Lorex LW2702 series User manual

Brand: Lorex

Model: LW2702 series

Category: Supplementary music equipment

Type: User manual

This manual is also suitable for

LW2702

DIGITAL WIRELESS QUAD LCD

SURVEILLANCE SYSTEM

Instruction Manual

www.lorexcctv.com

MODELS:

LW2702 Series

English Version 1.0

WITH BUILT-IN VIDEO RECORDER/INTERCOM

AND INDOOR/OUTDOOR MOTION CAMERA

www.lorexcctv.com

Important Safeguards

Thank you for purchasing the Digital Wireless Quad View Monitoring System.

This manual refers to the following products:

• LW2702 Series

Please visit us on the web for the most current Manuals, Quick Start Guides and Firmware.

Additional Language Manuals may also be available at:

www.lorexcctv.com

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

products ‘ enclosure that may be of sufficient magnitude

to constitute a risk of electric shock

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accom

the a

liance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

THE PLUG TO THE WIDE SLOT AND FULLY INSERT.

www.lorexcctv.com

LOREX IS COMMITTED TO FULFILLING YOUR SECURITY NEEDS

BEFORE YOU START

THIS PRODUCT MAY REQUIRE PROFESSIONAL INSTALLATION

• We have developed user friendly products and documentation.

Please read the Quick Start Guide and User Manual before you

install this product.

• Consumer Guides and Video Tutorials are available on our web

site at www.lorexcctv.com/support

• If you require further installation assistance, please visit

www.lorexcctv.com/installation or contact a professional

installer.

• Please refer to the “Need Help” insert for technical support and

customer care information.

• Please note that once the components of this product have been

unsealed, you cannot return this product directly to the store

without the original packaging.

www.lorexcctv.com

AVANT DE

COMMENCER

ANTES DE

EMPEZAR

LOREX SE COMPROMETE A SATISFACER

SUS NECESIDADES EN SEGURIDAD

LOREX S’ENGAGE À SATISFAIRE

VOS BESOINS SÉCURITAIRES

ESTE PRODUCTO PUEDE EXIGIR UNA

INSTALACIÓN PROFESIONAL

CE PRODUIT POURRAIT EXIGER UNE

INSTALLATION PROFESSIONNELLE

• Veuillez lire le guide de démarrage rapide et le

mode d’emploi avant d’installer ce produit.

• Les guides du consommateur et les séances

de tutorat vidéo sont disponibles sur l’Internet en

visitant www.lorexcctv.com/support

• Si vous avez besoin de l’aide pour l’installation,

veuillez visiter www.lorexcctv.com/installation

ou contactez un spécialiste en installation

• Veuillez référer à l’insert “Need Help” pour

ob¬tenir de l’information sur le service à la cli-

entèle et le support technique

• Veuillez constater qu’une fois que les

com¬posantes de ce produit ont été retirées de

l’emballage, vous ne pourrez plus retourner ce

produit directement au magasin.

• Favor de leer la guía de instalación rápida y la

guía del usuario antes de instalar este producto.

• Puede conseguir las guías del consumidor y

los cursos en enseñanza video sobre el Internet

visitando www.lorexcctv.com/support

• Si necesita ayuda para la instalación, visite

www.lorexcctv.com/installation o contacte un

especialista en instalaciones

• Favor de referir al documento “Need Help” para

obtener información acerca del servicio al cliente

y al soporte técnico

• Favor de notar que una vez que los compo-

nentes de este producto han sido removidos del

embalaje, no podrá devolver este producto di-

rectamente a la tienda

NORTH AMERICA: 1-888-425-6739 (1-888-42-LOREX)

MEXICO: 1-800-514-6739

INTERNATIONAL: +800-425-6739-0

(Example: From the UK, dial 00 instead of +)

Technical Support (for technical/installation issues)

Press option 1 for English, and then press option 1

By Phone:

Customer Care (for warranty and accessory sales)

Press option 1 for English, and then press options 2 to 5

Technical Support (for technical/installation issues)

[email protected]

By Email:

Customer Care (for warranty and accessory sales)

[email protected]

Customer Feedback

[email protected]

Product Support is available 24/7 including product

information, user manuals, quick start up guides and FAQ’s

at www.lorexcctv.com/support

Online:



To order accessories, visit

www.lorexcctv.com

DO NOT RETURN THIS PRODUCT TO THE STORE

NEED HELP?

3 EASy WAyS TO CONTACT US:

Please make sure to register your product at www.lorexcctv.com to receive product updates and information

NO DEVUELVA ESTE PRODUCTO A LA TIENDA

3 maneras sencillas de comunicarse

con nosotros:

NE RETOURNEZ PAS CE PRODUIT AU MAGASIN

3 façons faciles de nous contacter:



L’AMÉRIQUE DU NORD: 1-888-425-6739 (1-888-42-lorex)

MEXICO: 1-800-514-6739

INTERNACIONAL: +800-425-6739-0

(Ejemplo: Desde el Reino Unido, marque el 00 en lugar del +)

soporte técnico (para asuntos técnicos/la instalación)

oprima la opción 1 para inglés y luego oprima la opción 1

Por Teléfono:

servicio al cliente (respecto a la garantía y a la venta de

accesorios) oprima la opción 1 para inglés y luego oprima

las opciones 2 A 5

sus opiniones son bienvenidas en

[email protected]

para colocar pedidos de accesorios, visite

www.lorexcctv.com

apoyo al producto disponible 24/7 incluyendo infor-

mación del producto, manuales para el usuario, guías

de inicio rápido y preguntas más frecuentes en

www.lorexcctv.com/support

En línea:



www



NORTE AMÉRICA: 1-888-425-6739 (1-888-42-lorex)

MEXICO: 1-800-514-6739

INTERNATIONAL: +800-425-6739-0

(Exemple: À partir du Royaume-Uni, composez 00 au lieu de +)

support technique (pour les questions techniques et

d’installation) appuyez sur l’option 1 pour l’anglais, et

ensuite sur l’option 1

Par Téléphone:

service à la clientèle (pour les questions de garantie

et les ventes d’accessoires) appuyez sur l’option 1 pour

l’anglais, et ensuite sur les options 2 à 5

nous serions heureux de recevoir vos

commentaires à [email protected] pour

commander des accessoires, visitez

www.lorexcctv.com

Veuillez veiller à enregistrer votre produit à www.

lorexcctv.com/registration pour recevoir des mises à

jour et l’information de produit

Cerciórese de por favor colocar su producto en www.

lorexcctv.com/registration para recibir actualizacio-

nes y la información del producto

NECESITA AYUDA

COMUNÍQUESE PRIMERO

CON NOSOTROS

VOUS AVEZ BESOIN

D’AIDE?

CONTACTEZ-NOUS

D’ABORD

Pour commander des accessoires, visitez

www.lorexcctv.com

le support des produits est disponible 24 heures sur 24, 7

jours sur 7, y compris les informations sur les produits, les

guides de l’utilisateur, les guides de démarrage rapide et les

foires à questions

www.lorexcctv.com/support

En ligne:



www

Para colocar pedidos de accesorios, visite

www.lorexcctv.com

Commentaires des clients

[email protected]



support technique (pour les questions techniques et

d’installation) [email protected]

Par Courriel:

service à la clientèle (pour les questions de garantie

et les ventes d’accessoires)

[email protected]

soporte técnico (para asuntos técnicos/la instalación)

[email protected]

Por Correo Electrónico:

servicio al cliente (respecto a la garantía y a la venta

de accesorios)

[email protected]

Comentarios de cliente

[email protected]

Important Safeguards

In addition to the careful attention devoted to quality standards in the manufacture process of

your video product, safety is a major factor in the design of every instrument. However, safety is

your responsibility too. This sheet lists important information that will help to assure your

enjoyment and proper use of the video product and accessory equipment. Please read them

carefully before operating and using your video product.

Installation

1. Read and Follow Instructions - All the safety

and operating instructions should be read

before the video product is operated. Follow

all operating instructions.

2. Retain Instructions - The safety and

operating instructions should be retained for

future reference.

3. Heed Warnings - Comply with all warnings

on the video product and in the operating

instructions.

4. Polarization - Do not defeat the safety

purpose of the polarized or grounding-type

plug.

5. Power Sources - This video product should

be operated only from the type of power

source indicated on the marking label. If you

are not sure of the type of power supply to

your location, consult your video dealer or

local power company. For video products

intended to operate from battery power, or

other sources, refer to the operating

instructions.

6. Overloading - Do not overload wall outlets of

extension cords as this can result in the risk

of fire or electric shock. Overloaded AC

outlets, extension cords, frayed power cords,

damaged or cracked wire insulation, and

broken plugs are dangerous. They may result

in a shock or fire hazard. Periodically

examine the cord, and if its appearance

indicates damage or deteriorated insulation,

have it replaced by your service technician.

7. Power-Cord Protection - Power supply

cords should be routed so that they are not

likely to be walked on or pinched by items

placed upon or against them, paying

particular attention to cords at plugs,

convenience receptacles, and the point where

they exit from the video product.

o A polarized plug has two blades with

one wider than the other.

o A grounding type plug has two

blades and a third grounding prong.

o The wide blade or the third prong is

provided for your safety.

o If the provided plug does not fit into

your outlet, consult an electrician

for replacement of the obsolete

outlet

8. Ventilation - Slots and openings in the case

are provided for ventilation to ensure reliable

operation of the video product and to protect

it from overheating. These openings must not

be blocked or covered. The openings should

never be blocked by placing the video

equipment on a bed, sofa, rug, or other

similar surface. This video product should

never be placed near or over a radiator or

heat register. This video product should not

be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is

provided or the video product manufacturer’s

instructions have been followed.

9. Camera Extension Cables – Check the rating

of your extension cable(s) to verify

compliance with your local authority

regulations prior to installation.

10. Attachments - Do not use attachments

unless recommended by the video product

manufacturer as they may cause a hazard.

11. Water and Moisture - Do not use this video

product near water. For example, near a bath

tub, wash bowl, kitchen sink or laundry tub, in

a wet basement, near a swimming pool and

the like. Caution: Maintain electrical safety.

Power line operated equipment or

accessories connected to this unit should

bear the UL listing mark of CSA certification

mark on the accessory itself and should not

be modified so as to defeat the safety

features. This will help avoid any potential

hazard from electrical shock or fire. If in

doubt, contact qualified service personnel.

12. Accessories - Do not place this video

equipment on an unstable cart, stand, tripod,

or table.

The video equipment may fall,

causing serious damage to the

video product. Use this video

product only with a cart, stand,

tripod, bracket, or table

recommended by the

manufacturer or sold with the

video product.

Any mounting of the product should follow

the manufacturer’s instructions and use a

mounting accessory recommended by the

manufacturer.

Important Safeguards

Service

13. Servicing - Do not attempt to service this

video equipment yourself as opening or

removing covers may expose you to

dangerous voltage or other hazards. Refer all

servicing to qualified service personnel.

14. Conditions Requiring Service - Unplug this

video product from the wall outlet and refer

servicing to qualified service personnel under

the following conditions.

A. When the power supply cord or plug is

damaged.

B. If liquid has been spilled or objects have

fallen into the video product.

C. If the video product has been exposed to

rain or water.

D. If the video product does not operate

normally by following the operating

instructions. Adjust only those controls

that are covered by the operating

instructions. Improper adjustment of

other controls may result in damage and

will often require extensive work by a

qualified technician to restore the video

product to its normal operation.

E. If the video product has been dropped or

the cabinet has been damaged.

F. When the video product exhibits a distinct

change in performance. This indicates a

need for service.

15. Replacement Parts - When replacement

parts are required, have the service

technician verify that the replacements used

have the same safety characteristics as the

original parts. Use of replacements specified

by the video product manufacturer can

prevent fire, electric shock or other hazards.

16. Safety Check - Upon completion of any

service or repairs to this video product, ask

the service technician to perform safety

checks recommended by the manufacturer to

determine that the video product is in safe

operating condition.

17. Mounting - The cameras provided with this

system should be mounted only as instructed

in this guide, using the provided mounting

brackets.

18. Heat - The product should be situated away

from heat sources such as radiators, heat

registers, stoves, or other products (including

amplifiers) that produce heat.

Use

19. Cleaning - Unplug the video product from the

wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp

cloth for cleaning.

20. Product and Cart Combination - Video and

cart combination should be moved with care.

Quick stops, excessive force, and uneven

surfaces may cause the video product and car

combination to overturn

21. Object and Liquid Entry - Never push objects

for any kind into this video product through

openings as they may touch dangerous

voltage points or “short-out” parts that could

result in a fire or electric shock. Never spill

liquid of any kind on the video product

22. Lightning - For added protection for this

video product during a lightning storm, or

when it is left unattended and unused for long

periods of time, unplug it from the wall outlet

and disconnect the antenna or cable system.

This will prevent damage to the video product

due to lightning and power line surges. The

manufacturer’s instructions and use a

mounting accessory recommended by the

manufacturer.

General Precautions

1. All warnings and instructions in this manual should be followed

2. Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a water

dampened cloth for cleaning

3. Do not use this unit in humid or wet places

4. Keep enough space around the unit for ventilation. Slots and openings in the storage cabinet should not

be blocked

www.lorexcctv.com

FCC NOTICE

This device complies with Part 15, subpart C, of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause

undesired operation.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user's authority to

operate the equipment.

However, it is imperative that the user follows the guidelines in this manual to avoid

improper usage which may result in damage to the unit, electrical shock and fire hazard

injury

In order to improve the feature functions and quality of this product, the specifications are

subject to change without notice from time to time.

Features

Technology

 Ultra Digital Wireless technology features the latest advancements in wireless video surveillance

 Minimizes interference with other devices such as wireless routers, cordless phones, Bluetooth

devices and is Wi-Fi friendly

 100% Digital video and audio provides excellent image quality and crystal clear sound

 Offers a secure connection between the receiver and camera for total privacy

 Signal strength and out of range notifications help you find best possible installation location

7” LCD Receiver

 7” Color LCD monitor with built-in wireless receiver and video recorder

 Five preloaded scenery images enable digital picture frame simulation when no motion is

detected by the cameras

 Video recorder features an SD memory card slot

 Includes SD memory card and supports up to 16GB size

 Record when motion is detected by the camera or schedule a recording start and stop time

 Record at VGA (640 x 480) resolution for excellent playback quality or QVGA (320 x 240) resolution

to maximize recording time

 Viewing Options:

• Quad Mode Shows up to 4 Camera Views on Same Screen

• Auto Sequence Mode displays all cameras in Full Screen

• Single Channel Full Screen viewing

• Screen Saver mode with Motion Activated Single Channel Full Screen Viewing

 Intercom function allows for 2-way communication between LCD receiver and camera. Speak to

the person at the camera end

 On-screen menu system makes set-up and changing settings easy

 RCA output allows you to connect to a TV or monitor for large screen viewing

 System expandable up to 4 cameras

 New recording / memory full indicators

 Place on a tabletop or wall / under counter mount with included accessories

Camera

 VGA (640x480) Resolution Camera

 IR Night Vision

 Built-in PIR motion sensor for accurate motion detection

 Durable metal weatherproof housing ideal for indoor/outdoor use

 Built-in microphone and speaker for listening and speaking

The Digital Wireless signal transmission type used by the Lorex LW2702 series is also known as FHSS –

Frequency Hopping Spread Spectrum. This type of signal is highly resistant to deliberate jamming as it

generates a channel hopping sequence using an algorithm generated by the receiver system.

Table of Contents

Getting Started ................................................................................................................................................ 9

LCD Monitor/Wireless Receiver................................................................................................................... 10

Camera........................................................................................................................................................... 11

Remote Control ............................................................................................................................................. 12

Installing the Camera ................................................................................................................................... 13

Connecting the LCD Receiver ....................................................................................................................... 14

Table Mounting........................................................................................................................................... 14

Under-the-Counter, Wall, or Ceiling Mounting......................................................................................... 16

LED Indicators on the LCD Receiver.......................................................................................................... 18

Using the System........................................................................................................................................... 19

On-Screen Display...................................................................................................................................... 19

Viewing Modes............................................................................................................................................... 21

Quad Mode .............................................................................................................................................. 21

Screen Saver Mode .................................................................................................................................... 23

Motion Detection..................................................................................................................................... 24

Screen Saver with Motion Recording......................................................................................................... 24

Setting the Time ............................................................................................................................................ 25

Recording....................................................................................................................................................... 26

Recording Mode Summary......................................................................................................................... 26

Manual Recording ...................................................................................................................................... 27

Schedule Recording ................................................................................................................................... 28

Stopping Schedule Recording ................................................................................................................ 29

Motion Recording ....................................................................................................................................... 30

Viewing Recorded Video................................................................................................................................32

Viewing Video Using the System ................................................................................................................ 32

Controlling Playback .............................................................................................................................. 34

Viewing Video Directly From the SD Card................................................................................................ 35

PC............................................................................................................................................................ 35

Mac.......................................................................................................................................................... 35

Using the Intercom........................................................................................................................................ 36

Two-Way Audio Volume.............................................................................................................................. 36

Using the Main Menu..................................................................................................................................... 37

Camera On/Off............................................................................................................................................ 38

Record ........................................................................................................................................................ 39

Quality ..................................................................................................................................................... 40

Trigger Record........................................................................................................................................ 41

Schedule Record..................................................................................................................................... 42

Overwrite ................................................................................................................................................ 43

Pairing ........................................................................................................................................................ 44

Settings....................................................................................................................................................... 46

Date & Time ............................................................................................................................................ 47

Brightness .............................................................................................................................................. 48

AV Out...................................................................................................................................................... 49

Screen Saver........................................................................................................................................... 50

Alarm Volume ......................................................................................................................................... 51

Zoom ....................................................................................................................................................... 52

Format .................................................................................................................................................... 53

Default .................................................................................................................................................... 54

Table of Contents

Appendix A: System Specifications .............................................................................................................. 55

Appendix B: About Digital Wireless Technology ......................................................................................... 56

Appendix C: Adding Cameras ....................................................................................................................... 57

Appendix D: Strengthening the Range of the Wireless Signal ................................................................... 58

Extending Your Wireless Signal................................................................................................................. 58

Appendix E: Deleting Video Files on the System......................................................................................... 60

Appendix F: Estimated Recording Times on SD Cards................................................................................ 61

Appendix G: Power Failure........................................................................................................................... 62

Troubleshooting ............................................................................................................................................ 63

FAQ................................................................................................................................................................. 64

Getting Started

The system comes with the following components:

CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM,

INCLUDING ALL COMPONENTS SHOWN ABOVE.

1 x 7” LCD

MONITOR/WIRELESS

RECEIVER

3 x POWER ADAPTERS

(FOR RECEIVER &

CAMERAS)

2 x MOUNTING

KITS

1 X UNDER-THE-

COUNTER

MOUNTING KIT

2 x COLOR TWO-WAY

AUDIO OUTDOOR

CAMERA

2 x CAMERA

MOUNTING STANDS

*Camera configuration may vary by model

1 x SD MEMORY

CARD

1 x REMOTE

CONTROL

1 x TABLETOP

STAND

2 X WIRELESS ANTENNA

(FOR CAMERAS)

1 x AUDIO/VIDEO

CABLE

LCD Monitor/Wireless Receiver

Rear Panel

1. Wireless Antenna: Position the antenna as needed for best reception.

2. Power: Slide button to turn the LCD receiver ON/OFF.

3. MENU: Press to open the Main Menu.

4. Channels/Navigation Joystick: QUAD MODE ONLY—Move UP to view camera 1, RIGHT (2) to view camera 2, DOWN (3) to

view camera 3, and LEFT (4) to view camera 4; move UP/DOWN/LEFT/RIGHT to navigate menus; press the joystick to

confirm menu selections.

5. TALK: Press to talk using the Intercom; release to listen.

6. Microphone: Microphone for two-way audio.

7. DC 5V: Connect the included power adapter.

8. Wall Hanger: Use hole to hang the LCD Receiver like a picture frame.

9. Mounting Hole: Attach the included under-the-counter mount to mount the LCD Receiver underneath a counter/cupboard,

wall, or ceiling.

10. SD Card Slot: Insert up to a 16GB SD card.

11. AV OUT: Connect the Audio/Video cable to view video on an external TV or monitor (

optional

)

12. Support Stand: Attach the included support stand to position the LCD receiver like a picture frame.

13. Speaker: Speaker for two-way audio.

VGA

QVGA

Pair

5 11

Camera

1. PIR Sensor: Passive IR motion sensor for more accurate motion recording.

2. Microphone: Built-in microphone underneath camera body.

3. Lens: Camera lens.

4. Night Vision IR: Night vision IR LEDs used for viewing in complete darkness.

5. Speaker: Speaker for two-way audio.

6. Pair: Pairing button. For more details, see “Appendix C: Adding Cameras” on page 57.

7. Antenna: Wireless antenna.

8. Power Cable: Connect the included power adapter to the cable extending from the camera.

Remote Control

1. 1/: Move menu cursor UP;

change time settings; start/pause

playback; jump to camera 1 while

in Quad Mode;

2. Enter: Confirm menu selections.

3. 4/: Move menu cursor LEFT;

rewind playback; jump to camera 4

while in Quad Mode; decrease

values in certain menu options.

4. MENU / Back: Press to open the

Main Menu; close menu windows.

5. Record: Press Motion to enable

motion recording – system will

ONLY record when motion is

detected; press to start/stop

manual recording.

6. Volume: Increase/decrease

volume of two-way audio from the

receiver; increase/decrease

volume during playback.

7. Quad: Press to change the display

view to quad (4-way) split-screen.

8. 2/: Move menu cursor RIGHT;

increase playback speed; jump to

camera 2 while in Quad Mode;

increase values in certain menu

options.

9. 3/: Move menu cursor DOWN;

change time settings; stop

playback; jump to camera 3 while

in Quad Mode.

10. Scan/Del: Press to enable/disable

Screen Saver mode; delete

recorded video files.

11. Channel: Press “A” to enable/disable automatic sequence; press M to manually change the

channels (1~4).

12. AV: Press to send the image to a connected TV or monitor (AV cable required)

NOTE: Screen Saver Mode is not available if using AV-out.

ure 1.0 Remote Control

Installing the Camera

Before you install the camera, carefully plan where

and how it will be positioned, and where you will

route the cable that connects the camera to the

power adapter.

• Before starting permanent installation,

verify its performance by observing the

image on a monitor when camera is

positioned in the same location/position

where it will be permanently installed

Installation Warnings

• Aim the Cameras to best optimize the

viewing area: Select a location for the

camera that provides a clear view of the

area you want to monitor, which is free

from dust, and is not in line-of-sight to a

strong light source or direct sunlight

• Avoid installing the cameras where there

are thick walls or obstructions between the

Cameras and the Receiver*

• Select a location for the camera that has

an ambient temperature between

14°F~122°F (-10°C ~ 50°C)

To install the camera:

1. Use the included mounting screws to

mount the stand to the mounting surface:

• Mark the position of the screw holes on the

wall

• Drill holes and insert the drywall plugs as needed

• Firmly attach the stand to the wall using the provided screws

2. Screw on the wireless antenna to the rear panel of the camera.

3. Attach the camera to the mounting stand. Adjust the angle of the camera until the desired

view is set. Tighten the thumbscrews to secure the desired camera position.

4. Connect the black power cable extending from the camera to the cable of the power

adapter; plug in the power adapter to an outlet or surge protector.

NOTE: You can install additional cameras (maximum of 4 cameras). When adding cameras that were

not included in the original box, you will need to pair the cameras with the receiver. For details, see

“Appendix C: Adding Cameras” on page 57.

ure 2.0 Attach stand to mountin

surface

ure 2.1 Attach the camera to the stand

Connecting the LCD Receiver

The LCD Receiver can be setup for use on a tabletop, or mounted to a wall or underneath a

counter or cupboard.

Table Mounting

To set up the wireless receiver:

1. Attach the Tabletop Stand to the slot on the rear panel and turn counter clockwise until you

hear one “click.” Continue turning counter clockwise to position the LCD receiver as desired.

2. Insert the included SD card into the SD Card slot on the LCD receiver until you hear a

“click.” The card will not be flush when completely inserted.

NOTE: The receiver is compatible with most major brands of SD card up to 16 GB. For recording

times on SD cards, see “Appendix F: Estimated Recording Times on SD Cards” on page 61.

ure 3.0 Attach the Tableto

Stand and turn counter clockwise.

ure 3.1 Insert the SD card

Connecting the LCD Receiver

3. Connect the cable from the power adapter to the 5V DC port on the bottom panel of the

receiver, and then plug in the power adapter to an outlet or surge protector.

4. Place the receiver in a location that will have a clear reception to your camera*. Rotate the

tabletop stand to help position the LCD receiver to your liking.

OPTIONAL

: Connect the included AV cable to AV OUT port on the system for viewing on a TV,

VCR, or Monitor.

NOTE: When using AV Out, the LCD screen will be blacked out—the image will only appear on the

TV, VCR, or Monitor.

6. Slide the power switch on the rear panel to the “ON” position.

7. Adjust the antenna on the receiver as necessary to provide the clearest reception.

*Avoid installing in a location which requires the wireless signal to pass through cement, concrete, and metal

structures. This will reduce the range of transmission.

POWER

ADAPTER

Figure 3.3 Power on the

LCD receiver.

ure 3.2 Connect the 5V AC ada

ter.

Figure 3.4 Position the receiver and adjust the antenna

Connecting the LCD Receiver

Under-the-Counter, Wall, or Ceiling Mounting

To set up the wireless receiver:

1. Select a location to mount the receiver, i.e. under a counter or cupboard, wall or ceiling.

The location should have a clear reception to your camera*. Place the mounting stand in the

desired mounting position and mark holes for the screws.

2. Drill the holes, and then mount the stand to the desired surface using the provided screws.

Make sure all three screws are fastened tightly at the connection points.

3. Adjust the antenna on the LCD receiver to allow for proper clearance with your mounting

surface.

4. Attach the LCD receiver to the mounting stand. Adjust the position of the LCD receiver and

tighten the bolts with included Allen key.

5. Insert the included SD card into the SD Card slot on the left panel of until you hear a “click.”

The card will not be flush when completely inserted.

NOTE: The receiver is compatible with most major brands of SD card up to 16 GB.

ure 3.5 Mount the stand, attach the LCD receiver, and insert the SD card.

*Avoid installing in a location which requires the wireless signal to pass through cement, concrete, and metal

structures. This will reduce the range of transmission.

Page is loading ...

Lorex LW2702 series User manual

Brand: Lorex

Model: LW2702 series

Category: Supplementary music equipment

Type: User manual

This manual is also suitable for

LW2702

Download PDF

report

in other languages

français: Lorex LW2702 series Manuel utilisateur
español: Lorex LW2702 series Manual de usuario

Lorex LW2702 series User manual

This manual is also suitable for

Lorex LW2702 series User manual

in other languages

Related papers

Other documents