LIGHT MY BRICKS 75192 Operating instructions
- Type
- Operating instructions
INSTALLATION GUIDE 1UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE
Light My Bricks LEGO UCS Millennium
Falcon 75192 Light Kit
Installation Guide
INSTALLATION GUIDE 2UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE
Hello, we’re Light My Bricks.
We’re here to help you get started on
the LEGO UCS Millennium Falcon
(75192) Lighting Kit.
This PDF lists instructions for the
LED light kit only. If you are wishing
to purchase the Light My Bricks UCS
Millennium Falcon (75192) LED Lighting
Kit, please click here to view the product
page.
If you run into any issues, please refer
to the troubleshooting section towards
the end of this guide.
Have fun and enjoy!
PACAKAGE CONTENTS
PACKAGE CONTENTS:
10 x White 30cm Bit Lights
8 x Red 30cm Bit Lights
2 x Blue 30cm Bit Lights
2 x Flashing White 30cm Bit Lights
6 x White Strip Lights
5 x 6-Port Expansion Boards
1 x 12-Port Expansion Board
1 x Multi Effects Board
8 x 5cm Connecting Cables
4 x 30cm Connecting Cables
8 x Adhesive Squares
1 x USB Power Cable
LEGO PIECES:
1 × Trans Clear Round Plate 1×1
10 × Trans Red Round Plate 1x1
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 4
LAYING CABLES IN BETWEEN
AND UNDERNEATH BRICKS
Cables can t in between and
underneath LEGO® bricks, plates, and
tiles providing they are laid correctly
between the LEGO® studs. Do NOT
forcefully join LEGO® together around
cables; instead ensure they are laying
comfortably in between each stud.
CAUTION: Forcing LEGO® to connect
over a cable can result in damaging
the cable and light.
CONNECTING CABLE CONNECTORS
TO EXPANSION BOARDS
Take extra care when inserting
connectors to ports of Expansion
Boards. Connectors can be inserted
only one way. With the expansion
board facing up, look for the soldered
“=” symbol on the left side of the port.
The connector side with the wires
exposed should be facing toward the
soldered “=” symbol as you insert into
the port. If a plug won’t t easily into
a port connector, do not force it.
Incorrectly inserting the connector
can can result in bent pins inside the
port or possible overheating of the
expansion board when connected.
Before You Begin
BEFORE YOU BEGIN
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 5
CONNECTING CABLE CONNECTORS
TO STRIP LIGHTS
Take extra care when inserting
connectors to ports on the Strip
Lights. Connectors can be inserted
only one way. With the Strip Light
facing up, ensure the side of the
connector with the wires exposed is
facing down. If a plug won’t t easily
into a port connector, don’t force it.
Doing so will damage the plug and
the connector.
CONNECTING MICRO CABLE
CONNECTORS TO MICRO
EXPANSION BOARD PORTS
Take extra care when inserting the
micro connectors to micro ports of
Micro Expansion Boards. Connecting
Micro Bit Lights to Micro Expansion
Boards is similar to connecting lights
and cables to Strip Lights. With the
expansion board facing up, ensure the
side of the connector with the wires
exposed is facing down. If a plug won’t
t easily into a port connector, do not
force it. Use your ngernail to push
the plastic part of the connector to the
micro port.
Before You Begin
BEFORE YOU BEGIN
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 6
INSTALLING BIT LIGHTS UNDER
LEGO® BRICKS AND PLATES
When installing Bit Lights under
LEGO® pieces, ensure they are placed
the correct way up (Yellow LED
component exposed). You can either
place them directly on top of LEGO®
studs or in between.
Before You Begin
BEFORE YOU BEGIN
INSTALLATION GUIDE 7UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE
Instructions To ensure a smooth
installation of your light kit,
please read and follow each
step carefully.
If you run into any issues,
please refer to the online
troubleshooting guide.
STEPS
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
White Strip Lights x 6
1
2
5cm Connecting Cables
x 6
12-Port Expansion Board
3
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 9
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
4
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 10STEPS
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
USB Power Cable
Adhesive Squares x 2White 30cm Bit Light x 2
5
6
USB Power Bank / Wall Adaptor
(Sold Separately)
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 11
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
7
Flashing White 30cm Bit Light
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 12STEPS
8
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 13
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
9
Flashing White 30cm Bit Light
White 30cm Bit LightAdhesive Square
10
White 30cm Bit LightAdhesive Square
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 14STEPS
11
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 15
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
12
30cm Connecting Cable
13
30cm Connecting Cable
6-Port Expansion Board Multi Effects Board
Connect to the
Effects Board’s
IN port (+5V)
If you’re using a
USB Power Bank
small enough,
place it inside this
area
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 16
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
STEPS
14
15
White 30cm Bit LightAdhesive Square
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 17
16
STEPS
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
White 30cm Bit Light
17
30cm Connecting Cable
6-Port Expansion Board
White 30cm Bit LightAdhesive Square
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 18
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
18
STEPS
White 30cm Bit Light
Trans Red Round Plate 1x1
x 2
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 19
19
STEPS
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies
(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.
20
6-Port Expansion Board
30cm Connecting Cable
UCS MILLENNIUM FALCON 75192 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 20
LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT
21
STEPS
White 30cm Bit Light
Trans Clear Round Plate 1x1
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
LIGHT MY BRICKS 75192 Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
LIGHT MY BRICKS 75290 Operating instructions
-
-
-
-
-
-
-
-
-
