2. Falcon Electronics
  3. B099GHV2WM
B099GHV2WM

Falcon Electronics B099GHV2WM User manual

  • Hello! I'm your chat assistant. I've reviewed the provided instructional manual for the 2nd Gen Heavy Duty WIRED Backup Cam System. This document covers how to operate the 7" LCD monitor, including its buttons for switching between cameras and accessing menu settings. I am ready to answer any questions you may have about the device and its features like the 1080P camera, super night vision, and the different input options.
  • How do I switch between cameras?
    How do I adjust the monitor's settings?
    How do I install the monitor?
2nd Gen Heavy Duty WIRED Backup Cam System with
7” LCD! With 1080P Cam, Super Night Vision!
Instructional Manual
SAFETY DRIVING
Please read this instruction manual care fully before operating this device
LCD COLOR MONITOR OPERATING INSTRUCTIONS
In order
to operate this device properly,please read this operating instruction manual carefully and keep it for future reference
LCD COLOR MONITOR OPERATING INSTRUCTIONS
1. Appearance and functions
■ 7" LCD Monitor
2 3 4 5 6 7 8
1.Remote control
2.Switch between Cams: Video1(Camera 1:AHD1/CVBS1}/_Video2(Camera 2:AHD2 /CVBS2)
3.Enable/Disable parking grids lines / When i Menu Settings: Select/Ok Button
4.Menu settings: PIC-CAR-MODE-SET
5.Select button left
6.Select button right
7.Power on/off
8.Remote Sensor
1
REMOTE CONTROL
■Replace the battery of Remote Controller
Push
1. Power Button
2. V1/V2 Mode Button
3. Select Left Buton
4. Menu Button
5. Select Right Button
6. Enable/Disable Parking Grid Lines
1
2
6
5
34
Standard Monitor Installation Directly On A Dash
Use included screws to directly screw U type bracket mount.
The adjustable angel is forward 30° and backward 30°
OPERATING INSTRUCTIONS
(1) Referring to the remote battery diagram. Pull out the plastic within the battery compartment.
(2) When using the remote controller, it should be directly aimed at the sensor window to work properly.
(3) Press Power button on remote or on monitor
(4)Example of installation diagram below:
Additional Parameters:
•Display size: 7"
•Display format:1024 x 600P
•System:NTSC/PAL
•Power supply:DC 9V-36V
•Power::S 3W
•Resolution:1920x1080p
•Two ways:AHD/CVBS input
•Car reversing function. image switch to V2
•Remote control full function,OSD menu
•Brightness:450cd/m2
•Adjustable contrast, color and brightness
Male:
1. Video
in(AHD.CVBS)
2. Audio in (or Empty)
3. Ground out
4. Power out+12
/