BDI Corridor 6529 User manual

Type
User manual

BDI Corridor 6529 is a credenza designed for office use. It features a glass panel, steel parts, and wood veneer. The credenza has a cabinet with a door and drawers, and it can be assembled with either forward-facing or side-facing file bars. The credenza comes with matching locks, and it can be used with a unique lock and key replacement kit.

BDI Corridor 6529 is a credenza designed for office use. It features a glass panel, steel parts, and wood veneer. The credenza has a cabinet with a door and drawers, and it can be assembled with either forward-facing or side-facing file bars. The credenza comes with matching locks, and it can be used with a unique lock and key replacement kit.

1
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today and you will be entered to win free a BINK
table from BDI. www.bdiusa.com/product-registration/
Placement and Maintenance
Corridor
®
Office furniture is designed for indoor use on level floors.
Clean glass with glass cleaner, and steel parts and wood veneer with a
moist cloth.
Your Corridor
®
Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
Do not use power tools for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at customerservice@
bdiusa.com. For all other concerns, please contact your BDI retailer.
bdiusa.com
customerservice@bdiusa.com
C1 Glass Panel x 1
A1 Cabinet x 1
C7 Base Stretcher x 2
T1 4mm Hex Wrench
C6 File Bar Clip x 4
C2 Pull x 4
C4 Small File Bar x 2
C5 Large File Bar x 1
H4 Bumper x 6
C3 Right Leg x 1
H3 1/4-20 x 63mm
Machine Screw x 6
H2 M4 x 37mm Machine
Screw x 8
H1 1/4-20 x 12mm
Machine Screw x 16
C8 Left Leg x 1
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Corridor & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2015, BDI
Made in China. 02.05.2016 V2
CORRIDOR
TM
6529
CREDENZA
Tool Required:
Phillips screwdriver
bdiusa.com
customerservice@bdiusa.com
CORRIDOR 6529
CREDENZA
2
Step 2 - Build Base Assembly
Slide Left Leg C8 and Right Leg C3 into Base Stretcher C7 and attach by using Hex Wrench and Screw
H1.
Step 3 - Attach Leg Assembly to Cabinet using Screws H1 and H3 and tighten with Hex Wrench.
C8
C3
C7
C7
Æ
Æ
Æ
Æ
H1 (x8)
H3 (x6)
H1
H3
H1 (x8)
bdiusa.com
customerservice@bdiusa.com
CORRIDOR 6529
CREDENZA
3
Step 4 - Install Bumpers H4 in locations shown below onto the top of cabinet. Carefully position Glass Panel
flush with the edges of cabinet.
Step 5 - Attach Pulls C2 to cabinet door and drawers using Screws H2 and tighten with a Phillips screwdriver.
H4 (x6)
C2
C1
H2 (x8)
bdiusa.com
customerservice@bdiusa.com
CORRIDOR 6529
CREDENZA
4
C4
C4
Inner Notch
(Legal File)
Outer Notch
(Letter File)
Step 8 - File Bar Installation (Option B)
For files facing sideways, attach File Bar Clip C6 to both ends of Large File Bar C5 as shown. Place the
file bar assembly in the notches located on the left and right drawer side panels. For side facing legal files, skip
this step altogether.
C5
C6
C6
Step 7 - File Bar Installation (Option A)
For files facing forward, attach File Bar Clip C6 to both ends of Small File Bar C4 as shown.
For letter files, use the outer notches on the front and back of the drawer. For legal files, use the inner notches.
bdiusa.com
customerservice@bdiusa.com
CORRIDOR 6529
CREDENZA
5
Corridor lateral file cabinets are pre-assembled with matching locks. If you require unique locks for your home
or office use, please contact BDI Customer Service at [email protected] to purchase a unique lock
and key replacement kit which includes a lock assembly and two keys. To replace the lock please follow the
instructions below.
Optional - Lock Removal and Installation
1. Open the drawer which houses the lock.
2. Using a Phillip’s screw driver, loosen the 2 screws that secure the lock assembly to the back of the drawer
facia panel.
3. Replace it with the new lock assembly and re-tighten the 2 screws.
Tool Required:
Phillips screwdriver
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

BDI Corridor 6529 User manual

Type
User manual

BDI Corridor 6529 is a credenza designed for office use. It features a glass panel, steel parts, and wood veneer. The credenza has a cabinet with a door and drawers, and it can be assembled with either forward-facing or side-facing file bars. The credenza comes with matching locks, and it can be used with a unique lock and key replacement kit.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI