LIGHT MY BRICKS 75290 Operating instructions

Type
Operating instructions
INSTALLATION GUIDE 1MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE
Light My Bricks LEGO® Mos Eisley Cantina
75290 Light Kit Installation
Guide
INSTALLATION GUIDE 2MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE
Hi There, we’re Light My Bricks!
We’re here to help you get started on
the LEGO® Mos Eisley Cantina™ (75290)
Lighting Kit.
This PDF details the instructions for the
LED light kit only. If you are wishing to
purchase this LED Lighting Kit , please
click here to view the product page.
If you run into any issues, please refer
to the troubleshooting section towards
the end of this guide.
Have fun and enjoy!
PACKAGE CONTENTS
PACKAGE CONTENTS:
15 x White 30cm Bit Lights
12 x White 15cm Bit Lights
1 x Flashing White 15cm Bit Lights
3 x White Strip Lights
1 x Light My Bricks Blue Lightsaber
1 x 2-Port Expansion Board
7 x 6-Port Expansion Board
1 x 8-Port Expansion Board
2 x 5cm Connecting Cables
2 x 15cm Connecting Cables
5 x 30cm Connecting Cables
2 x 50cm Connecting Cables
1 x USB Power Cable
12 x Adhesive Squares
LEGO PIECES:
6 × White Round Plate 1x1 w Open Stud
4 × Black Round Plate 1x1 w Open Stud
 4×BlackPlate1x1ModiedwHandle
3 × Arm Skeleton, Bent with Clips at 90
degrees (Any Colour)
1 × Black Tile w Clip Round Edges
3 × Trans Black Tile 1x2
2 × Trans Clear Round Plate 1x1
1 × Trans Clear Plate 2x2 w Rounded Bottom
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3
Contents 4. Before You Begin
8. Instructions
51. Final Product
52. Troubleshooting
57. Contact
CONTENTS
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can t in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTING CABLE CONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t t easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.
Before You Begin
BEFORE YOU BEGIN
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5
CONNECTING CABLE CONNECTORS
TO STRIP LIGHTS
Take extra care when inserting
connectors to ports on the Strip
Lights. Connectors can be inserted
only one way. With the Strip Light
facing up, ensure the side of the
connector with the wires exposed is
facing down. If a plug won’t t easily
into a port connector, don’t force it.
Doing so will damage the plug and
the connector.
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the
micro connectors to micro ports of
Micro Expansion Boards. Connecting
Micro Bit Lights to Micro Expansion
Boards is similar to connecting lights
and cables to Strip Lights. With the
expansion board facing up, ensure the
side of the connector with the wires
exposed is facing down. If a plug won’t
t easily into a port connector, do not
force it. Use your ngernail to push
the plastic part of the connector to the
micro port.
Before You Begin
BEFORE YOU BEGIN
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6
INSTALLING BIT LIGHTS UNDER
LEGO® BRICKS AND PLATES
When installing Bit Lights under
LEGO® pieces, ensure they are placed
the correct way up (Yellow LED
component exposed). You can either
place them directly on top of LEGO®
studs or in between.
Before You Begin
BEFORE YOU BEGIN
INSTALLATION GUIDE 7MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE
Instructions To ensure a smooth
installation of your light kit,
please read and follow each
step carefully.
If you run into any issues,
please refer to the online
troubleshooting guide.
STEPS
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
1
2
STEPS
White 15cm Bit Light White 15cm Bit Light
Black Round Plate 1x1 w Open Stud
Black Plate Modied w Handle
Arm Skeleton, Bent with Clips at 90 degrees
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
5
STEPS
2-Port Expansion Board
3
8-Port Expansion Board
15cm Connecting Cable
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 10
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
5
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 11
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
6
White Round Plate 1x1w Open Stud
7
White 30cm Bit Light
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 12
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
8
STEPS
White 30cm Bit Light
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 13
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
9
STEPS
10
Trans Clear Round Plate 1x1
USB Power Cable
Connect USB Power
Cable to a USB Power
Bank or Wall Adaptor
(each sold separately)
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 14
11
STEPS
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
Black Round Plate 1x1 w Open Stud
Black Plate Modied w Handle
Black Tile 1x1 w Clip Round Edges White 30cm Bit Light
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 15
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
12
STEPS
11
30cm Connecting Cable
Adhesive Squares x 2
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 16
13
STEPS
6-Port Expansion Board
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 17
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
14
STEPS
White 15cm Bit Light
15
x 2
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 18
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
16
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 19
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
17
White Round Plate 1x1w Open Stud
White 30cm Bit Light
MOS EISLEY CANTINA 75290 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 20STEPS
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
18
White 30cm Bit Light
White Round Plate 1x1w Open Stud
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58

LIGHT MY BRICKS 75290 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI