Extron MLM-WB+ User manual

Extron
Brand
Extron
Model
MLM-WB+
Type
User manual

This manual is also suitable for

1
68-1236-01
Rev. B
08 07
Adjusting the Door Lock
By default, the key to the door lock cannot be removed when the door is unlocked.
To adjust the lock so that the key can be removed at any time,
1. Remove the nut, washer, and cam, and set them aside.
2. Remove the stop washer, flip it over, and then thread it back onto the screw.
3. Replace the cam, washer, and nut, and tighten them securely.
Flip
Nut
Washer
Cam
Flipping the stop washer to adjust the door lock
Ordering Additional or Replacement Keys
In an effort to save our dealers time and expense, Extron directs all requests
for replacement keys to our supplier, McMaster-Carr. Extron does not provide
additional or replacement keys.
N
Be sure to write down the MLM-WB+ serial number and the key number found
on the key itself. Save these numbers in a safe place; you will need them to order
additional or replacements keys. Different MLM-WB+ wall boxes may have
differently numbered keys.
Write these numbers below for easy access:
MLM-WB+ serial number: Key number:
If you require additional or replacement keys for your MLM-WB+, you must
purchase them through McMaster-Carr directly. To do so,
1. Call McMaster-Carr customer service at 330-342-6100, or visit their Web site
at www.mcmaster.com.
2. Provide the sales representative with item part #1682A41.
3. Specify the unique key number inscribed on your key and the required
quantity.
MLM-WB+
MediaLink™ Wall Box Mounting Option
Lock and Key Guide
MLM-WB+ Lock and Key Guide
2
You can also purchase a master key, which can be used on any MLM-WB+, through
McMaster-Carr. (You may want this key if you own multiple units and would like
to use one key with all of them.) Provide the McMaster-Carr sales representative
with the part #1682A15 and the key #Y18A.
Lock Dimensions
If you need to replace the lock, see the illustration and table below for the required
cam lock dimensions.
Cam
Length
Head
Dia.
Mounting Hole Dia.
Offset
Cam
Maximum
Latching
Distance
Circular keyway cam lock diagram
N The maximum latching distance is the distance between the outside mounting
surface and the inside face of the cam.
Cam length
1 1/8"
Head diameter
7/8"
Mounting hole diameter
3/4"
Cam offset
1/4"
Maximum door/drawer thickness
15/64"
Maximum latching distance
31/32"
Lock and Key Guide, cont’d
  • Page 1 1
  • Page 2 2

Extron MLM-WB+ User manual

Extron
Brand
Extron
Model
MLM-WB+
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents