Momentum Niro Installation guide

Brand: Momentum

Model: Niro

Type: Installation guide

This manual is also suitable for

MOGA-001

QUICK START GUIDE

Niro

 Download the Momentum App from the

Apple App Store or Google Play.

 Connect your mobile device Wi-Fi to the

network you want your camera to be

paired to.

Important: Make sure the app you

download matches the same logo as

shown above.

Step 1: Download the app

 Sign up for a new account.

 Once you’ve finished entering your

information, you will receive an email

verification link.

 Click on the email link to activate your

account.

 Return to the app and sign in.

Step 2: Create an Account

 Connect the Micro-USB cable to the

back of the camera and the power

adapter.

 Plug in the power adapter to an outlet.

Micro-USB

Power Port

Step 3: Plug in Niro

IMPORTANT: Make sure your mobile device

is connected to the Wi-Fi network.

 From the Momentum app, select Pair

Device.

 Select the Garage Door Controller from

the list of devices.

 Go to your mobile device’s Wi-Fi settings.

 Connect to the ‘MOGA-001’ Wi-Fi

network.

Step 4: Pair Niro

 Go back to the Momentum App.

 Your Wi-Fi network will auto load, so you

will just need to enter your network

password.

(If your Wi-Fi network did not show up,

that means your mobile device was not

connected to it prior to pairing. See ‘Step 1’

for details.)

Step 5: Connect to Wi-Fi Network

 It’s recommended to have Niro

mounted hanging upside down from

the bottom of your garage opener.

 You may use the provided sticker and

metal plate to attach the device.

Step 6: Mount Niro

Method 1

Method

 Unplug your garage opener.

 Locate your garage wall remote console.

You should see some wires that come

out of it that lead all the way to

terminals on the back of your garage

opener.

Note: If you’re still unsure which terminals to

connect the wires to, please refer to your

garage door opener’s instruction manual to

verify.

Step 7: Connect Wires to GDO

Note: Your ports may look different from this image.

 Connect Niro’s wires into the same wire

ports as your garage wall remote

console. This may require loosening the

tabs or screws depending on your garage

opener model.

 Twist the two wires together into each

terminal for a better connection,

however make sure the wall console

wires go into their original terminals.

Step 7: (continued)

Press tabs to

release

 Insert the other end of the wires into the

and 2

terminals on the back of the

Niro device. You may need to use a tool

to push down on the buttons to release

and insert the wires.

Note: Both wires are neutral, so it doesn’t

matter which color wire goes into which of the

two ports. However, make sure the open wire

ends are not touching each other.

Step 8: Connect Wires to Niro

 Plug back in your garage opener and

open the Momentum App. Select the

blue garage tile to access the garage

door control screen.

 In this screen, you will get a live view of

the state of your garage. Tap the blue

button at the bottom to control the

state of your garage door.

 Once you’ve confirmed the controls are

working, your setup is complete!

Step 9: Test the Controls

Light Indicators & Status

1. Solid Red – Booting

2. Slow Blinking Red – Disconnected

from Wi-Fi

3. Double Blinking Blue – Ready to

connect to Wi-Fi.

4. Blinking Blue – Connected to Wi-Fi

5. Solid Blue – Live streaming

Note: If the camera has failed to connect

to your Wi-Fi, try resetting the camera by

following these steps.

Reset

1. With the camera plugged in, hold

down the reset button in the back of

the camera for 10 seconds.

Quick Tips:

2. The camera will then start the reset

sequence. Note that the camera will

still be bound to the same

Momentum account it was initially

paired with.

3. During the reset sequence, the

camera’s indicator light will go from

solid red to double blinking blue,

which indicates that the camera is now

be ready to connected to the Wi-Fi

again.

Hold for 10 seconds

Quick Tips:

- The pairing method has been updated

for newer devices.

- If you are having trouble connecting or

using your device, please contact our

customer service team.

Toll Free: 1 888 818 0436

E-mail: [email protected]

Troubleshooting

Version 2.0

www.momentumcam.com

Momentum Niro Installation guide

Brand: Momentum

Model: Niro

Type: Installation guide

This manual is also suitable for

MOGA-001

Download PDF

report

Momentum Niro Installation guide

This manual is also suitable for

Momentum Niro Installation guide

Related papers

Other documents