2. Extron
  3. TLP Pro 725C

Extron TLP Pro 725C Template

  • Hello! I am an AI chatbot trained to assist you with the Extron TLP Pro 725C Template. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Cut-Out Template for the Extron
TLP Pro 725C
1. Confirm the product to be installed.
2. Double-check the print settings,
before printing, and make sure
the page is not scaled.
3. Remove the surface cut-out area
(gray) from the template by cutting
along the red line.
DO NOT CUT the gray dotted line.
4. Measure the cutout and template.
Make sure the dimensions are the
same as those shown.
5. Place the template and mark the
position on the mounting surface
where the TLP Pro 725C is being
installed.
6. Double check position and
dimensions, then cut the opening
in the table.
68-3316-01 Rev. A
09 18
TLP Pro 725C outer rim (Do not cut this line.)
9.44" (240 mm) W x 8.29" (211 mm) D
Page size: 11" x 17"
Print scale 1:1
Do not shrink.
User Access
User Access
7.10"
(180 mm)
8.90"
(226 mm)
+ 0.00" (0.00 cm)
- 0.02" (0.05 cm)
SURFACE
CUT-OUT
AREA
/