2. Oxford Garden
  3. Classic 5′ Bench

Oxford Garden Classic 5′ Bench, CD72K, Classic 6′ Bench Assembly Instructions

  • I have reviewed the assembly instructions for the OXFORD & GARDEN CLASSIC 5' BENCH. This document provides a breakdown of the bench's components and required hardware. I'm ready to answer any questions you may have about assembling the bench or other information detailed in the instructions.
  • What tools are needed for assembly?
    What are the components of the bench?
    What type of hardware is included?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
CLASSIC ’ BENCH
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
FINISHING ITEMS
Medium Grit Sandpaper.
NOTE: Hardware pack may contain more hardware than what is needed to assemble.
A hammer and a phillips head screwdriver (not provided) will be needed for the assembly of this bench.
NOTE: If the furniture is going to be placed on a concrete or tile patio, it should first be rinsed well to remove the sawdust that may
cause some staining.
Right Arm Assembly
Quantity: 1
Left Arm Assembly
Quantity: 1
Back
Quantity: 1
Seat
Quantity: 1
5
Front Rail
Quantity: 1
Wood Screws
Quantity: 10
B
Dowels
Quantity: 14
A
Ver. 06.30.20
/