Beghelli CASTEX 310 Installation guide

CASTEX 310
Beghelli
Brand
Beghelli
Model
CASTEX 310
Category
Wall & ceiling mounts accessories
Type
Installation guide

Beghelli CASTEX 310 is a versatile and durable lighting solution designed for various indoor applications. It offers multiple mounting options, including ceiling, wall, and pendant, making it suitable for a wide range of spaces. The fixture is equipped with flexible metal conduit for easy installation and features emergency power (Em-L and Em-N) for reliable illumination during power outages. Ensure proper grounding for safety, and refer to the instruction manual for detailed installation steps.

Beghelli CASTEX 310 is a versatile and durable lighting solution designed for various indoor applications. It offers multiple mounting options, including ceiling, wall, and pendant, making it suitable for a wide range of spaces. The fixture is equipped with flexible metal conduit for easy installation and features emergency power (Em-L and Em-N) for reliable illumination during power outages. Ensure proper grounding for safety, and refer to the instruction manual for detailed installation steps.

CASTEX 310
Page 1 of 4
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
04/21/22
When using electrical equipment, basic safety precautions should always be followed including:
1. Disconnect power before performing work on electrical equipment.
2. Do not mount near gas or electric heaters.
3. Equipment should be mounted in locations and at heights where it will not be subjected to
tampering.
4. The use of accessory equipment not recommended by Beghelli Inc., may cause an unsafe
condition, and will void the unit’s warranty.
5. Do not use this equipment for other than its intended purpose.
6. Servicing of this equipment should be performed by a qualied service personnel.
7. Suitable for non-insulated surface and frame. DO NOT cover xture with insulation liner or
similar material.
8. DO NOT install in unstable, loose or breakable surfaces.
9. DO NOT let objects impact or exert force on the surface of the xture.
10. SAVE THESE INSTRUCTIONS!
Fixtures must be wired in accordance with National electrical code and all applicable local codes.
Proper grounding is required for safety.
This product must be installed in accordance with the applicable installation code by a qualied
electrician who is familiar with the construction and operation of the product and the hazards
involved.
IMPORTANT SAFEGUARDS
Read & Follow All Safety Instructions
INSTALLATION INSTRUCTIONS
CASTEX 310
Page 2 of 4
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
04/21/22
WARNING
Risk of fire, electric shock or personal injury
Before installation, turn off power!
INSTALLATION STEPS (Ceiling Mount)
1. Take the xture and accessory out of packaging.
Then tighten both angle holder screws as shown
above.
2. Install the exible metal conduit and tighten it to the
xture.
3. Drill two holes in ceiling (as shown above) at a
75~125mm distance apart. Use ø10~12 expansion
screws to ax the bracket on the ceiling.
4. Connect the AC cable; emergency power (Em-L)
to the black wire, emergency power (Em-N) to the
white wire, L to the brown wire, N to the blue wire,
grounding to the green wire.
2-Fixing Screw
Flexible metal conduit
ø10~12
75
125
Em-L Em-N
CASTEX 310
Page 3 of 4
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
04/21/22
1. Take the xture and accessory out of packaging.
Then tighten both angle holder screws as shown
above.
2. Install the exible metal conduit and tighten it to the
xture.
3. Drill two holes in surface (as shown above) at a
91~140mm distance apart. Use ø10 expansion
screws to ax the bracket on the surface.
4. Connect the AC cable; emergency power (Em-L)
to the black wire, emergency power (Em-N) to the
white wire, L to the brown wire, N to the blue wire,
grounding to the green wire.
2-Fixing Screw
Flexible metal conduit
140
90
WARNING
Risk of fire, electric shock or personal injury
Before installation, turn off power!
INSTALLATION STEPS (Wall Mount)
CASTEX 310
Page 4 of 4
Beghelli U.S.A., 3810 Executive Way, Miramar, Florida, Tel: (954) 442-6600
04/21/22
1. Take the xture and pole accessory out of
packaging. Then screw pole into luminaire as shown
above.
2. Connect the AC cable; black cable to Em-L, white
cable to Em-N, brown cable to L, blue cable to N,
and green cable to grounding.
3. Install the mounting box to the wall or ceiling as
shown above. Screw the pole into the mounting box
and adjust the chain support as needed.
4. OR, install luminaire to standing pole after
connecting the AC cable.
WARNING
Risk of fire, electric shock or personal injury
Before installation, turn off power!
INSTALLATION STEPS (Pendant Mount)
Chain Support
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Beghelli CASTEX 310 Installation guide

CASTEX 310
Beghelli
Brand
Beghelli
Model
CASTEX 310
Category
Wall & ceiling mounts accessories
Type
Installation guide

Beghelli CASTEX 310 is a versatile and durable lighting solution designed for various indoor applications. It offers multiple mounting options, including ceiling, wall, and pendant, making it suitable for a wide range of spaces. The fixture is equipped with flexible metal conduit for easy installation and features emergency power (Em-L and Em-N) for reliable illumination during power outages. Ensure proper grounding for safety, and refer to the instruction manual for detailed installation steps.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers