2. Oxford Garden
  3. Salino Bar Stool

Oxford Garden Salino Bar Stool Assembly Instructions

  • I've reviewed the assembly instructions for the Salino Bar Stool. This document provides a breakdown of the components, the necessary hardware, and step-by-step instructions to help you assemble the stool. I am here to help you with any questions you may have about the process outlined in these instructions.
  • How many short bolts are included?
    What tool is needed for assembly?
    What is the purpose of the stretcher?
    What version is this document?
    How many leg assemblies are included?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
SALINO BAR STOOL
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
Salino Bar Stool - Seat Assembly
Quantity: 1
Salino Bar Stool - Leg Assembly
Quantity: 1
2
Salino Bar Stool - Stretcher
Quantity: 1
3
Short Bolt
Quantity: 8
Allen Wrench
Quantity: 1
A
B
Ver. 06.30.20
STEP 3:
Carefully turn assembled chair in an upright position.
STEP 2:
Align Leg Assembly holes with Seat Assembly
holes . Using the wrench provided, secure with
washers and bolts . NOTE: Leave bolts slightly
loose to help with alignment of the chair seat
assembly.
INSTRUCTIONS
STEP 1:
Remove cushions from chair and place Seat Assembly
upside down on top of provided cardboard box
or blanket to protect the surface of the chair while
assembling.
STEP 2 (detail):
Ver. 2019.10.06
A
B
11
1
1
2
2
A
B
C
C
AB
/