Extron TLP 1000MV Template

Cut-Out Template for the Extron

TLP 1000MV

Outer Edge of Front Bezel

(Do not cut this line.)

1. Confirm the product to be installed.

2. Remove the surface cut-out area

(gray) from the template.

3. Mark the position on the wall or

furniture where the TLP 1000MV

is being installed.

4. Cut the opening.

Mounting Holes (4)

P/N 68-2046-01 Rev. B

SURFACE

CUT-OUT

AREA

10.060"

(25.55 cm)

6.980"

(17.73 cm)

Page size: 11" x 17"

Print scale 1:1

Do not shrink.

5.25"

(13.34 cm)

0.865"

(2.20 cm)

10.432"

(26.50 cm)

0.186"

(0.47 cm)