Lorex L19LD800 Series User manual

Brand: Lorex

Model: L19LD800 Series

Category: Video servers/encoders

Type: User manual

Lorex L19LD800 Series is an advanced observation system, facilitating remote video monitoring and management.

With its integrated remote management software (IRMS), you can effortlessly check system status, receive event notifications, and remotely monitor live camera feeds. The time-lapse and calendar search features enable convenient retrieval of recorded footage.

Remote system programming, software upgrades, and archive retrieval from the Combo DVR further enhance its functionality. The system also supports multiple remote site connections, allowing you to monitor several locations simultaneously.

Lorex L19LD800 Series is an advanced observation system, facilitating remote video monitoring and management.

LOREX CLIENT 3.0

SOFTWARE MANUAL

IRMS Integrated Remote Management Software

Instruction Manual

www.lorexcctv.com

English Version 2.0

Lorex Client 3.0 – Integrated Remote Management Software

- 2 -

Table of Contents

Overview........................................................................................- 2 -

Installation .....................................................................................- 4 -

Remote Site Setup ..........................................................................- 7 -

Favorite Group..............................................................................- 12 -

Live View......................................................................................- 15 -

Playback....................................................................................... - 17 -

Local Setup................................................................................... - 21 -

Remote Setup...............................................................................- 26 -

Appendix A – Remote access via web browser.................................- 36 -

Appendix B – Lorex Player 3........................................................... - 39 -

Appendix C - Lorex Backup Player 3 – Main Window ........................- 43 -

Installing the Lorex Backup Player 3............................................- 43 -

Lorex Backup Player 3 – Main Screen ..........................................- 47 -

Appendix D – Network Setup..........................................................- 51 -

Appendix E – Storage Calculator.....................................................- 58 -

Overview

This manual describes the operating procedures for the Lorex Client 3.0 IRMS (Integrated

Remote Management System) software designed for the L19LD800 Series Observation

System.

Lorex Client 3 - Features

The Lorex Client (IRMS program) is the integrated software that controls system

management, video monitoring and image playback of multiple remote systems. The

IRMS offers the following features:

• Check and report on the system status at a remote site

• Notification of the event detection from remote sites

• Remote monitoring of live camera images

• Time-lapse and calendar search of recorded images

• Remote software upgrades and system programming

• Remote Archive from the Combo DVR

Lorex Client 3.0 – Integrated Remote Management Software

- 3 -

Lorex Player 3 - Features

The Lorex Player is used to view video clips that are saved to:

• Archived to a USB Thumbstick (not included)

• Archived to a Removable CD-ROM Burner (not included)

Lorex Backup Player 3 – Features

The Lorex Backup Player 3 Application is a stand alone program that can be installed to

playback:

• Data archived to a removable Hard Drive (not included).

• Data mirrored to a removable Hard Drive (not included).

Product Components

• LCD & DVR Combo Unit (with pre-installed Hard Drive)

• Power Adaptor

• 10’ Ethernet Cable

• Remote Control

• Hardware Manual

• Software Manual (This Document)

• Software Installation CD

System Requirements

Operating System Microsoft Windows 98, Microsoft Windows ME, Microsoft

Windows 2000, Microsoft Windows XP or Microsoft

Windows Vista.

CPU Pentium IV 2.4Ghz, 512MB RAM, 10GB free disk or

greater

RAM 64MB or greater

Video AGP, Video RAM 32MB or higher (1024x768, 24bpp or

greater)

Lorex Client 3.0 – Integrated Remote Management Software

- 4 -

Lorex Client Installation

1. Insert the installation CD into your computer. The following installation guide window

appears.

Note: Product Documentation, Networking guides, and a video tutorial for camera

installation are available on the CD. Please take this opportunity to register your product.

This provides you with product warranty protection and product updates.

2. Click on the Lorex Client button to start the software installation for the Lorex Client

and Lorex Player.

3. When the following dialog box appears, click the Next button.

Lorex Client 3.0 – Integrated Remote Management Software

- 5 -

4. Click Next

5. Click Finish to complete the installation

The Lorex Client and Lorex Player icons are created on the Desktop.

Lorex Client 3.0 – Integrated Remote Management Software

- 6 -

After installing the Lorex Client software, run the program by double clicking on the Lorex

Client desktop icon. The log-in window may appear before the main IRMS program

window loads.

Enter your password to start the Client software.

Note: The Initial password is blank. Refer to the Local Set Up section for instructions

about changing the password settings.

The Lorex Backup Player 3 Application is a stand alone program that can be

installed on another PC to play back data archived or mirrored to a

removable Hard Drive. This application must be installed separately – please

refer to “Appendix B – Lorex Backup Player 3” for details.

Lorex Client 3.0 – Integrated Remote Management Software

- 7 -

Remote Site Setup

The following steps outline the setup for the Client software (for Remote Connection).

Click the Remote Site button, and then click the “Menu” button to add a new remote site.

The following drop down menu will appear:

Menu fields include:

• New: Adds and registers a new remote site.

• Modify: Displays the information about all remote sites registered. You can see

the pop-up window.

• System Log: Displays the system log data of the remote site selected.

• Delete: Deletes the currently selected remote site.

• Delete All: Deletes all sites registered before.

• About: Displays Lorex Client software version

Lorex Client 3.0 – Integrated Remote Management Software

- 8 -

Select the “New” option in the drop down menu, and enter the information for the

remote site to register.

The Add Site dialog box appears (see below).

Options include:

• DEVICE: Set by default to “LCD COMBO”.

• TITLE: Enter a name for the remote site.

• ID: Enter the log-in ID of the remote system (default: Admin)

• PASSWORD: Enter the log-in password of the remote system (default: blank/no

password)

• REMEMBER: If this option is checked, you can connect to the remote site without

entering password each time.

• PORT: Displays an initial port number. The port must match the one assigned to

the remote system to connect). The default port is set to 3000.

• IP/URL: Enter the IP address or domain name of the remote system:

o The Local IP address (e.g. Local Network Connection IP 192.168.12.184)

o Remote IP address (e.g. Wide Area Network IP address 72.68.122.45)

o DDNS address (e.g. myurl.strategicvista.net) for the remote site. If

registered with the LOREX DDNS service, you can enter only the prefix of

the URL. (without the suffix: .strategicvista.net).

Note: Please refer to “Appendix C - Network Configuration and Setup” for configuration

details.

Lorex Client 3.0 – Integrated Remote Management Software

- 9 -

Connection

▶ Connect using the “Connect” button.

Select the site you want to connect to from the Remote Site list, and then click the

Connect button.

Select the “Connect” option. The images from the connected system cameras will appear

in the Live View.

Lorex Client 3.0 – Integrated Remote Management Software

- 10 -

Camera Images when remotely connected to a site:

Connect Menu options include:

• Connect: Connects to the remote site selected.

• Close All: Disconnects from all remote sites currently registered.

• Close a Selected Site: Disconnects the currently selected remote site.

• Close a Selected Camera: Disconnects the currently selected camera channel.

Lorex Client 3.0 – Integrated Remote Management Software

- 11 -

▶ Connection using mouse Drag & Drop

Select a previously configured location from the “Remote Site” window, and drag it to the

live viewing location (camera display) portion of the screen. All cameras from the remote

system will be displayed.

You can also drag specific cameras to any available square in the Live View area, as

shown in the example below

The software has an advanced feature which allows you to connect to multiple sites and

view cameras from different locations simultaneously on one screen (maximum of 16

cameras). Simply drag the specific cameras from each site you wish to connect to into

the live viewing area.

Lorex Client 3.0 – Integrated Remote Management Software

- 12 -

Favorite Group

To effectively manage multiple remote sites, it is suggested the sites be assigned to a

Favorite Group.

Click the “Favorite Group” button, and then select the “Menu” button to create a new

favorite group. The drop down menu appears as shown below.

Options include:

• New: Adds and registers a new favorite group.

• Delete: Deletes the currently selected group.

• Delete All: Deletes currently registered all group.

Lorex Client 3.0 – Integrated Remote Management Software

- 13 -

Select the “New” option in the drop down menu, and enter the information for the

favorite group.

The “Add Group” window appears. Enter a group name, and then select previously

configured sites and cameras. Click the OK button to save the settings.

Options include:

• Title: Enter a name for the favorite group.

• Remote Site: Select the remote site to add as a group.

• Camera: Select a camera channel from the selected remote site.

Lorex Client 3.0 – Integrated Remote Management Software

- 14 -

▶ Connect to the Remote Sites using the “Connect” button

Select the group you want to connect to from the Favorite Group list, and then click the

Connection button to remotely connect to the site.

The drop-down menu is shown below:

Select the ‘Connect’ option. The Lorex Client displays video from the connected cameras

(as configured in the favorite group).

Menu options include:

• Connect: Connects the favorite group selected.

• Close All: Disconnects all remote site currently registered.

• Close a selected group: Disconnects the currently selected favorite group.

• Close a selected camera: Disconnects the currently selected camera channel.

Note: The drag and drop feature also works in the Favorite Group.

Lorex Client 3.0 – Integrated Remote Management Software

- 15 -

Live View

The Live View provides a remote monitoring function for video images in real time, from

either single or multiple sites. In addition, when an event is detected at a remote site,

the Live View displays the event information, and allows the user to access the remote

site directly to view the associated Video images.

Click on the Live View button

The Graphical User Interface (GUI) of the Live View is shown below:

The fields in the Client Live View window include:

1. Mode Buttons: Includes Live View buttons, Playback buttons, Remote Setup

buttons, Local Setup buttons.

2. Menu Button: New / Modify / Delete / Delete All / System Log / About.

3. Connect Button: Connects or Disconnects the selected remote site

4. Remote Site List: Displays the title of the remote system currently registered.

Lorex Client 3.0 – Integrated Remote Management Software

- 16 -

5. Remote Site Information view: Displays the system information of the remote site

selected in the remote site lists

6. PTZ Control: PTZ control buttons.

7. Emergency Event List: Displays an emergency event that was called back from

individual remote site (LAN connection only).

8. Event Viewer: displays real-time event of the remote site.

9. Schedule Recording On/Off button

10. Live Viewer Window: Displays the image for the connected 16 camera of the

remote system currently registered.

11. Multi Screen Division buttons: Includes Full buttons, 1x1 buttons, 2x2 buttons,

3x3 buttons, 4x4 buttons

12. Channel buttons.

13. Current Time.

14. Extension & Close button: Close the Lorex Client program.

15. Alarm Reset Button: Reset the internal beep of the Lorex Client.

16. Audio Button: Enable or disable the audio of channel selected in the Lorex Client

screen.

Emergency Event List Display

The Emergency Event List displays the event(s) that were downloaded from individual

remote sites. Press the Emergency View button to see the events list. A window of

Emergency Events is shown below.

Lorex Client 3.0 – Integrated Remote Management Software

- 17 -

Playback

The Client Playback searches for recorded images on the remote system, and plays back

the found images. In addition to search and playback functions, the Client Playback also

provides additional functions including file (image) save and file (image) print.

Press the Playback button

Options in the Playback window include:

1. Calendar: Search results from the remote DVR (currently connected) are

displayed by month. If there is a recorded data for a particular date, a blue

square on the date will be displayed.

2. Play Time: Displays the time of the video playing.

3. Play Buttons: You can control the remote DVR by using playback buttons. The

left-most button in the above box is the first item in the list below. Go to the first

/ Pause / Play / Stop / Step forward / Go to the last

4. Capture, Print & Archive: Captures and prints an image on playing. Archives

recorded data from the remote site currently selected to your computer.

5. Time Chart: Displays an hour-based search screen for the chosen date. If there is

data for a channel, a white section will be displayed on a 24-hour basis.

Lorex Client 3.0 – Integrated Remote Management Software

- 18 -

Time-Lapse Search

To connect to the Remote Site, use the same steps as connecting in Live View mode.

Once a connection has been established with the remote site, and recorded data has

been located for a particular date, a blue square on the date will be displayed. Selecting a

blue date will display an hour-based search screen for the chosen date. If there is data

for a channel, a white section will be displayed on a 24-hour based time chart.

In Time-lapse mode, the system searches for recorded images by time and plays back

the found images. Selecting a date from the calendar initiates time-lapse search. The

dates for which recording is available are displayed in blue characters.

Select a specific hour by clicking on the desired hour segment. A minute-based search

window will be displayed (shown below). If there is data for a channel, a blue section will

be displayed in a 60-minute segment.

Select the specific minute by clicking on the desired minute segment. Video images will

be played back starting with the first image captured within the one-hour segment.

Playback

Select a specific minute by clicking the mouse on the desired minute segment. Video

images will be played back starting with the first image captured within the one-hour

segment.

Video Playback can also be started by pressing the button.

The playback buttons include:

Press button to stop playback.

Press button to pause playback.

Press button to go to the first.

Press button to go to the last.

Press button step forward.

A blue bar in 60-minute search window indicates the playing time of recorded data.

Note: The speed of fast forward playback is dependent on the network bandwidth and

the number of images per second (FPS).

Lorex Client 3.0 – Integrated Remote Management Software

- 19 -

Additional Functions

▶ Capture ( *.BMP )

Click the Capture button to save the current image in a bitmap file format to the local

hard disk drive or floppy disk. The Save Image window is shown below. Select the save

location, and press the ‘Save’ button.

▶ Print

Click the Print button to print the current image on the printer connected to your

computer. The Print window is shown below. Select a printer, and press the ‘Print’ button.

Lorex Client 3.0 – Integrated Remote Management Software

- 20 -

▶ Archive

Click the Archive button to archive the recorded video from the remote site (currently

connected to your computer). The archive window is shown below.

Select the Days and Time Range, the channel you want to archive and press the

ESTIMATE button to calculate the size of the data to be archived.

The size is displayed in the FILE SIZE field. Enter the

name and location of the file to be archived and press

the START button. The progress bar will be displayed.

Note: During Archiving, you cannot do any other job

with the Client software until archiving is completed.

Page is loading ...

Lorex L19LD800 Series User manual

Brand: Lorex

Model: L19LD800 Series

Category: Video servers/encoders

Type: User manual

Lorex L19LD800 Series is an advanced observation system, facilitating remote video monitoring and management.

Download PDF

report

Lorex L19LD800 Series User manual

Lorex L19LD800 Series User manual

Related papers

Other documents