201305. 750. A1
Quick Start Guide
Fixed Network Camera
Quick Start Guide
Package Contents
The Camera
A
Camera Stand
Fixed Lens
Screws Pack
B C
D
E
F
Quick Start
Guide
Product CD
screws
Quick Start Guide
1
Power Adapter
G
Quick Start Guide
Physical Description & Connection
Microphone
Light Sensor
LED Indicator
55.0
66.0
65.5
DC-12V
AC-24V
RJ-45
Terminal Block
Focus
Assist
Button
Micro SD
DC IRIS
MIC in
Audio
Out
Video
Out
Reset
2
Connections
1. Dene the type of network device.
2. If the network device supports PoE (Power over Ethernet) function, simply connect the camera to it via
Ethernet cable.
3. If not, the connections to the network device (via Ethernet cable) and AC or DC adapter are required.
mm
mm
mm
Quick Start Guide
Assigning IP address
1. Launch Discovery Tool (Discovery.exe). The tool will start searching and the
n displaying the cameras
on the Device List after they are found.
2. Check the checkbox to select a camera device from the list.
3. The IP Camera may be assigned with a valid IP address via DHCP server. It can be also manually given a static
IP address. To do so, click on “Set IP”, and then input the IP, Subnet Mask and Gateway. Input account info if
the camera is password protected. (Default ID/Password: admin/1234)
4. Click on the “Browse” button to get access to the camera web page immediately.
3
Quick Start Guide
4
Accessing the camera
1. Launch IE browser and input the IP address of the camera, or click on “Browse” button on Discovery Tool. The
web page with video will then be shown as below. (Default ID/Password: admin/1234)
2. The live video of the camera can be played with a RTSP player, such as VLC or QuickTime. The network URL
is rtsp://Camera IP/stream1. The example given below is that live video is displayed with QuickTime player.
Quick Start Guide
5
Cable Management
A considerate design of groove located on the sides. Users can arrange the DC-Iris cable neatly.
Quick Start Guide
Focus Assist Button
Focus Assist Button allows users to adjust the camera focus with precision by a simple click.
Flashing Green → Steady Amber
Step 1: "Press" Focus Assist Button
● Rotate the lens focus clockwise or anticlockwise to either end (N or ∞).
● Press and hold the button for 3 seconds until LED indicator ashes from Green light to Amber light.
Step 2: Adjust Focus
● Keep the camera pointing to the same scene during the tuning process .
● Start tuning the focus in order to turn the LED Green.
● If LED displays Red light, it indicates the opposite turning direction.
focus controller
Step 3: Get the Best Focus Value
● When camera gets correct focus, the LED will become Green flashing.
● Remain the camera's pointing direction until the LED becomes steady Green.
6
Focus
Assist
Button
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/