2. Nucraft
  3. Tavola™

Nucraft Tavola™ Installation guide

  • Hello! I've reviewed the installation instructions for the Tavola Standing Height Table and Tavola Credenza. I understand the document covers the assembly process, required tools, and specific steps for setting the glass top. I'm ready to help with any questions you have about the installation.
  • How many people are needed for assembly?
    What tools are required for assembly?
    What should be done after locating credenza in its final position?
Tavola Standing Height and Credenza
Installation Instructions
ID:
Before Beginning Installation
•Read through the entire instruction thoroughly
•A minimum of 2 persons is required for this assembly
•These instructions reflect typical assemblies. They may not match your specific configuration.
Required Tools
•Level
•PODS for glass handling
Tavola Standing Height Table
Tavola Standing Height Exploded
1. Frame
2. Side Panels
3. Top
2
3
1
Tavola Credenza
Tavola Credenza Exploded
1. Frame
2. Side Panels
3. Top
4. Case
2
3
1
4
Setting Glass
•Locate credenza in it’s final position
•Level
•Remove cardboard spacers.
•Using suction pods, set the top glass in place.
/