device) port for Firmware Upgrade, Backup and Image Transfer

• HDD cradle - easy to remove/upgrade/archive

• 160GB HDD Designed for Surveillance: Hard Drive is specifically designed for optimal

performance in the commercial video security applications.

Cameras

• ¼'' Color CCD image sensor

• 12 IR LEDs provides effective night vision range of 30ft (10m).

• Day/Night mode: Picture automatically switches camera to B&W delivering better clarity in

low light conditions.

• Professional Grade Weather Resistant cameras*

• Versatile Camera stand allows the camera to be mounted on the Wall or Ceiling.

• Industry standard BNC connector.

• 4 in 1 power adaptor powers all four cameras from one power source

• 60ft extension cable included.

7

Table of Contents

Getting Started .......................................................................................... 9

L15LD400 Series - Front .................................................................. 10 - 12

L15LD400 Series - Side .......................................................................... 13

L15LD400 Series - Back ......................................................................... 14

Remote Control ....................................................................................... 15

MC7521 Cameras ................................................................................... 16

Camera Installation .......................................................................... 17 - 19

Installation Warnings: ................................................................................................................ 17

Camera Stand Installation: ........................................................................................................ 17

Connecting Cameras ................................................................................................................. 18

Connecting the Mouse ............................................................................ 20

Display Modes ................................................................................. 21 - 22

Initial Loading Sequence ........................................................................................................... 21

General Display Overview ......................................................................................................... 21

Network Status Indicators .......................................................................................................... 22

Recording Mode Indicators ........................................................................................................ 22

Function Icons ........................................................................................................................... 22

HDD Status ................................................................................................................................ 22

Display Modes ................................................................................. 23 - 25

Accessing the Onscreen Setup Menu ....................................................................................... 23

Single Channel and QUAD Display Modes ............................................................................... 23

Sequence Display Mode ............................................................................................................ 24

PIP Display Mode ...................................................................................................................... 24

Zoom Mode ............................................................................................................................... 25

PTZ (Pan/Tilt/Zoom) & Focus Controls ..................................................................................... 25

Recording Mode ............................................................................... 26 - 27

Playback .......................................................................................... 28 - 31

Starting Playback Mode ............................................................................................................. 28

Stopping Playback Mode ........................................................................................................... 29

Search Mode ............................................................................................................................. 29

Percent Search .......................................................................................................................... 30

Time/Date Search ...................................................................................................................... 30

Event Search ............................................................................................................................. 31

Playback Speed Control ............................................................................................................ 31

System Setup and Navigation .......................................................... 33 - 34

System Menu - Overview .......................................................................................................... 33

Display Setup - Screen Setup ...................................................................................................34

Record Setup ................................................................................... 35 - 36

Record Setup - Record Configuration ....................................................................................... 35

Record Setup - Schedule Setup ................................................................................................ 36

8

Table of Contents

Configuration .................................................................................... 37 - 40

HDD MANAGEMENT ................................................................................................................ 37

CAMERA SETUP ...................................................................................................................... 38

MOTION SETUP ....................................................................................................................... 38

ALARM SETUP ......................................................................................................................... 39

INTERVAL SETUP .................................................................................................................... 39

TIME/DATE SETUP .................................................................................................................. 40

PASSWORD SETUP .................................................................................................................40

BUZZER SETUP ....................................................................................................................... 40

EXTERNAL DEVICE ........................................................................ 41 - 44

TCP/IP SETUP - IP SETUP ...................................................................................................... 41

TCP/IP SETUP - DDNS SETUP ................................................................................................ 41

TCP/IP SETUP - SPEED ...........................................................................................................42

PAN/TILT SETUP - COMMAND SETUP ................................................................................... 42

PAN/TILT SETUP - SPEED SETUP ......................................................................................... 43

SPOT SETUP ............................................................................................................................ 43

RS232C SETUP ........................................................................................................................ 44

BACKUP ................................................................................................. 44

USB BACKUP SUBMENU ........................................................................................................ 44

Data Backup ........................................................................................... 45

FIRMWARE UPGRADE .......................................................................... 45

Troubleshooting ...................................................................................... 46

Observation System Specifications - Appendix #1 ................................. 47

Monitor Specifications ............................................................................................................... 47

DVR Specifications .................................................................................................................... 47

MC7521 Camera Specifications - Appendix #2 ...................................... 48

Full Connectivity Diagram - Appendix #3 ................................................ 49

Connecting a Slave (Spot-Out) Monitor - Appendix #4 ........................... 50

Connecting Motion / Alarm Device - Appendix #5 .................................. 51

Connecting PTZ Cameras - Appendix #6 ............................................... 52

Connecting to a PC using the Serial Port - Appendix #7 5 ........................ 3

Hard Drive Replacement - Appendix #8 .......................................... 54 - 55

Optional Accessories .............................................................................. 56

9

Getting Started

The SG19LD804-161 comes with the following components:

CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE

SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE.

1 x REMOTE CONTROL

2 x AA BATTERIES

1 x 10’ ETHERNET

CABLE

4 x 60 FT. (18M)

EXTENSION CABLES

4 x CAMERAS

4 x METAL STANDS

1 x POWER ADAPToR

LCD & DVR COMBO UNIT

WITH INSTALLED 160 GB HDD

1 x HARDWARE MANUAL

1 x SOFTWARE MANUAL

1 x QUICK START GUIDE

1 x SOFTWARE CD

1 x 4-SPLITTER CAMERA

POWER ADAPTOR

10

L15LD400 Series - Front

1. DISPLAY CONTROL BUTTONS - Control the onscreen display of Cameras:

• SEQ - Displays cameras 1~4 in Full Screen Sequencing Mode

• PIP - Displays cameras in Picture in Picture mode. The displayed cameras can be set by

selecting either the main screen or PIP screen, and selecting a number 1~4.

• ZOOM - Zooms in on the currently displayed camera (1x Zoom). Use the direction buttons or

mouse and move to the area to be enlarged.

• P/T - Enters PTZ (Pan / Tilt / Zoom) control mode. A PTZ type camera (not included) is required

to use the PTZ Functions.

2. MENU - Enters the System Menu and Setup.

3. ESC - Exits the System Menu and Setup.

4. +/ - BUTTONS - Adjusts the System Menu and Setup values.

5. LCD MONITOR POWER BUTTON - Turns the LCD Monitor Power ON/OFF.

NOTE: The system will continue to record when the LCD Monitor is powered off.

6. SPEAKER - Provides sound with Left and Right speakers.

1 2 3 4 5 6

8 9 10 117

11

L15LD400 Series - Front

7. IR RECEIVER & LED INDICATORS:

• IR RECEIVER - Receiver for the Remote Controller signal.

• DVR STATUS LEDs:

zPOWER - Power LED indicator for the System power status (ON/OFF).

zHDD - HDD access LED indicated when activity is taking place on the system Hard drive.

8. 0~9 BUTTONS - Switches the full screen view between channels 1~4. Numbers 0~9 are used

to enter the System Password.

9. SEARCH & MODE BUTTONS:

• SEARCH - Enters search mode (search through previously recorded data). Search by

percentage, date / time, or the event list.

• MODE - Switches between full and split screen displays.

1 2 3 4 5 6

8 9 10 117

12

L15LD400 Series - Front

10. PLAYBACK CONTROLS:

• BACK – Reverses the playback.

• STOP - Stops the playback.

• PAUSE – Pauses the playback.

• PLAY - Plays back the recorded data.

• REW - Fast Rewind of the playback

• STEP - Playback step by step (frame by frame)

• FF - Fast Forward of the playback

11. DIRECTION ARROWS & ENTER:

• DIRECTION ARROWS - Moves the mouse cursor and navigates within the System Menu.

• ENTER- Confirms the selected options in the System Menu.

1 2 3 4 5 6

8 9 10 117

13

L15LD400 Series - Side

1. REMOVABLE DRIVE BAY - Drive bay to install a removable Hard Drive.

2. DRIVE BAY LOCK - Locking mechanism for the removable drive.

3. USB BACKUP PORT - Connect a USB memory stick or USB HDD for data backup

4. DEVICE PORT - Connect to a PC for firmware upgrade.

5. USB MOUSE PORT - Connection port for a USB Mouse (alternate control for the System).

1 2 3 4 5

14

L15LD400 Series - Back

1. ALARM BLOCK CHART - Outlines the Alarm Block connections

2. RS-232C - Connection port to the PC or for other DVR control devices

3. ALARM BLOCK & RS485 CONNECTIONS - Controls Alarm devices, and for direct connection

to PTZ cameras. 4 sensor inputs and 1 relay output.

4. ETHERNET - Connects the System to a network router or other Ethernet Device.

5. CH 1~4 - BNC Camera inputs for Channels 1~4.

6. MONITOR / SPOT OUT PORTS:

• MONITOR - Connection to a slave monitor.

• SPOT- Connection to monitor using SPOT OUT.

7. PS/2 MOUSE PORT - Connection for a PS/2 mouse

8. POWER INPUT PORT - Connection for the DC Power Input (12V).

1 2 3 4 5 6 7 8

15

Remote Control

Listed below is a quick reference for the Remote Control.

CHANNEL BUTTONS -

Press 1~4 to select a

specific camera by

number. Use 0~9 to

enter the system

password

ESC BUTTON -

Returns to the previous

selection in Menu Mode.

Exits the Menu Setup

when in the Main Menu.

SEQUENCE -

Turns camera

Sequence Mode ON/

OFF.

MENU BUTTON -

Opens the Main Menu

(system setup)

ENTER BUTTON -

Applies a configuration

change in Menu Mode.

SEARCH BUTTON -

Enters the Search

Menu.

ZOOM -

Zooms in on the current

image NAVIGATION

CONTROLS -

Navigates in MENU and

SEARCH mode.

Adjusts the zoomed

area in ZOOM mode.

NOTE: All Buttons described above function the same as the Front Panel buttons - see pages

10-12 for detailed information. Buttons without descriptions do not provide functionality to this unit.

VOLUME + / -

PIP -

Changes the display to

Picture in Picture mode

P/T -

Controls the PTZ

Camera (not included).

PLAYBACK

CONTROLS -

Controls the playback of

video.

16

MC7521 Cameras

The System includes 4 CCD Color IR Day/Night Indoor/Outdoor Cameras*

* Picture changes from Color to B&W under low light conditions.

INPUT CABLE - BNC

Sends Video to the System

STAND -

Stand connects to the

Camera for mounting to

walls, ceilings and other

surfaces

INFRA-RED LEDs -

Provides illumination for low

light conditions

CAMERA LENS

INPUT CABLE - POWER

Provides power for the

camera.

17

Camera Installation

Before you install the camera, carefully plan where and how you will position the camera, and

where you will route the cable that connects the camera to the System.

Installation Warnings:

• Select a location for the camera that provides a clear view of the area you want to monitor,

which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.

• Plan the cables’ route so that it is not close to power or telephone lines, transformers,

microwave ovens or other electrical equipment that could interfere with the system.

• Select a location for the camera that has an ambient temperature between 14°F~113°F

(-10°C~45°C)

• If you plan to install the camera in a location that has conditions not recommended in this

manual, consult with a professional installer and consider use of a separate camera cover

or housing

• Before starting permanent installation, have another person hold the camera for you while

you verify its performance by observing the image on the monitor.

Camera Stand Installation:

1. Attach the pedestal to the ceiling, wall or other surface by the base using the provided

screws.

2. The mounting bracket must be attached to

a structural device such as a wall stud or

ceiling rafter using the supplied screws.

3. Attach the camera to the pedestal. Adjust

the angle of the camera, and tighten the

thumbscrew to set the position

NOTE: The Camera can be attached to the stand

using the screw point on the top or the bottom (to

maintain proper camera alignment). This prevents

the image from becoming inverted.

18

Camera Installation

Connecting Cameras

1. Connect the Female BNC end of the supplied 60’ extension’ cable to the camera. Connect the

male Power end of the extension cable to the camera.

IMPORTANT NOTE: The ends of the extension cable are NOT the same - one end has a Male

power port, and the other has a Female power port. Before permanently running the Camera

Extension Cable, make sure that the cable has been oriented between the Camera and the unit

correctly

Male Power Port - The male power port

end of the Extension cable connects to

the Camera.

Female Power Port - The female power

port end of the Extension cable

connects to the System.

19

Camera Installation

2. Connect the Female end of the supplied 60’ extension cable to an open BNC camera input on

the back of the System. Connect the female Power end of the extension cable to the 4-cable

power adaptor.

NOTE: To access the Connection Ports for the System, the monitor can be tilted

forward (for easier access).

20

Connecting the Mouse

Connect the supplied mouse to the PS/2 Port on the back of the unit. Alternatively, a mouse can

be connected to the USB port located on the side of the unit.

Mouse Controls

USB Connection - A mouse can be connected

to the USB Port on the side of the unit. The port

will be labelled to indicate the connection type.

USB Connection - A mouse can be connected

to the PS/2 Port on the back of the unit.

RIGHT MOUSE -

Used to decrease

values in MENU Mode.

SCROLL WHEEL -

Increases / Decreases

values in Menu Mode.

Zooms IN/OUT in

ZOOM View mode.

Changes the playback

speed.

LEFT MOUSE -

Click to activate a

function.

Used to increase values

in MENU Mode.

Page is loading ...

Lorex L15LD400 Series User manual

This manual is also suitable for

Lorex L15LD400 Series User manual

Related papers

Other documents