2. Oxford Garden
  3. Oxford 4′ Backless Bench

Oxford Garden Oxford 4′ Backless Bench Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the Oxford Backless 4’ Bench. This document outlines the necessary components, hardware, and tools needed for assembly. It also includes important care information about placing the bench. I'm ready to answer your questions based on these instructions.
  • What tools are needed for assembly?
    What should be done before placing the bench on a concrete patio?
    What kind of hardware are included?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
OXFORD BACKLESS 4’ BENCH
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
FINISHING ITEMS
Medium Grit Sandpaper
NOTE: Hardware pack may contain more hardware than what is needed to assemble.
A hammer and phillips head screw driver (not provided) will be needed for the assembly of this bench.
If the furniture is going to be placed on a concrete or tile patio, it should first be rinsed well to remove
the sawdust that may cause some staining.
Right Leg Assembly
Quantity: 1
Left Leg Assembly
Quantity: 1
2
Seat
Quantity: 1
3
Back Seat Rail
Quantity: 1
4
Front Seat Rail
Quantity: 1
5
Bottom Rail
Quantity: 1
6
Dowel
Quantity: 10
A
Wood Screw
Quantity: 12
B
Ver. 06.30.20
A
/