Beghelli CASTEX 100 (HZCAS100) Installation guide

Beghelli
Brand
Beghelli
Model
CASTEX 100 (HZCAS100)
Type
Installation guide
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
Page 1 of 2
11/29/23
1. Risk of fire or electric shock. High bay light installation requires knowledge of luminaires and electrical system. If not qualified, DO
NOT try to install. Please contact an electrician.
2. Risk of fire or electric shock. Suitable for wet locations. Make sure the power is off prior to installation.
3. Risk of fire or electric shock. Suitable for non-insulated surface and frame. DO NOT cover fixture with installation liner or similar
material.
4. DO NOT install in unstable, loose or breakable surfaces.
5. DO NOT let objects impact or exert force on the surface of the fixture.
CASTEX 100
INSTALLATION INSTRUCTIONS
Surface Ceiling Mount
WARNING
Risk of fire, electric shock or personal injury.
Before installation, turn off power!
IMPORTANT SAFEGUARDS
READ INSTRUCTIONS CAREFULLY BEFORE INSTALLING. SAVE THESE INSTRUCTIONS.
Fixtures must be wired in accordance with National electrical code and all applicable local codes. Proper grounding is required for
safety.
This product must be installed in accordance with the applicable installation code by a qualified electrician who is familiar with
the construction and operation of the product and the hazards involved.
WARNING!
DIM
+
DIM
-
5.7
"
2 @ 5/16"
OD
1.Drill 2x holes (5/16" OD) as shown 2.Make electrical connections (black=live, white=null,
green= ground)
3. Attach the luminaire to the ceiling with expansion
screws and tighten nut to bolts
4.Turn on power to test luminaire
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
Page 2 of 2
11/29/23
CASTEX 100
INSTALLATION INSTRUCTIONS
DIM
+
DIM
-
Stem Mount
DIM
+
DIM
-
Wall Mount
1. Remove fixture from carton
5.7
"
2 @ 5/16"
OD
2. Drill 2x holes (5/16" OD) as shown and install
expansion screw inserts into wall
3. Make electrical connections (black=live,
white=null, green= ground)
3. Attach the luminaire to the wall and tighten
nut to bolts. Turn on power to test luminaire.
1. Remove fixture from carton 2. Install 3/4 NPT stem to ceiling receptacle
3. Make electrical connections (black=live,
white=null, green= ground)
4. Attach luminaire to stem and tighten.
Turn on power to test luminaire.
  • Page 1 1
  • Page 2 2

Beghelli CASTEX 100 (HZCAS100) Installation guide

Beghelli
Brand
Beghelli
Model
CASTEX 100 (HZCAS100)
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers