Page 8
PRODUCT MANUAL 360 Personal Bodyguard : SB-PA250
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
LOOP ALARM
Connect the other end of this cable to the port on
the bottom of the alarm.
TEST. Open the door. e cable will “break” at
yellow connector OR the connection at the alarm.
During this test, to protect your ears, you should
NOT have the alarm ON.
If the loop does not break, or the object moves,
select a sturdier object to loop around. Your
suitcase may also work for you.
Replace the connections.
Turn on the alarm.
Your alarm is now active. When the loop is broken,
as noted above, the alarm will sound loudly.
To end the alarm, slide the switch to the EXPEL
position.
You can NOT turn o the alarm by re-connecting
the loop. You must slide the switch to EXPEL.
e loop alarm can be used in number of ways; to protect goods from being stolen, to
notify you that something is being removed, etc.