ABB Relion REQ650 User manual

Brand: ABB

Model: Relion REQ650

Category: Measuring, testing & control

Type: User manual

Relion

650 series

Breaker protection REQ650

Product Guide

Contents

1. 650 series overview........................................................3

2. Application.....................................................................3

3. Available functions..........................................................7

4. Current protection........................................................17

5. Voltage protection........................................................19

6. Frequency protection....................................................20

7. Secondary system supervision.....................................20

8. Control.........................................................................21

9. Logic............................................................................22

10. Monitoring...................................................................24

11. Metering......................................................................26

12. Human Machine interface............................................26

13. Basic IED functions.....................................................26

14. Station communication................................................27

15. Hardware description..................................................29

16. Connection diagrams Customized...............................30

17. Connection diagrams Configured................................35

18. Technical data.............................................................53

19. Ordering for Customized IED.......................................85

20. Ordering for Configured IED........................................89

21. Ordering for Accessories.............................................92

Disclaimer

The information in this document is subject to change without notice and should not be construed as a commitment by ABB. ABB assumes no responsibility for any

errors that may appear in this document.

Trademarks

ABB and Relion are registered trademarks of the ABB Group. All other brand or product names mentioned in this document may be trademarks or registered

trademarks of their respective holders.

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

2 ABB

1. 650 series overview

The 650 series IEDs provide both customized and

configured solutions. With the customized IEDs

you have the freedom to completely adapt the

functionality according to your needs.

The 650 series IEDs provide optimum 'off-the-

shelf', ready-to-use solutions. It is configured with

complete protection functionality and default

parameters to meet the needs of a wide range of

applications for generation, transmission and sub-

transmission grids.

The 650 series IEDs include:

• Customized versions providing the possibility to

adapt the functionality to the application needs.

• Configured solutions are completely ready to

use solutions optimized for a wide range of

applications for generation, transmission and

sub-transmission grids.

• Support for user-defined names in the local

language for signal and function engineering.

• Minimized parameter settings based on default

values and ABB's new global base value

concept. You only need to set those

parameters specific to your own application,

such as the line data.

• GOOSE messaging for horizontal

communication.

• Extended HMI functionality with 15 dynamic

three-color-indication LEDs per page, on up to

three pages, and configurable push-button

shortcuts for different actions.

• Programmable LED text-based labels.

• Settable 1A/5A -rated current inputs.

2. Application

Breaker protection REQ650 IED provides a

standalone solution for applications, where the

functions related to the breaker is not preferred or

suitable to be integrated into the main protection

function that is, the line distance protection for a

line. The advanced automatic reclosing,

synchronizing, synchrocheck and energizing

check functions of REQ650 provides an optimized

stand alone product. This IED also enables well-

structured and reliable protection and control

systems especially in systems where complete

bay control functionality including interlocking is

not required.

REQ650 provides backup to the main protection

with redundant protection and control functions.

Three pre-configured packages have been

defined for the following applications:

• A01: Backup protection functions in a single

busbar single breaker bay with three-phase

trip.

• A11: Backup protection functions in a single

busbar single breaker bay with single-phase

trip.

• B11: Backup protection functions in a

double busbar single breaker bay with single-

phase trip.

The backup protection is mainly based on current

and voltage functions. In line protection

applications, autoreclosing with or without

synchrocheck is available.

The REQ650 IED is delivered pre-configured and

ready for use in the power system. Analogue

inputs and binary inputs/outputs circuits are pre-

defined.

The pre-configured IED can be modified and

adapted to suit specific applications with the

graphical configuration tool ACT inside the

PCM600 tool, For example, using the glue logic

and adjusting the parameter settings.

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2 Issued: June 2012

Revision: -

ABB 3

REQ650-A01 – Single Busbar Single breaker 10AI (4I+1I+5U)

Three phase variant

SMB RREC

79 0->1

SMP PTRC

94 1->0

SES RSYN

25 SYNC

TCS SCBR

Cond

SPVN ZBAT

Cond

Other configured functions

OV2 PTOV

59 3U>

PH PIOC

50 3I>>

CC RBRF

50BF

V MMXU

Meter.

C MMXU

Meter.

ETP MMTR

Wh<->

QA1

QB1

QB9

QC9

QC2

QC1

EF4 PTOC

51N/67N

IN>

WA1

C MSQI

Meter.

V MSQI

Meter.

CV MMXN

Meter.

CC RPLD

52PD

DRP RDRE

Mont.

V MMXU

Meter.

IEC61850

ANSI IEC

Function Enabled

in Settings

IEC61850

ANSI IEC

Function Disabled

in Settings

132 kV Bus

1000/1

132kV/110V

OC4 PTOC

51/67 3I>

IEC10000321-2-en.vsd

SDE PSDE

67N IN<->

LCPTTR

BRC PTOC

46 Iub

SDD RFUF

60FL

S SCBR

Cond

S SIMG

IEC10000321 V2 EN

Figure 1. Typical application example of the REQ650 A01 used as backup protection in a single busbar single

breaker arrangement when three-phase trip is required

Breaker protection REQ650

1MRK 505 283-BEN -

Product version: 1.2

4 ABB

REQ650-A11 – Single Busbar Single breaker 10AI (4I+1I+5U)

Single phase variant

STB RREC

79 0->1

SPT PTRC

94 1->0

SES RSYN

25 SYNC

TCS SCBR

Cond

SPVN ZBAT

Cond

Other configured functions

OV2 PTOV

59 3U>

SPT PIOC

50 I>>

CSP RBRF

50BF

V MMXU

Meter.

C MMXU

Meter.

ETP MMTR

Wh<->

QA1

QB1

QB9

QC9

QC2

QC1

EF4 PTOC

51N/67N

IN>

WA1

C MSQI

Meter.

V MSQI

Meter.

CV MMXN

Meter.

CC RPLD

52PD

DRP RDRE

Mont.

V MMXU

Meter.

IEC61850

ANSI IEC

Function Enabled

in Settings

132 kV Bus

1000/1

132kV/110V

OC4S PTOC

51/67 3I>

IEC10000322-2-en.vsd

SDE PSDE

67N IN<->

LCPTTR

BRC PTOC

46 Iub

SDD RFUF

60FL

S SCBR

Cond

TCS SCBR

Cond

TCS SCBR

Cond

S SIMG

IEC61850

ANSI IEC

Function Disabled

in Settings

IEC10000322 V2 EN

Figure 2. Typical application example of the REQ650 A11 used as backup protection in a single busbar single

breaker arrangement when single-phase trip is required

Breaker protection REQ650

1MRK 505 283-BEN -

Product version: 1.2

ABB 5

QA1

QB1

QB2

QB9

QC9

QC2

QC1

WA1

WA2

132 kV Bus

132kV/110V

132kV/

110V

132kV/

110V

REQ650-B11 – Double Busbar Single breaker 10AI (4I+1I+5U)

Single phase variant

STB RREC

79 0->1

SPT PTRC

94 1->0

SES RSYN

25 SYNC

ETP MMTR

Wh<->

EF4 PTOC

51N/67N

IN>

CV MMXN

Meter.

OC4S PTOC

51/67 3I>

SDE PSDE

67N IN<->

LFPTTR

BRC PTOC

46 Iub

SDD RFUF

60FL

S SCBR

Cond

SPT PIOC

50 I>>

CSP RBRF

50BF

C MMXU

Meter.

C MSQI

Meter.

CC RPLD

52PD

V MMXU

Meter.

OV2 PTOV

59 3U>

V MMXU

Meter.

V MSQI

Meter.

TCS SCBR

Cond

SPVN ZBAT

Cond

Other configured functions

DRP RDRE

Mont.

IEC61850

ANSI IEC

Function Enabled

in Settings

IEC10000323-2-en.vsd

TCS SCBR

Cond

TCS SCBR

Cond

V MMXU

Meter.

S SIMG

IEC61850

ANSI IEC

Function Disabled

in Settings

1000/5

IEC10000323 V2 EN

Figure 3. Typical application example of the REQ650 B11 used as backup protection in double busbar single

breaker arrangement when single-phase trip is required

Breaker protection REQ650

1MRK 505 283-BEN -

Product version: 1.2

6 ABB

3. Available functions

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

ABB 7

Back-up protection functions

IEC 61850/

Function

block name

ANSI Function description Breaker

REQ650

REQ650 (A01)

3Ph/1CB/1BB

REQ650 (A11)

1Ph/1CB/1BB

REQ650 (B11)

1Ph/1CB/2BB

Current protection

PHPIOC 50 Instantaneous phase overcurrent

protection, 3–phase output

0–1 1

SPTPIOC 50 Instantaneous phase overcurrent

protection, phase segregated output

0–1 1 1

OC4PTOC 51 Four step phase overcurrent

protection, 3–phase output

0–1 1

OC4SPTOC 51/67 Four step phase overcurrent

protection, phase segregated output

0–1 1 1

EFPIOC 50N Instantaneous residual overcurrent

protection

0–1 1 1 1

EF4PTOC 51N/67N Four step residual overcurrent

protection, zero/negative sequence

direction

0–1 1 1 1

SDEPSDE 67N Sensitive directional residual

overcurrent and power protection

0–1 1 1 1

LCPTTR 26 Thermal overload protection, one time

constant, Celsius

0–1 1 1 1

LFPTTR 26 Thermal overload protection, one time

constant, Fahrenheit

0–1 1 1 1

CCRBRF 50BF Breaker failure protection, 3–phase

activation and output

0–1 1

CSPRBRF 50BF Breaker failure protection, phase

segregated activation and output

0–1 1 1

STBPTOC 50STB Stub protection 0–1 1 1 1

CCRPLD 52PD Pole discordance protection 0–1 1 1 1

BRCPTOC 46 Broken conductor check 0–1 1 1 1

GUPPDUP 37 Directional underpower protection 0–1 1 1 1

GOPPDOP 32 Directional overpower protection 0–1 1 1 1

DNSPTOC 46 Negative sequence based overcurrent

function

0–1 1 1 1

Voltage protection

UV2PTUV 27 Two step undervoltage protection 0–1 1 1 1

OV2PTOV 59 Two step overvoltage protection 0–1 1 1 1

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

8 ABB

IEC 61850/

Function

block name

ANSI Function description Breaker

REQ650

REQ650 (A01)

3Ph/1CB/1BB

REQ650 (A11)

1Ph/1CB/1BB

REQ650 (B11)

1Ph/1CB/2BB

ROV2PTOV 59N Two step residual overvoltage

protection

0–1 1 1 1

LOVPTUV 27 Loss of voltage check 0–1 1 1 1

Frequency protection

SAPTUF 81 Underfrequency function 0–2 2 2 2

SAPTOF 81 Overfrequency function 0–2 2 2 2

SAPFRC 81 Rate-of-change frequency protection 0–2 2 2 2

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

ABB 9

Control and monitoring functions

IEC 61850/Function

block name

ANSI Function description Breaker

REQ650

REQ650 (A01)

3Ph/1CB/1BB

REQ650 (A11)

1Ph/1CB/1BB

REQ650 (B11)

1Ph/1CB/2BB

Control

SESRSYN 25 Synchrocheck, energizing check,

and synchronizing

0–1 1 1 1

SMBRREC 79 Autorecloser for 3–phase operation 0–1 1

STBRREC 79 Autorecloser for 1/3–phase

operation

0–1 1 1

QCBAY Bay control 1 1 1 1

LOCREM Handling of LR-switch positions 1 1 1 1

LOCREMCTRL LHMI control of Permitted Source

To Operate (PSTO)

1 1 1 1

CBC1 Circuit breaker for 1CB 1 1 1 1

SLGGIO Logic Rotating Switch for function

selection and LHMI presentation

15 15 15 15

VSGGIO Selector mini switch extension 20 20 20 20

DPGGIO IEC 61850 generic communication

I/O functions double point

16 16 16 16

SPC8GGIO Single point generic control 8

signals

5 5 5 5

AUTOBITS AutomationBits, command

function for DNP3.0

3 3 3 3

I103CMD Function commands for

IEC60870-5-103

1 1 1 1

I103IEDCMD IED commands for

IEC60870-5-103

1 1 1 1

I103USRCMD Function commands user defined

for IEC60870-5-103

4 4 4 4

I103GENCMD Function commands generic for

IEC60870-5-103

50 50 50 50

I103POSCMD IED commands with position and

select for IEC60870-5-103

50 50 50 50

Secondary system supervision

CCSRDIF 87 Current circuit supervision 0–1 1 1 1

SDDRFUF Fuse failure supervision 0–1 1 1 1

TCSSCBR Breaker close/trip circuit monitoring 3 3 3 3

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

10 ABB

IEC 61850/Function

block name

ANSI Function description Breaker

REQ650

REQ650 (A01)

3Ph/1CB/1BB

REQ650 (A11)

1Ph/1CB/1BB

REQ650 (B11)

1Ph/1CB/2BB

Logic

SMPPTRC 94 Tripping logic, common 3–phase

output

0–1 1

SPTPTRC 94 Tripping logic, phase segregated

output

0–1 1 1

TMAGGIO Trip matrix logic 12 12 12 12

OR Configurable logic blocks, OR gate 283 283 283 283

INVERTER Configurable logic blocks, Inverter

gate

140 140 140 140

PULSETIMER Configurable logic blocks, Pulse

timer

40 40 40 40

GATE Configurable logic blocks,

Controllable gate

40 40 40 40

XOR Configurable logic blocks,

exclusive OR gate

40 40 40 40

LOOPDELAY Configurable logic blocks, loop

delay

40 40 40 40

TIMERSET Configurable logic blocks, timer

function block

40 40 40 40

AND Configurable logic blocks, AND

gate

280 280 280 280

SRMEMORY Configurable logic blocks, set-

reset memory flip-flop gate

40 40 40 40

RSMEMORY Configurable logic blocks, reset-

set memory flip-flop gate

40 40 40 40

FXDSIGN Fixed signal function block 1 1 1 1

B16I Boolean 16 to Integer conversion 16 16 16 16

B16IFCVI Boolean 16 to Integer conversion

with logic node representation

16 16 16 16

IB16A Integer to Boolean 16 conversion 16 16 16 16

IB16FCVB Integer to Boolean 16 conversion

with logic node representation

16 16 16 16

Monitoring

CVMMXN Measurements 6 6 6 6

CMMXU Phase current measurement 10 10 10 10

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

ABB 11

IEC 61850/Function

block name

ANSI Function description Breaker

REQ650

REQ650 (A01)

3Ph/1CB/1BB

REQ650 (A11)

1Ph/1CB/1BB

REQ650 (B11)

1Ph/1CB/2BB

VMMXU Phase-phase voltage

measurement

6 6 6 6

CMSQI Current sequence component

measurement

6 6 6 6

VMSQI Voltage sequence measurement 6 6 6 6

VNMMXU Phase-neutral voltage

measurement

6 6 6 6

AISVBAS Function block for service values

presentation of the analog inputs

1 1 1 1

TM_P_P2 Function block for service values

presentation of primary analog

inputs 600TRM

1 1 1 1

AM_P_P4 Function block for service values

presentation of primary analog

inputs 600AIM

1 1 1 1

TM_S_P2 Function block for service values

presentation of secondary analog

inputs 600TRM

1 1 1 1

AM_S_P4 Function block for service values

presentation of secondary analog

inputs 600AIM

1 1 1 1

CNTGGIO Event counter 5 5 5 5

DRPRDRE Disturbance report 1 1 1 1

AxRADR Analog input signals 4 4 4 4

BxRBDR Binary input signals 6 6 6 6

SPGGIO IEC 61850 generic communication

I/O functions

64 64 64 64

SP16GGIO IEC 61850 generic communication

I/O functions 16 inputs

16 16 16 16

MVGGIO IEC 61850 generic communication

I/O functions

16 16 16 16

MVEXP Measured value expander block 66 66 66 66

SPVNZBAT Station battery supervision 0–1 1 1 1

SSIMG 63 Insulation gas monitoring function 0–1 1 1 1

SSIML 71 Insulation liquid monitoring function 0–1 1 1 1

SSCBR Circuit breaker condition

monitoring

0–1 1 1 1

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

12 ABB

IEC 61850/Function

block name

ANSI Function description Breaker

REQ650

REQ650 (A01)

3Ph/1CB/1BB

REQ650 (A11)

1Ph/1CB/1BB

REQ650 (B11)

1Ph/1CB/2BB

I103MEAS Measurands for IEC60870-5-103 1 1 1 1

I103MEASUSR Measurands user defined signals

for IEC60870-5-103

3 3 3 3

I103AR Function status auto-recloser for

IEC60870-5-103

1 1 1 1

I103EF Function status earth-fault for

IEC60870-5-103

1 1 1 1

I103FLTPROT Function status fault protection for

IEC60870-5-103

1 1 1 1

I103IED IED status for IEC60870-5-103 1 1 1 1

I103SUPERV Supervison status for

IEC60870-5-103

1 1 1 1

I103USRDEF Status for user defined signals for

IEC60870-5-103

20 20 20 20

Metering

PCGGIO Pulse counter logic 16 16 16 16

ETPMMTR Function for energy calculation

and demand handling

3 3 3 3

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

ABB 13

Communication

IEC 61850/Function

block name

ANSI Function description Breaker

REQ650

REQ650 (A01)

3Ph/1CB/1BB

REQ650 (A11)

1Ph/1CB/1BB

REQ650 (B11)

1Ph/1CB/2BB

Station communication

IEC61850-8-1 IEC 61850 communication

protocol

1 1 1 1

DNPGEN DNP3.0 for TCP/IP

communication protocol

1 1 1 1

RS485DNP DNP3.0 for EIA-485

communication protocol

1 1 1 1

CH1TCP DNP3.0 for TCP/IP

communication protocol

1 1 1 1

CH2TCP DNP3.0 for TCP/IP

communication protocol

1 1 1 1

CH3TCP DNP3.0 for TCP/IP

communication protocol

1 1 1 1

CH4TCP DNP3.0 for TCP/IP

communication protocol

1 1 1 1

OPTICALDNP DNP3.0 for optical serial

communication

1 1 1 1

MSTSERIAL DNP3.0 for serial

communication protocol

1 1 1 1

MST1TCP DNP3.0 for TCP/IP

communication protocol

1 1 1 1

MST2TCP DNP3.0 for TCP/IP

communication protocol

1 1 1 1

MST3TCP DNP3.0 for TCP/IP

communication protocol

1 1 1 1

MST4TCP DNP3.0 for TCP/IP

communication protocol

1 1 1 1

RS485GEN RS485 1 1 1 1

OPTICALPROT Operation selection for optical

serial

1 1 1 1

RS485PROT Operation selection for RS485 1 1 1 1

DNPFREC DNP3.0 fault records for TCP/

IP communication protocol

1 1 1 1

OPTICAL103 IEC60870-5-103 Optical serial

communication

1 1 1 1

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

14 ABB

IEC 61850/Function

block name

ANSI Function description Breaker

REQ650

REQ650 (A01)

3Ph/1CB/1BB

REQ650 (A11)

1Ph/1CB/1BB

REQ650 (B11)

1Ph/1CB/2BB

RS485103 IEC60870-5-103 serial

communication for RS485

1 1 1 1

GOOSEINTLKRCV Horizontal communication via

GOOSE for interlocking

59 59 59 59

GOOSEBINRCV GOOSE binary receive 4 4 4 4

ETHFRNT

ETHLAN1

GATEWAY

Ethernet configuration of front

port, LAN1 port and gateway

1 1 1 1

GOOSEDPRCV GOOSE function block to

receive a double point value

32 32 32 32

GOOSEINTRCV GOOSE function block to

receive an integer value

32 32 32 32

GOOSEMVRCV GOOSE function block to

receive a measurand value

16 16 16 16

GOOSESPRCV GOOSE function block to

receive a single point value

64 64 64 64

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

ABB 15

Basic IED functions

IEC 61850/Function

block name

Function description

Basic functions included in all products

INTERRSIG Self supervision with internal event list 1

SELFSUPEVLST Self supervision with internal event list 1

TIMESYNCHGEN Time synchronization 1

SNTP Time synchronization 1

DTSBEGIN, DTSEND,

TIMEZONE

Time synchronization, daylight saving 1

IRIG-B Time synchronization 1

SETGRPS Setting group handling 1

ACTVGRP Parameter setting groups 1

TESTMODE Test mode functionality 1

CHNGLCK Change lock function 1

TERMINALID IED identifiers 1

PRODINF Product information 1

SYSTEMTIME System time 1

RUNTIME IED Runtime comp 1

PRIMVAL Primary system values 1

SMAI_20_1 -

SMAI_20_12

Signal matrix for analog inputs 2

3PHSUM Summation block 3 phase 12

GBASVAL Global base values for settings 6

ATHSTAT Authority status 1

ATHCHCK Authority check 1

SPACOMMMAP SPA communication mapping 1

FTPACCS FTP access with password 1

DOSFRNT Denial of service, frame rate control for front port 1

DOSLAN1 Denial of service, frame rate control for LAN1 1

DOSSCKT Denial of service, socket flow control 1

SAFEFILECOPY Safe file copy function 1

SPATD Date and time via SPA protocol 1

BCSCONF Basic communication system 1

Breaker protection REQ650 1MRK 505 283-BEN -

Product version: 1.2

16 ABB

4. Current protection

Instantaneous phase overcurrent protection, 3-

phase output PHPIOC

The instantaneous three phase overcurrent

function has a low transient overreach and short

tripping time to allow use as a high set short-

circuit protection function.

Instantaneous phase overcurrent protection,

phase segregated output SPTPIOC

The instantaneous three phase overcurrent

function has a low transient overreach and short

tripping time to allow use as a high set short-

circuit protection function and where the

requirement for tripping is one- and/or three-

phase.

Four step phase overcurrent protection, 3-phase

output OC4PTOC

The four step phase overcurrent protection

function OC4PTOC has an inverse or definite time

delay independent for step 1 and 4 separately.

Step 2 and 3 are always definite time delayed.

All IEC and ANSI inverse time characteristics are

available.

The directional function is voltage polarized with

memory. The function can be set to be directional

or non-directional independently for each of the

steps.

A 2nd harmonic blocking can be set individually

for each step.

Four step phase overcurrent protection, phase

segregated output OC4SPTOC

The four step phase overcurrent function, phase

segregated output (OC4SPTOC) has an inverse or

definite time delay independent for each step

separately.

All IEC and ANSI time delayed characteristics are

available.

The directional function is voltage polarized with

memory. The function can be set to be directional

or non-directional independently for each of the

steps.

The tripping can be one- and/or three-phase.

Instantaneous residual overcurrent protection

EFPIOC

The Instantaneous residual overcurrent protection

EFPIOC has a low transient overreach and short

tripping times to allow the use for instantaneous

earth-fault protection, with the reach limited to

less than the typical eighty percent of the line at

minimum source impedance. EFPIOC can be

configured to measure the residual current from

the three-phase current inputs or the current from

a separate current input. EFPIOC can be blocked

by activating the input BLOCK.

Four step residual overcurrent protection, zero

sequence and negative sequence direction

EF4PTOC

The four step residual overcurrent protection,

zero or negative sequence direction (EF4PTOC)

has a settable inverse or definite time delay

independent for step 1 and 4 separately. Step 2

and 3 are always definite time delayed.

All IEC and ANSI inverse time characteristics are

available.

EF4PTOC can be set directional or non-

directional independently for each of the steps.

The directional part of the function can be set to

operate on following combinations:

• Directional current (I3PDir) versus Polarizing

voltage (U3PPol)

• Directional current (I3PDir) versus Polarizing

current (I3PPol)

• Directional current (I3PDir) versus Dual

polarizing (UPol+ZPol x IPol) where ZPol = RPol

+ jXPol

IDir, UPol and IPol can be independently selected

to be either zero sequence or negative sequence.

Second harmonic blocking restraint level can be

set for the function and can be used to block

each step individually.

Sensitive directional residual overcurrent and

power protection SDEPSDE

In isolated networks or in networks with high

impedance earthing, the earth fault current is

significantly smaller than the short circuit currents.

In addition to this, the magnitude of the fault

current is almost independent on the fault location

in the network. The protection can be selected to

Breaker protection REQ650

1MRK 505 283-BEN -

Product version: 1.2

ABB 17

use either the residual current or residual power

component 3U

·3I

·cos j, for operating quantity.

There is also available one non-directional 3I

step and one non-directional 3U

overvoltage

tripping step.

Thermal overload protection, one time constant

The increasing utilizing of the power system

closer to the thermal limits has generated a need

of a thermal overload protection also for power

lines.

A thermal overload will often not be detected by

other protection functions and the introduction of

the thermal overload protection can allow the

protected circuit to operate closer to the thermal

limits.

The three-phase current measuring protection

has an I

t characteristic with settable time

constant and a thermal memory. The temperature

is displayed in either in Celsius or in Fahrenheit

depending on whether the function used is

Thermal overload protection one time constant,

Celsius LCPTTR or Fahrenheit LFPTTR.

An alarm level gives early warning to allow

operators to take action well before the line is

tripped.

Breaker failure protection, 3-phase activation and

output

CCRBRF can be current based, contact based, or

an adaptive combination of these two conditions.

Breaker failure protection, 3-phase activation and

output (CCRBRF) ensures fast back-up tripping of

surrounding breakers in case the own breaker

fails to open. CCRBRF can be current based,

contact based, or an adaptive combination of

these two conditions.

Current check with extremely short reset time is

used as check criterion to achieve high security

against unnecessary operation.

Contact check criteria can be used where the

fault current through the breaker is small.

Breaker failure protection, 3-phase activation and

output (CCRBRF) current criteria can be fulfilled

by one or two phase currents the residual current,

or one phase current plus residual current. When

those currents exceed the user defined settings,

the function is triggered. These conditions

increase the security of the back-up trip

command.

CCRBRF function can be programmed to give a

three-phase re-trip of the own breaker to avoid

unnecessary tripping of surrounding breakers.

Breaker failure protection, phase segregated

activation and output

Breaker failure protection, phase segregated

activation and output CSPRBRF ensures fast

back-up tripping of surrounding breakers in case

of own breaker failure to open. CSPRBRF can be

current based, contact based, or adaptive

combination between these two principles.

A current check with extremely short reset time is

used as a check criterion to achieve a high

security against unnecessary operation.

A contact check criteria can be used where the

fault current through the breaker is small.

CSPRBRF function current criteria can be fulfilled

by one or two phase currents, or one phase

current plus residual current. When those currents

exceed the user defined settings, the function is

activated. These conditions increase the security

of the back-up trip command.

CSPRBRF can be programmed to give an one- or

three-phase re-trip of the own breaker to avoid

unnecessary tripping of surrounding breakers at

an incorrect initiation due to mistakes during

testing.

Stub protection STBPTOC

When a power line is taken out of service for

maintenance and the line disconnector is opened

the voltage transformers will mostly be outside on

the disconnected part. The primary line distance

protection will thus not be able to operate and

must be blocked.

The stub protection STBPTOC covers the zone

between the current transformers and the open

disconnector. The three-phase instantaneous

overcurrent function is released from a normally

open, NO (b) auxiliary contact on the line

disconnector.

Pole discordance protection CCRPLD

Circuit breakers and disconnectors can end up

with thes in different positions (close-open), due

Breaker protection REQ650

1MRK 505 283-BEN -

Product version: 1.2

18 ABB

to electrical or mechanical failures. An open

phase can cause negative and zero sequence

currents which cause thermal stress on rotating

machines and can cause unwanted operation of

zero sequence or negative sequence current

functions.

Normally the own breaker is tripped to correct

such a situation. If the situation persists the

surrounding breakers should be tripped to clear

the unsymmetrical load situation.

The pole discordance function operates based on

information from the circuit breaker logic with

additional criteria from unsymmetrical phase

currents when required.

Broken conductor check BRCPTOC

Conventional protection functions can not detect

the broken conductor condition. Broken

conductor check (BRCPTOC) function, consisting

of continuous current unsymmetrical check on the

line where the IED is connected will give alarm or

trip at detecting broken conductors.

Directional over/underpower protection

GOPPDOP/GUPPDUP

The directional over-/under-power protection

GOPPDOP/GUPPDUP can be used wherever a

high/low active, reactive or apparent power

protection or alarming is required. The functions

can alternatively be used to check the direction of

active or reactive power flow in the power system.

There are a number of applications where such

functionality is needed. Some of them are:

• detection of reversed active power flow

• detection of high reactive power flow

Each function has two steps with definite time

delay. Reset times for both steps can be set as

well.

Negative sequence based overcurrent function

DNSPTOC

Negative sequence based overcurrent function

(DNSPTOC) is typically used as sensitive earth-

fault protection of power lines, where incorrect

zero sequence polarization may result from

mutual induction between two or more parallel

lines.

Additionally, it is applied in applications on

cables, where zero sequence impedance

depends on the fault current return paths, but the

cable negative sequence impedance is practically

constant.

The directional function is current and voltage

polarized. The function can be set to forward,

reverse or non-directional independently for each

step.

DNSPTOC protects against all unbalanced faults

including phase-to-phase faults. The minimum

start current of the function must be set to above

the normal system unbalance level in order to

avoid unwanted operation.

5. Voltage protection

Two step undervoltage protection UV2PTUV

Undervoltages can occur in the power system

during faults or abnormal conditions. Two step

undervoltage protection (UV2PTUV) function can

be used to open circuit breakers to prepare for

system restoration at power outages or as long-

time delayed back-up to primary protection.

UV2PTUV has two voltage steps, where step 1 is

settable as inverse or definite time delayed. Step

2 is always definite time delayed.

Two step overvoltage protection OV2PTOV

Overvoltages may occur in the power system

during abnormal conditions such as sudden

power loss, tap changer regulating failures, open

line ends on long lines etc.

Two step overvoltage protection (OV2PTOV)

function can be used to detect open line ends,

normally then combined with a directional reactive

over-power function to supervise the system

voltage. When triggered, the function will cause

an alarm, switch in reactors, or switch out

capacitor banks.

OV2PTOV has two voltage steps, where step 1

can be set as inverse or definite time delayed.

Step 2 is always definite time delayed.

OV2PTOV has an extremely high reset ratio to

allow settings close to system service voltage.

Two step residual overvoltage protection

ROV2PTOV

Residual voltages may occur in the power system

during earth faults.

Breaker protection REQ650

1MRK 505 283-BEN -

Product version: 1.2

ABB 19

Two step residual overvoltage protection

ROV2PTOV function calculates the residual

voltage from the three-phase voltage input

transformers or measures it from a single voltage

input transformer fed from an open delta or

neutral point voltage transformer.

ROV2PTOV has two voltage steps, where step 1

can be set as inverse or definite time delayed.

Step 2 is always definite time delayed.

Loss of voltage check LOVPTUV

Loss of voltage check (LOVPTUV) is suitable for

use in networks with an automatic system

restoration function. LOVPTUV issues a three-

pole trip command to the circuit breaker, if all

three phase voltages fall below the set value for a

time longer than the set time and the circuit

breaker remains closed.

6. Frequency protection

Underfrequency protection SAPTUF

Underfrequency occurs as a result of a lack of

sufficient generation in the network.

Underfrequency protection SAPTUF is used for

load shedding systems, remedial action schemes,

gas turbine startup and so on.

SAPTUF is also provided with undervoltage

blocking.

Overfrequency protection SAPTOF

Overfrequency protection function SAPTOF is

applicable in all situations, where reliable

detection of high fundamental power system

frequency is needed.

Overfrequency occurs because of sudden load

drops or shunt faults in the power network. Close

to the generating plant, generator governor

problems can also cause over frequency.

SAPTOF is used mainly for generation shedding

and remedial action schemes. It is also used as a

frequency stage initiating load restoring.

SAPTOF is provided with an undervoltage

blocking.

Rate-of-change frequency protection SAPFRC

Rate-of-change frequency protection function

(SAPFRC) gives an early indication of a main

disturbance in the system. SAPFRC can be used

for generation shedding, load shedding and

remedial action schemes. SAPFRC can

discriminate between positive or negative change

of frequency.

SAPFRC is provided with an undervoltage

blocking.

7. Secondary system supervision

Current circuit supervision CCSRDIF

Open or short circuited current transformer cores

can cause unwanted operation of many

protection functions such as differential, earth-

fault current and negative-sequence current

functions.

It must be remembered that a blocking of

protection functions at an occurrence of open CT

circuit will mean that the situation will remain and

extremely high voltages will stress the secondary

circuit.

Current circuit supervision (CCSRDIF) compares

the residual current from a three phase set of

current transformer cores with the neutral point

current on a separate input taken from another

set of cores on the current transformer.

A detection of a difference indicates a fault in the

circuit and is used as alarm or to block protection

functions expected to give unwanted tripping.

Fuse failure supervision SDDRFUF

The aim of the fuse failure supervision function

(SDDRFUF) is to block voltage measuring

functions at failures in the secondary circuits

between the voltage transformer and the IED in

order to avoid unwanted operations that

otherwise might occur.

The fuse failure supervision function basically has

three different algorithms, negative sequence and

zero sequence based algorithms and an

additional delta voltage and delta current

algorithm.

The negative sequence detection algorithm is

recommended for IEDs used in isolated or high-

impedance earthed networks. It is based on the

negative-sequence measuring quantities, a high

value of negative sequence voltage 3U

without

Breaker protection REQ650

1MRK 505 283-BEN -

Product version: 1.2

20 ABB

Page is loading ...

ABB Relion REQ650 User manual

Brand: ABB

Model: Relion REQ650

Category: Measuring, testing & control

Type: User manual

Download PDF

report

ABB Relion REQ650 User manual

ABB Relion REQ650 User manual

Related papers

Other documents