Beghelli CASTEX 700 (HZ-CAS700) Installation guide

Beghelli
Brand
Beghelli
Model
CASTEX 700 (HZ-CAS700)
Type
Installation guide

Beghelli CASTEX 700 (HZ-CAS700) is a versatile and durable lighting fixture suitable for various indoor applications. It features multiple mounting options, including end bracket, pendant mount with/without wires, allowing for flexible installation in different environments. The fixture provides reliable illumination with its high-quality LED technology, ensuring energy efficiency and long-lasting performance. The CASTEX 700 is designed for both residential and commercial use, offering a modern and stylish lighting solution for various spaces.

Beghelli CASTEX 700 (HZ-CAS700) is a versatile and durable lighting fixture suitable for various indoor applications. It features multiple mounting options, including end bracket, pendant mount with/without wires, allowing for flexible installation in different environments. The fixture provides reliable illumination with its high-quality LED technology, ensuring energy efficiency and long-lasting performance. The CASTEX 700 is designed for both residential and commercial use, offering a modern and stylish lighting solution for various spaces.

CASTEX 700
Page 1 of 5
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
04/21/22
When using electrical equipment, basic safety precautions should always be followed including:
1. Disconnect power before performing work on electrical equipment.
2. Do not mount near gas or electric heaters.
3. Equipment should be mounted in locations and at heights where it will not be subjected to
tampering.
4. The use of accessory equipment not recommended by Beghelli Inc., may cause an unsafe
condition, and will void the unit’s warranty.
5. Do not use this equipment for other than its intended purpose.
6. Servicing of this equipment should be performed by a qualied service personnel.
7. Suitable for non-insulated surface and frame. DO NOT cover xture with insulation liner or
similar material.
8. DO NOT install in unstable, loose or breakable surfaces.
9. DO NOT let objects impact or exert force on the surface of the xture.
10. SAVE THESE INSTRUCTIONS!
Fixtures must be wired in accordance with National electrical code and all applicable local codes.
Proper grounding is required for safety.
This product must be installed in accordance with the applicable installation code by a qualied
electrician who is familiar with the construction and operation of the product and the hazards
involved.
IMPORTANT SAFEGUARDS
Read & Follow All Safety Instructions
INSTALLATION INSTRUCTIONS
CASTEX 700
Page 2 of 5
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
04/21/22
WARNING
Risk of fire, electric shock or personal injury
Before installation, turn off power!
INSTALLATION STEPS (Initial Set-up For All Mounting Types)
1. Undo the plug screw and take out the green cable
(grounding), red cable (L-220V), white cable (Null)
and black cable (L-120V).
2. Drill two 8mm holes for expanded screws 132mm
apart.
3. Connect the green to the grounding cable, white to
null cable, black to 120V Live cable, and red to 220V
Live cable.
4. Install the two expanded screw to the holes (shown
above). Attach pole for pendant mount (optional).
CASTEX 700
Page 3 of 5
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
04/21/22
WARNING
Risk of fire, electric shock or personal injury
Before installation, turn off power!
INSTALLATION STEPS (End Bracket Mount)
1. Tighten the mounting arm to the xture. 2. Tighten the skid-proof screw (as shown above).
3. Drill two Ø10mm holes into chosen surface for
mounting arm.
4. Connect the AC cables; black cable to L, white
cable to N, green cable to grounding.
CASTEX 700
Page 4 of 5
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
04/21/22
WARNING
Risk of fire, electric shock or personal injury
Before installation, turn off power!
INSTALLATION STEPS (Pendant Mount with Wires)
1. Attach wires to the xture. 2. Thread the AC cable through the pendant pole.
3. Drill two Ø10mm holes for the metal wires into
chosen surface and tighten the skid-proof screw.
4. Install the xture to junction box. Connect the AC
cable; black cable to L, white cable to N, green
cable to grounding.
CASTEX 700
Page 5 of 5
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
04/21/22
WARNING
Risk of fire, electric shock or personal injury
Before installation, turn off power!
INSTALLATION STEPS (Pendant Mount without Wires)
1. Thread the AC cable through the pendant pole. 2. Tighten the pole as shown above.
3. Fix the skid-proof screw as shown above. 4. Install the xture to junction box. Connect the AC
cable; black cable to L, white cable to N, green
cable to grounding.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Beghelli CASTEX 700 (HZ-CAS700) Installation guide

Beghelli
Brand
Beghelli
Model
CASTEX 700 (HZ-CAS700)
Type
Installation guide

Beghelli CASTEX 700 (HZ-CAS700) is a versatile and durable lighting fixture suitable for various indoor applications. It features multiple mounting options, including end bracket, pendant mount with/without wires, allowing for flexible installation in different environments. The fixture provides reliable illumination with its high-quality LED technology, ensuring energy efficiency and long-lasting performance. The CASTEX 700 is designed for both residential and commercial use, offering a modern and stylish lighting solution for various spaces.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers