2. Oxford Garden
  3. Oxford Adirondack Chair

Oxford Garden Oxford Adirondack Chair Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the OXFORD GARDEN Adirondack Chair ADCHK. The document lists components, hardware, and finishing materials, then outlines the assembly procedure starting from Step 2, that describes attaching leg to the seat assembly. I'm ready to answer your questions about this product.
  • What is included in the components?
    What hardware is included?
    What finishing items are included?
15 Kingbrook Parkway, Suite 100 Simpsonville, KY 40067 p. 877.866.3331 f. 502.719.8888 oxfordgarden.com
Ver. 06.30.20
OXFORD ADIRONDACK CHAIR - ADCHK
ASSEMBLY INSTRUCTIONS
COMPONENTS
HARDWARE
FINISHING ITEMS
Medium Grit Sandpaper
NOTE: If the furniture is going to be placed on a concrete or tile patio, it should first be rinsed well to
remove the sawdust that may cause some staining.
Right Arm Assembly
Quantity: 1
Left Arm Assembly
Quantity: 1
Back
Quantity: 1
Seat Assembly
Quantity: 1
5
Right Leg Assembly
Quantity: 1
6
Left Leg Assembly
Quantity: 1
Bolts
Quantity: 15
A
Allen Wrench
Quantity: 2
B
Ver. 06.30.20
STEP 2
Carefully lay the chair on its side.Using three bolts, attach
one leg to the seat assembly. (Leg will be positioned
with the arm brace facing upward and to the front of the
seat assembly.) NOTE: Leave bolts slightly loose to help
with alignment of the sofa seat assembly.
/