Neutrik etherCON NE8MX-TOP Assembly Instruction

Neutrik
Brand
Neutrik
Model
etherCON NE8MX-TOP
Type
Assembly Instruction
Cut cable end approx. 45°.
Slide the bushing over the cable.
To ease the boot assembly apply some
cable pulling lubricant to the cable ends.
A
B
A
ASSEMBLY INSTRUCTION
etherCON
®
TOP NE8MX-TOP
|
, IP65 and UL50ERuggedized RJ 45 Data Connector
R
B
Page 1BDA 547 V2
~
45°
~
45°
1STANDARD CABLE ASSEMBLY
13& STANDARD ASSEMBLY OF etherCON CONNECTOR
2CABLE & BOOT ASSEMBLY WITH INSERTION TOOL
Position Insertion Tool ontothe the
cable.
Wet the tip with mounting fluid.
A
B
A
B
23& WITH ASSESSORIES:
CABLE & BOOT ASSEMBLY WITH INSERTION TOOL.
ITX-TOP: Cable insertion tool to guide the cable into the boot.
PIP65 RATED AND UL50E APPROVED.
MOUNTING VERSIONS
Slide the cable with the tool throught the
boot.
Remove the tool.
Assembl the RJ45 plug on the cable.e
Cut off release tab of RJ45 plug.the
Put chuck onto the cable.the
Align the opening with the contact side.
Position the RJ45 in the chuck.
Attention:
RJ45 must be straight.
Special versions must engage in the
inner recess of the chuck.
A1
A
A
C
B
Page 2
C
STANDARD
VERSION
SPECIAL
VERSION
B
1
2
A1
C
1
2
1
C
etherCON NE8MX-TOP
I
C
DD
3ASSEMBLY RJ45 PLUG AND CONNECTOR
BDA 547 V2
Position bushing onto chuck.the the
Slide boot to thethe unit (insert and ) in
housing and tighten the bushing.
Attention:
Screw the bushing to the end of the thread.
CAUTION:
There is no overlap allowed.
www.neutrik.com
NEUTRIK AG T: F:LI +423 / 237 24 24 +423 232 53 93/
NEUTRIK USA Inc. T: F:USA +1 704 / 972 3050 +1 704 438 9202/
NEUTRIK UK Ltd.
() T: F:UK +44 1983 / 811441 +44 1983 811 439/
NEUTRIK Vertriebs GmbH T: F:DE/NL/AT/DK +49 8131 / 280 890 +49 8131 280 830/
NEUTRIK France FR T: F:+33 1 4131 6750 +33 1 4131 0511//
NEUTRIK Tokyo Ltd. JP T: F:+81 3 3663 4733 +81 3 3663 4796//
NEUTRIK Hong Kong Ltd. T: F:HK +852 2687 6055 +852 2687 6052//
NEUTRIK India Pvt. Ltd. IND T: F:+ +91 22 26163 54091/982 05 43 424 /
R
Draft. Nr.: BDA 547 V2 Update: 28.11.2019 Data subject to change without prior notice. 201 NEUTRIK . ALL RIGHTS RESERVED.9 NEUTRIK are registered trademark.
II ©® ®
Page 3
etherCON NE8MX-TOP
I
F
0.0 mm
D
E
Find more etherCON®
details on
www.neutrik.com.
F
D
STANDARD
VERSION
SPECIAL
VERSION
E
PFINISHED etherCON®
ITX-TOP TOOL:
Find more details on
www.neutrik.com/product/
itx-top
  • Page 1 1
  • Page 2 2
  • Page 3 3

Neutrik etherCON NE8MX-TOP Assembly Instruction

Neutrik
Brand
Neutrik
Model
etherCON NE8MX-TOP
Type
Assembly Instruction
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents