LIGHT MY BRICKS 75948 Operating instructions

INSTALLATION GUIDE 1HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE

Light My Bricks LEGO Hogwarts

Clock Tower 75948

Light Kit Installation Guide

INSTALLATION GUIDE 2HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE

Hi There, we’re Light My Bricks!

We’re here to help you get started on

the LEGO Hogwarts Clock Tower (75948)

Lighting Kit.

This PDF details the instructions for

the LED light kit only. If you are wishing

to purchase the Light My Bricks LEGO

Hogwarts Clock Tower (75948) LED

Lighting Kit , please click here to view

the product page.

If you run into any issues, please refer

to the troubleshooting section towards

the end of this guide.

Have fun and enjoy!

PACKAGE CONTENTS

PACKAGE CONTENTS:

6 × White 15cm Bit Lights

4 x White 30cm Bit Lights

3 x Cool White 30cm Bit Lights

2 x Blue 30cm Bit Lights

6 x Flashing White 15cm Micro Bit Lights

1 x 6-Port Expansion Board

2 x 8-Port Expansion Boards

1 x Micro 2-8 Port Expansion Board

1 x Flicker Effects Board

1 x 5cm Connecting Cable

3 x 30cm Connecting Cables

4 x Adhesive Squares

1 x USB Power Cable

LEGO PIECES:

3 × Trans Clear Slope 30 1x1x2/3

1 × Trans Clear Plate w Rounded Bottom 2×2

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 3

Contents 4. Before You Begin

8. Instructions

32. Final Product

33. Troubleshooting

38. Contact

CONTENTS

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 4

LAYING CABLES IN BETWEEN

AND UNDERNEATH BRICKS

Cables can t in between and

underneath LEGO® bricks, plates, and

tiles providing they are laid correctly

between the LEGO® studs. Do NOT

forcefully join LEGO® together around

cables; instead ensure they are laying

comfortably in between each stud.

CAUTION: Forcing LEGO® to connect

over a cable can result in damaging

the cable and light.

CONNECTING CABLE CONNECTORS

TO EXPANSION BOARDS

Take extra care when inserting

connectors to ports of Expansion

Boards. Connectors can be inserted

only one way. With the expansion

board facing up, look for the soldered

“=” symbol on the left side of the port.

The connector side with the wires

exposed should be facing toward the

soldered “=” symbol as you insert into

the port. If a plug won’t t easily into

a port connector, do not force it.

Incorrectly inserting the connector

can can result in bent pins inside the

port or possible overheating of the

expansion board when connected.

Before You Begin

BEFORE YOU BEGIN

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 5

CONNECTING CABLE CONNECTORS

TO STRIP LIGHTS

Take extra care when inserting

connectors to ports on the Strip

Lights. Connectors can be inserted

only one way. With the Strip Light

facing up, ensure the side of the

connector with the wires exposed is

facing down. If a plug won’t t easily

into a port connector, don’t force it.

Doing so will damage the plug and

the connector.

CONNECTING MICRO CABLE

CONNECTORS TO MICRO

EXPANSION BOARD PORTS

Take extra care when inserting the

micro connectors to micro ports of

Micro Expansion Boards. Connecting

Micro Bit Lights to Micro Expansion

Boards is similar to connecting lights

and cables to Strip Lights. With the

expansion board facing up, ensure the

side of the connector with the wires

exposed is facing down. If a plug won’t

t easily into a port connector, do not

force it. Use your ngernail to push

the plastic part of the connector to the

micro port.

Before You Begin

BEFORE YOU BEGIN

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 6

INSTALLING BIT LIGHTS UNDER

LEGO® BRICKS AND PLATES

When installing Bit Lights under

LEGO® pieces, ensure they are placed

the correct way up (Yellow LED

component exposed). You can either

place them directly on top of LEGO®

studs or in between.

Before You Begin

BEFORE YOU BEGIN

INSTALLATION GUIDE 7HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE

Instructions To ensure a smooth

installation of your light kit,

please read and follow each

step carefully.

If you run into any issues,

please refer to the online

troubleshooting guide.

STEPS

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 8

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

1 2

STEPS

White 30cm Bit Light

Trans Clear Slope 30 1x1x2/3

White 15cm Bit Light

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 9

3

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

STEPS

USB Power Cable

8-Port Expansion Board

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 10

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

4

5

STEPS

30cm Connecting Cable

6-Port Expansion Board

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 11

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

STEPS

White 15cm Bit Light

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 12STEPS

6

Cool White 30cm Bit Light

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 13

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

7 8

STEPS

White 30cm Bit Light

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 14

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

9

STEPS

White 15cm Bit Light

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 15

10

STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 16

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

11

STEPS

White 15cm Bit Light

Trans Clear Plate

w/ Rounded Bottom 2×2

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 17STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

Adhesive Squares

Tape

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALLATION GUIDE 18

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

STEPS

12

Adhesive Squares

White 30cm Bit Light

Trans Clear Slope 30 1x1x2/3

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 19

13

STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

30cm Connecting Cable

8-Port Expansion Board White 30cm Bit Light

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

HOGWARTS CLOCK TOWER 75948 LIGHT KIT INSTALLATION GUIDE INSTALATION GUIDE 20

14

STEPS

If you experience any issues with the lights not working and suspect an issue with a component, please try a different port on the expansion board to verify where the fault lies

(with the light or expansion board). To correct any issues with expansion board ports, please view the section addressing expansion board issues on our online troubleshooting guide.

Blue 30cm Bit Light

LEGEND: DISCONNECT TURN / FLIP TWIST / BRAIDDIRECTIONAL POWER ON / TESTCONNECT / RECONNECT

Page is loading ...

LIGHT MY BRICKS 75948 Operating instructions

LIGHT MY BRICKS 75948 Operating instructions

Related papers

Other documents