Pyronix MX-PROX Operating instructions

Brand: Pyronix

Model: MX-PROX

Type: Operating instructions

MX-PROX

™

INSTRUCTIONS

The MX-PROX is a unique card reader designed to work exclusively with the Pyronix range of Matrix

control panels. Arm

Modes A, B, C and D, or Partitions 1, 2, 3 and 4, may be armed or disarmed depending on how the MX-PCARD

™

MX-TAG

™

has been programmed:

• A card or tag allocated to one partition will arm or disarm Arm Modes A, B, C and D

• A card or tag allocated to multiple partitions will arm or disarm Partitions 1, 2, 3 and 4

By presenting a card or tag to the MX-PROX reader, the reader will arm or disarm the panel in the same way as entering

an allocated user code at a remote keypad.

(Each card or tag must be allocated a user code which has been programmed into the control panel).

OPERATION

1. Present the card or tag to the MX-PROX. The card or tag must be within 3cm of the MX-PROX for it to be recognised.

3cm

2. Present the card or tag for 1, 2, 3 or 4 seconds. This period of time represents the Arm Mode or Partition that is to be

armed or disarmed.

3. After waiting for the required time, remove the card or tag, and wait for the confirmation tone. The time taken for the

confirmation tone to sound depends on the entry/exit time programmed into the control panel.

Key

Arm Mode A / Partition 1

Arm Mode B / Partition 2

Arm Mode D / Partition 4

RINS539-2

MX-PROX Instructions

Page 2 RINS539-2

ADDRESSING THE MX-PROX

Individual readers are recognised by the link settings on the PCB on the back of each reader.

I D 4

I D 5 I D 6

K+ K+

K+

K-

ID0 ID0

ID0

ID1 ID1

ID1

ID2

PC out PC out

PC out

K+

KD KD

K- K-

K-

ID0 ID0

ID0

ID1

ID2 ID2

ID2

PC out

I D 1

I D 2 I D 3

NOTE: PC Out – see page 51 in the Full System Manual for more details.

TECHNICAL SPECIFICATIONS

Power Supply

Voltage: 12V DC typical (9 – 15V DC range)

Current: 90mA max @ 13.8V DC

Mechanical

Dimensions: 84mm x 84mm x 21mm

Case Material: Polycarbonate

Environmental

Operating Temperature: -10°C to 50°C (14°F to 122°F)

Storage Temperature: -20°C to 60°C (-4°F to 140°F)

Warranty

This product is sold subject to our standard warranty conditions and is warranted against defects in workmanship for a

period of 2 years. In the interests of continuing improvement of quality, customer care and design, Pyronix Ltd. reserves

the right to amend specifications without giving prior notice.

Pyronix Ltd.

Pyronix House

Braithwell Way

Hellaby, Rotherham

S66 8QY, UK

Customer Support (UK only): 0870 122 3360

This is a national rate line.

Opening hours: 08:30 AM – 05:00 PM, Monday to Friday

Email: customer.support@pyronix.com

Website: www.pyronix.com

www.matrixpanel.com

www.dd243.com

Pyronix MX-PROX Operating instructions

Pyronix MX-PROX Operating instructions

Pyronix MX-PROX Operating instructions

Related papers

Other documents